Temperature measuring transducer - MINI MCR-SL-PT100-LP - 2810298

The figure shows version MINI MCR-SL-PT100-LP-NC

Configurable loop-powered temperature transducer for Pt 100 temperature sensors, configured via DIP switches, with screw connection, pre-configured (please observe the order key)

Price:

Configuration

Overview

Technical data

Approvals

Downloads

Product Description

The 6.2 mm wide MINI MCR-SL-PT100-LP... is a configurable loop-powered temperature measuring transducer. It is suitable for the connection of Pt 100 resistance thermometers according to IEC 60751 in 2, 3, and 4-wire connection methods.
On the output side the module is operated in a 4...20 mA current loop, which simultaneously provides the required supply power for signal conversion.
The DIP switches, which can be accessed on the side of the housing, can be used to configure the following parameters:
– Connection method
– Temperature range to be measured
– Output signal
– Type of error evaluation

Your advantages

  • 2, 3 or 4-wire Pt 100 sensors
  • Highly-compact loop-powered temperature transducer for electrical isolation, conversion, amplification, and filtering of Pt 100 signals to create standard signals
  • Does not require additional auxiliary voltage
  • Error indication via diagnostic LED and analog signal
  • Supplied by an output loop
  • Input signals can be configured via DIP switches
  • Temperature measuring range of -150°C to +300°C
  • 2-way isolation
Logo Logo Logo

Key Commercial Data

Orderkey 2810298
Packing unit 1 pc
Note Made to Order (non-returnable)
Catalog page Page 106 (C-7-2015)
GTIN 4046356151986
Weight per Piece (excluding packing) 67.600 g
Custom tariff number 85437090

PHOENIX CONTACT Middle East FZ LLC

Office 301, Third Floor, Block 10
Dubai International Academic City (DIAC)
P.O. Box 345002
Dubai, United Arab Emirates
+971 4 4370324
  • Create PDF
  • Recommend
  • Feedback