Resistance thermometer measuring transducer - MINI MCR-SL-PT100-UI - 2864435

The figure shows version MINI MCR-SL-PT100-UI-NC

MCR temperature transducer for Pt 100 temperature sensors, configured via DIP switch, with screw connection, pre-configured (pay attention to the order key)

Price:

Configuration

Overview

Technical data

Accessories

Approvals

Downloads

Product Description

The 6.2 mm wide MINI MCR-SL-PT100-UI... is a configurable 3-way isolated temperature measuring transducer. It is suitable for the connection of Pt 100 resistance thermometers according to IEC 60751 in 2, 3 and 4-wire connection methods.
On the output side, the analog standard signals 0...20 mA, 4...20 mA, 0...10 V, 0...5 V, 1...5 V, 10...0 V, 20...0 mA or 20...4 mA are available, electrically isolated.
The DIP switches are accessible on the side of the housing and allow the following parameters to be configured:
- Connection method
- Temperature range to be measured
- Output signal as well
- Fault evaluation type
Power (19.2 V DC to 30 V DC) can be supplied through connection terminal blocks on the modules or in conjunction with the DIN rail connector.

Your advantages

  • Power supply possible via the foot element (TBUS)
  • For 2, 3 or 4-wire Pt 100 sensors according to IEC 60751
  • Error indication via diagnostic LED and analog signal
  • Input and output signals can be configured via DIP switches
  • Temperature measuring range of -150°C to +850°C
  • Pt 100 signals to create standard signals
  • 3-way isolation
  • Highly-compact temperature transducer for electrical isolation, conversion, amplification, and filtering of
Logo Logo Logo

Key Commercial Data

Orderkey 2864435
Packing unit 1 pc
Note Made to Order (non-returnable)
Catalog page Page 105 (C-7-2015)
GTIN 4017918974855
Weight per Piece (excluding packing) 74.300 g
Custom tariff number 85437090

PHOENIX CONTACT Middle East FZ LLC

Office 301, Third Floor, Block 10
Dubai International Academic City (DIAC)
P.O. Box 345002
Dubai, United Arab Emirates
+971 4 4370324
  • Create PDF
  • Recommend
  • Feedback