Safety module - IB IL 24 PSDOR 4-F-PAC - 2700563

Shows the IB IL PSDOR 4-PAC version

Safety-related distributed relay output module, IP20 protection, for the PROFIsafe system. The module has 4 safe digital relay outputs, each with two contacts. The output states are mirrored for diagnostic purposes.



Technical data




Product Description

The safety module is an output module from the Inline product range, designed for use in a PROFIsafe system. The safety module can be used as a part of an Inline station at any point within a PROFIsafe Inline system.
The transmission speed of the safety module can be set to 500 kbaud or 2 Mbaud using a switch. Only one transmission speed must be used uniformly within a station. The module has four safe digital relay outputs, each with two relay contacts. The outputs can be parameterized according to the application and enable the integration of actuators in the PROFIsafe system.
The safety-related segment circuit can be switched on or off using suitable wiring.
When the output is switched off, the supply to the subsequent modules is disconnected safely.
The module also has two clock outputs with assigned alarm inputs for monitoring external contact extensions.
Depending on the installation and parameterization, in these systems the safety module can achieve the following safety integrity:
- Up to SIL 3 according to standard EN 61508
- Up to SIL CL 3 according to standard EN 62061
- Up to Cat. 4/PL e according to standard EN ISO 13849-1

Key Commercial Data

Orderkey 2700563
Packing unit 1 pc
Note Made to Order (non-returnable)
GTIN 4046356583169
Weight per Piece (excluding packing) 462.800 g
Custom tariff number 85371098


Office 301, Third Floor, Block 10
Dubai International Academic City (DIAC)
P.O. Box 345002
Dubai, United Arab Emirates
+971 4 4370324
  • Create PDF
  • Recommend
  • Feedback