Inline terminal - IB IL 24/230 DOR1/W-2MBD-PAC - 2862110

Inline, Relay terminal, Relay output: 1 (floating contacts), 24 V DC / 230 V AC, 3 A, for switching ohmic loads, Transmission speed in the local bus 2 Mbps, Degree of protection IP20, including Inline connector and labeling field



Technical data




Product Description

The digital output terminals are designed for the connection of digital actuators, such as electromagnetic valves, contactors or visual indicators.
All the typical applications are covered by the standard automation terminals.
The I/O equipment is connected by a simple or an extended Inline plug, depending on the number of channels. The multi-wire connection method is available in both cases.
The Inline relay terminal makes it possible to switch any I/O voltage up to a maximum of 230 V AC.
Therefore, a relay with a floating PDT contact is integrated in the terminal. Connection to the I/O devices is made with a simple Inline plug.
The Inline terminals can be labeled using hinged labeling fields. The fields have insert cards that can be labeled individually to suit the application. Additionally, there is the proven ZBFM-6... Zack strip for labeling the terminal points.

Your advantages

  • Safe isolation
  • Floating connection for one actuator
  • Nominal current at the output: 3 A
  • Total current of the terminal: 3 A
  • Diagnostic and status indicators

Key Commercial Data

Orderkey 2862110
Packing unit 1 pc
Catalog page Page 279 (AX-2009)
GTIN 4017918974732
Weight per Piece (excluding packing) 46.000 g
Custom tariff number 85389091


Office 301, Third Floor, Block 10
Dubai International Academic City (DIAC)
P.O. Box 345002
Dubai, United Arab Emirates
+971 4 4370324
  • Create PDF
  • Recommend
  • Feedback