Retainer for Vehicle Connector as parking position at charging stations for E-Mobility (EVSE)
CHARX connect, Charging connector holder, for vehicle charging connectors on charging stations (EVSE), Type 2, IEC 62196-2, Front mounting, D-Line, “PHOENIX CONTACT” logo
Retainer for Vehicle Connector as parking position at charging stations for E-Mobility (EVSE)
| Product type | Charging connector holder |
| Application | for vehicle charging connectors on charging stations (EVSE) |
| Affixed logo | “PHOENIX CONTACT” logo |
| Charging standard | Type 2 |
| Charging mode | Mode 3 |
| Type of charging current | AC |
| Dimensional drawing |
|
| Width | 75 mm |
| Height | 75 mm |
| Depth | 44.7 mm |
| Bore dimensions | 60 mm x 60 mm |
| Color Housing | black |
| Flammability rating according to UL 94 | V0 |
| Material | Plastic |
| Securing | With locking clips for locking contour |
| Removal | Lifting and removal |
| Ambient conditions | |
| Degree of protection (when plugged in) | IP54 |
| Degree of protection | IP54 |
| Ambient temperature (operation) | -30 °C ... 50 °C |
| Ambient temperature (storage/transport) | -40 °C ... 80 °C |
| Standards | |
| Standards/regulations | IEC 62196-2 |
| Mounting type Front mounting 0 to 45 degree frontal inclination possible | Front mounting 0 to 45 degree frontal inclination possible |
| Possible mounting positions | Front mounting |
| Restrictions to mounting position | Only 0 to 45 degree frontal inclination possible, see figure |
| Mounting hole diameter | 6.00 mm (ø) |