The 6.2 mm wide MINI MCR-SL-PTB... power terminal is used for supplying the DIN rail connector with supply voltage.
Two separate voltage inputs allow a redundant voltage supply of 24 V DC and a maximum current of 2 A.
A green LED on the front panel lights up when there is supply voltage on the DIN rail connector. Red LEDs indicate supply voltages connected with reversed polarity. When the supply voltage has been connected correctly, the red LED extinguishes.
- For supplying the supply voltage via the foot element (DIN rail connector) where DC voltages of up to 30 V are already available
- For up to 2 A
- For up to 80 MINI Analog modules
- Redundant supply decoupled from diode possible
- Status and error indication via diagnostic LEDs
Key Commercial Data
||Page 118 (C-7-2015)
|Weight per Piece (excluding packing)
|Custom tariff number