Contact insert - SACC-CI-M12FS-8CON-L90 SH SCO 1437009

Sensor/actuator flush-type connector, socket, 8-pos., A-coded, shielded, with angled solder connection, only contact insert


Product Details




Notes on operation The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration.

Number of positions 8
Type of contact Socket
Coding A - standard
Insulation characteristics
Overvoltage category II
Degree of pollution 3

Mounting type PCB mounting

Flammability rating according to UL 94 V0
Sealing material FKM / EPDM
Contact material CuZn
Contact surface material Au
Contact carrier material PA 6.6

Insertion/withdrawal cycles > 100
Header 1
Type Flush-type socket, straight

Status display No
Status display present No

Rated surge voltage 0.8 kV
Contact resistance ≤ 3 mΩ
Insulation resistance ≥ 100 MΩ
Nominal voltage UN 30 V
Nominal current IN 2 A

Standards/specifications IEC 61076-2-101

Ambient conditions
Degree of protection IP67
Degree of protection IP67
Ambient temperature (operation) -25 °C ... 85 °C (Plug / socket)
-40 °C ... 85 °C (without mechanical actuation)


Order Key 1437009
Packing unit 20 pc
Minimum order quantity 1 pc
Sales Key 021
Catalog Page Page 252 (C-2-2013)
GTIN 4046356438575
Weight per Piece (including packing) 5,6 GRM
Weight per Piece (excluding packing) 5,3 GRM
Customs tariff number 85366990
Country of origin DE



UL Recognized

Approval Specification Data
Nominal voltage UN 30 V
Nominal current IN 2 A
AWG/kcmil 24
Max. cross section 24 mm²

EAC


REACh SVHC Lead 7439-92-1
China RoHS Environmentally Friendly Use Period = 50 years
China RoHS For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration”


Your advantages

Reduced mounting costs thanks to two-piece device connector
All common pin assignments and codings available
Easy device integration thanks to mechanical port screw connections with threaded attachment, press-in contour or direct integration in the front plate
Additional gasket for the device when not plugged in