The CANopen® fieldbus coupler enables the flexible INTERBUS Inline automation kit to be operated in CANopen® networks as well. The fieldbus coupler allows an INTERBUS Inline station to be inserted at any point in a CANopen® network. The fieldbus coupler is a slave in the CANopen® network and a master in the lower-level INTERBUS Inline local bus.
The address of the CANopen® slave can easily be set via DIP switches from outside. The CANopen® network is connected via a Twin Combicon plug. The operating voltage for the fieldbus coupler and the electronics can be fed using a separate power plug.
For the CANopen® project planning, a regularly updated EDS file (Electronica Data Sheet) is provided in the Product Information Service (see below). The CANopen® fieldbus coupler supports the proven INTERBUS Inline diagnostics as well as the typical diagnostics objects for CANopen®. Local LEDs enable precise diagnostics.
Please note the following when you configure the system:
The total logic current of all terminals connected to a CANopen® network must not exceed the maximum permissible total current of 2 A. Therefore, depending on your configuration, the number of terminal blocks that you can connect may be less than 63.
Innovations for your success – experience them now.Discover the HIGHLIGHTS
Connectors and connection systems for AC and DC.Find out more