1. Etusivu
  2. Tuotteet
  3. Uninterruptible power supplies (UPS)
  4. AC UPS
  5. Uninterruptible power supply - QUINT4-UPS/1AC/1AC/1KVA

Uninterruptible power supply - QUINT4-UPS/1AC/1AC/1KVA
2320283

Uninterruptible power supply with IQ technology for DIN rail mounting. Input: 120/230 V AC, output: 120/230 V AC/1 kVA. Provides information regarding the state of charge, remaining runtime, and service life of the rechargeable battery module at any time, thereby increasing system availability.

Downloads

Tuotetiedot

Supply AC loads reliably with the uninterruptible power supply from the QUINT range for DIN rails. Due to the online topology, the AC UPS delivers a pure sine curve in mains and battery operation. Combine the online UPS with various UPS-BAT energy storage devices. The USB interface makes it convenient to shut down your PC.

AC operation
Input voltage 100 V AC -10 % / +20 %
110 V AC -10 % / +20 %
120 V AC -10 % / +20 %
130 V AC -10 % / +20 %
200 V AC -20 % / +20 %
210 V AC -20 % / +20 %
220 V AC -20 % / +20 %
230 V AC -20 % / +15 %
240 V AC -20 % / +10 %
Input voltage range 90 V AC ... 264 V AC
Input voltage range AC 184 V AC ... 264 V AC
96 V AC ... 144 V AC
Typical national grid voltage 120 V AC
230 V AC
Voltage type of supply voltage AC
AC frequency range 45 Hz ... 65 Hz
Buffer period 1 h (38 AH)
Current consumption 10.4 A (100 V AC)
10.5 A (110 V AC)
10.5 A (120 V AC)
9.7 A (130 V AC)
6.4 A (200 V AC)
6 A (210 V AC)
5.7 A (220 V AC)
5.5 A (230 V AC)
5.3 A (240 V AC)
Variable connect threshold Can be configured using UPS-CONF software
Power factor (cos phi) 0.9
Bypass fuse T 15 A / 250 V (MDA -15-R)
Permissible backup fuse B16 230 V AC
Permissible backup fuse 20 A (120 V AC, Listed breaker)
Digital Control (configurable)
Designation Remote
Low signal Connection to SGnd with < 2.7 kΩ
High signal Open (> 35 kΩ between Remote and SGnd)
Digital Control Low-Active (configurable)
Battery-operated start 120 V AC low signal Connection to SGnd with < 2.7 kΩ
Battery-operated start 120 V AC high signal Open (> 200 kΩ between Bat.-Start and SGnd)
Classification according to IEC 62040-3 VFI-SS-111
Efficiency > 92 % (120 V AC)
> 94 % (230 V AC)
Nominal output voltage 100 V AC
110 V AC
120 V AC
130 V AC
200 V AC
210 V AC
220 V AC
230 V AC
240 V AC
Form of output voltage Pure sine
Nominal output current (IN) 7.8 A (100 V AC)
8.1 A (110 V AC)
8.3 A (120 V AC)
7.7 A (130 V AC)
5 A (200 V AC)
4.8 A (210 V AC)
4.5 A (220 V AC)
4.3 A (230 V AC)
4.2 A (240 V AC)
POWER BOOST (IBoost) 13 A (120 V AC)
7 A (230 V AC)
Output power 778 VA (700 W)
889 VA (800 W)
1000 VA (900 W)
1000 VA (900 W)
1000 VA (900 W)
1000 VA (900 W)
1000 VA (900 W)
1000 VA (900 W)
1000 VA (900 W)
Apparent power 1 kVA (UN  120 V AC)
Nominal power 900 W (UN  120 V AC)
Maximum no-load power dissipation typ. 17 W (120 V AC)
typ. 25 W (230 V AC)
Power loss nominal load max. typ. 79 W (120 V AC)
typ. 55 W (230 V AC)
Crest factor 2.8
Switch-over time 0 ms
Connection in parallel yes, 2
Connection in series No
Mains operation
Nominal output voltage 120 V AC ±2 %
230 V AC ±2 %
Nominal output current (IN) 8.3 A
4.3 A (230 V AC)
POWER BOOST (IBoost) 13 A
7 A
Battery operation
Nominal output voltage 120 V AC ±2 %
230 V AC ±2 %
Nominal output current (IN) 4.3 A (230 V AC)
8.3 A (120 V AC)
POWER BOOST (IBoost) 7 A (230 V AC)
13 A (120 V AC)
Nominal output frequency ± 60 Hz ±0.5 % (At an input frequency of 55 Hz to < 65 Hz)
± 50 Hz ±0.5 % (At an input frequency of 45 Hz to < 55 Hz)
Signal: AC OK
Output voltage 24 V
Continuous load current ≤ 20 mA
Signal: Alarm
Output voltage 24 V
Continuous load current ≤ 20 mA
Signal: Battery mode
Output voltage 24 V
Continuous load current ≤ 20 mA
Signal: Ready
Output voltage 24 V
Continuous load current ≤ 20 mA
Signal: P>Pn
Output voltage 24 V (SELV)
Continuous load current ≤ 20 mA
Signal: AC OK
Output voltage 24 V
Continuous load current ≤ 20 mA
Signal: Alarm
Output voltage 24 V
Continuous load current ≤ 20 mA
Signal: Battery mode
Output voltage 24 V
Continuous load current ≤ 20 mA
Signal: Ready
Output voltage 24 V
Continuous load current ≤ 20 mA
Signal: P>Pn
Output voltage 24 V (SELV)
Continuous load current ≤ 20 mA
Signal: AC OK
Output voltage 24 V
Continuous load current ≤ 20 mA
Signal: Alarm
Output voltage 24 V
Continuous load current ≤ 20 mA
Signal: Battery mode
Output voltage 24 V
Continuous load current ≤ 20 mA
Signal: Ready
Output voltage 24 V
Continuous load current ≤ 20 mA
Signal: P>Pn
Output voltage 24 V (SELV)
Continuous load current ≤ 20 mA
Signal: AC OK
Output voltage 24 V
Continuous load current ≤ 20 mA
Signal: Alarm
Output voltage 24 V
Continuous load current ≤ 20 mA
Signal: Battery mode
Output voltage 24 V
Continuous load current ≤ 20 mA
Signal: Ready
Output voltage 24 V
Continuous load current ≤ 20 mA
Signal: P>Pn
Output voltage 24 V (SELV)
Continuous load current ≤ 20 mA
Signal: AC OK
Output voltage 24 V
Continuous load current ≤ 20 mA
Signal: Alarm
Output voltage 24 V
Continuous load current ≤ 20 mA
Signal: Battery mode
Output voltage 24 V
Continuous load current ≤ 20 mA
Signal: Ready
Output voltage 24 V
Continuous load current ≤ 20 mA
Signal: P>Pn
Output voltage 24 V (SELV)
Continuous load current ≤ 20 mA
Signal: AC OK
Output voltage 24 V
Continuous load current ≤ 20 mA
Signal: Alarm
Output voltage 24 V
Continuous load current ≤ 20 mA
Signal: Battery mode
Output voltage 24 V
Continuous load current ≤ 20 mA
Signal: Ready
Output voltage 24 V
Continuous load current ≤ 20 mA
Signal: P>Pn
Output voltage 24 V (SELV)
Continuous load current ≤ 20 mA
Nominal voltage UN 2x 24 V DC
End-of-charge voltage 58 V (temperature compensated)
Charge current 5 A
Nominal capacity range 3.4 Ah ... 190 Ah (5x 38 Ah)
Battery technology VRLA, VRLA-WTR, LI-ION
Charge characteristic curve IU0U
Permissible backup fuse 50 A /  58 V
Input
Connection method Screw connection
Conductor cross section solid min. 0.2 mm²
Conductor cross section solid max. 6 mm²
Conductor cross section flexible min. 0.2 mm²
Conductor cross section flexible max. 4 mm²
Single conductor/flexible terminal point with ferrule with plastic sleeve, min. 0.25 mm²
Single conductor/flexible terminal point with ferrule with plastic sleeve, max. 4 mm²
Single conductor/flexible terminal point with ferrule without plastic sleeve, min. 0.25 mm²
Single conductor/flexible terminal point with ferrule without plastic sleeve, max. 4 mm²
Conductor cross section AWG min. 30
Conductor cross section AWG max. 10
Stripping length 8 mm
Tightening torque, min 0.5 Nm
Tightening torque max 0.6 Nm
Output
Connection method Screw connection
Conductor cross section solid min. 0.2 mm²
Conductor cross section solid max. 6 mm²
Conductor cross section flexible min. 0.2 mm²
Conductor cross section flexible max. 4 mm²
Single conductor/flexible terminal point with ferrule with plastic sleeve, min. 0.25 mm²
Single conductor/flexible terminal point with ferrule with plastic sleeve, max. 4 mm²
Single conductor/flexible terminal point with ferrule without plastic sleeve, min. 0.25 mm²
Single conductor/flexible terminal point with ferrule without plastic sleeve, max. 4 mm²
Conductor cross section AWG min. 30
Conductor cross section AWG max. 10
Stripping length 8 mm
Tightening torque, min 0.5 Nm
Tightening torque max 0.6 Nm
Signal
Connection method Screw connection
Conductor cross section solid min. 0.2 mm²
Conductor cross section solid max. 2.5 mm²
Conductor cross section flexible min. 0.2 mm²
Conductor cross section flexible max. 2.5 mm²
Single conductor/flexible terminal point with ferrule with plastic sleeve, min. 0.2 mm²
Single conductor/flexible terminal point with ferrule with plastic sleeve, max. 2.5 mm²
Single conductor/flexible terminal point with ferrule without plastic sleeve, min. 0.2 mm²
Single conductor/flexible terminal point with ferrule without plastic sleeve, max. 2.5 mm²
Conductor cross section AWG min. 30
Conductor cross section AWG max. 12
Stripping length 8 mm
Tightening torque, min 0.5 Nm
Tightening torque max 0.6 Nm
Interface MINI-USB type B
Features lockable
Maximum cable length 3 m
Types of signaling LED
Active switching output
Signal output: Transistor output, active
Signalization designation AC OK
Status display LED
Color green
Signal output: Transistor output, active
Signalization designation Alarm
Status display LED
Color red
Signal output: Transistor output, active
Signalization designation Battery mode
Status display LED
Color yellow
Signal output: Transistor output, active
Signalization designation Ready
Signal output: Transistor output, active
Signalization designation P>Pn
Status display LED
Color green
Signal output
Signalization designation Reference potential for the signal inputs and outputs
Number of phases 1.00
Product type Uninterruptible power supply, AC
MTBF (IEC 61709, SN 29500) 217546 h (230 V AC, at 40 °C)
Insulation characteristics
Protection class I
Overvoltage category II
Life expectancy (electrolytic capacitors)
Time 68970 h
Width 290 mm
Height 130 mm
Depth 125 mm
Installation dimensions
Installation distance right/left 5 mm / 5 mm
Installation distance top/bottom 50 mm / 50 mm
Mounting type DIN rail mounting
Housing material Metal
Hood version Sheet steel, DIN EN ISO2081 coat - Fe/Zn 18/B/TopCoat transparent blue
Side element version Aluminum plate, DIN EN 573-3
Ambient conditions
Degree of protection IP20
Ambient temperature (operation) -25 °C ... 60 °C (> 50 °C: 2,5 % / K)
Ambient temperature (storage/transport) -40 °C ... 85 °C
Maximum altitude ≤ 3000 m (> 2000 m: 0,6 % / 100 m)
Climatic class 3K3 (EN 60721)
Max. permissible relative humidity (operation) ≤ 95 %
Shock 15g in all directions (EN 60068-2-27)
Vibration (operation) 5 Hz ... 100 Hz, 0.7g (EN 60068-2-6)
Uninterruptible power supply systems
Standards/specifications EN 62040-1
UL
Identification UL/C-UL Recognized UL 1778
Low Voltage Directive Conformance with Low Voltage Directive 2014/35/EC
Electromagnetic compatibility Conformance with EMC Directive 2014/30/EU
Conducted noise emission EN 62040-02 (Class C2)
Interference emission Noise emission in accordance with EN 62040-2
Noise immunity Immunity according to EN 61000-6-1 (residential), EN 61000-6-2 (industrial)
Immunity in accordance with EN 62040-2
Electrostatic discharge
Standards/regulations EN 61000-4-2
Electrostatic discharge
Contact discharge ± 6 kV
Discharge in air ± 8 kV
Comments Criterion A
Electromagnetic HF field
Standards/regulations EN 61000-4-3
Electromagnetic HF field
Frequency range 80 MHz ... 6 GHz
Test field strength 10 V/m
Comments Criterion A
Fast transients (burst)
Standards/regulations EN 61000-4-4
Fast transients (burst)
Input ± 2 kV
± 2 kV
Output ± 2 kV
Signal ± 2 kV
± 2 kV (USB)
Comments Criterion A (B for USB)
Surge voltage load (surge)
Standards/regulations EN 61000-4-5
Signal 1 kV (asymmetrical)
Comments Criterion A
Input/Output ± 1 kV (symmetrical)
± 2 kV (asymmetrical)
Conducted interference
Standards/regulations EN 61000-4-6
Conducted interference
Frequency range 0.15 MHz ... 80 MHz
Comments Criterion A
Voltage 10 V
Power frequency magnetic field
Standards/regulations EN 61000-4-8
Frequency 50 Hz
60 Hz
Test field strength 100 A/m
Comments Criterion A
Criterion A Normal operating behavior within the specified limits.
Criterion B Temporary impairment to operational behavior that is corrected by the device itself.
Tuotenumero 2320283
Pakkausyksikkö 1 Kappaletta
Vähimmäistilausmäärä 1 Kappaletta
Tuoteavain CMUI15
Tuotekoodi CMUI15
Luettelosivu Sivu 331 (C-4-2019)
GTIN 4055626244563
Paino kappaletta kohti (sis. pakkauksen) 5 630 g
Paino kappaletta kohti (ilman pakkausta) 5 530 g
Tullitariffinumero 85371091
Alkuperämaa DE

ECLASS

ECLASS-9.0 27040705
ECLASS-10.0.1 27040705
ECLASS-11.0 27040705

ETIM

ETIM 8.0 EC000382

UNSPSC

UNSPSC 21.0 39121000

cUL Recognized

Approval ID: FILE E 342453

UL Recognized

Approval ID: FILE E 342453

IECEE CB Scheme

Approval ID: DK-70737-UL

EAC

Approval ID: RU S-DE.BL08.W.00764

DNV GL

Approval ID: TAA00002JM

EAC

Approval ID: RU-DE.B.00184/20

cUL Recognized

Approval ID: FILE E 359066

UL Recognized

Approval ID: FILE E 359066

cULus Recognized

cULus Recognized

China RoHS Environmentally friendly use period: unlimited = EFUP-e
No hazardous substances above threshold values

Yhteensopivat tuotteet

Edut

Smooth transition due to online topology
Pure sine curve in mains and battery operation
USB interface for connecting to industrial PCs, for example
Startup from energy storage possible, even without mains input
Can be switched in parallel for redundancy and increased performance