EV-CC-AC1-M3-RCM-ETH-3G-XP - AC charging controller - 1139452

Product properties

Product type	AC charging controller
Product family	CHARX control advanced plus
Application	AC charging controller for private and commercial applications (EU/CN)
Operating mode	Stand-Alone
	Client
	Server
Charging mode	Mode 3, Case B + C

System properties

Charging controllers
Number of charging points	1

Electrical properties

Type of charging current	AC
Current consumption	< 3 W (No-load)
Power consumption	< 10 W
Locking release in the event of mains failure	Integrated release function of the locking actuator for disconnection of Infrastructure Plug and Infrastructure Socket Outlet
Measuring current transducer
Connection method	Connector
Diameter of measuring coil	15 mm
Measuring range: Residual current
Rated frequency f_n	≤ 2000 Hz
Nominal differential current	± 300 mA
Residual current I_Δn	30 mA (AC)
Residual current I_Δn		6 mA (DC)
Rated current I_n	32 A (Three-phase, 4x6 mm²)
Rated current I_n		48 A (Single-phase)
Tripping time for I_Δn	< 180 ms
Response time for 2 x I_Δn	< 70 ms
Tripping time for 5xI_Δn	< 20 ms
Supply
Supply voltage	230 V
Supply voltage range	100 V AC ... 240 V AC (nominal voltage range)
Nominal power consumption	< 3 W (No-load)
Power consumption	< 10 W (maximum)
Frequency range	50 Hz ... 60 Hz

Input data

Digital
Number of digital inputs	5
Description of the input	Digital input
Nominal current I_N	≤ 4 mA
Nominal input voltage U_N	12 V
Input voltage range	0 V ... 3 V (Off)
Input voltage range U2	9 V ... 15 V (On)

Output data

Digital
Output name	4 digital outputs
Connection technology	Screw connection
Maximum output voltage	30 V
Maximum output current	0.2 A (Total current for all outputs; internally supplied)
Maximum output current per channel	0.6 A (Per output; externally supplied)
Switching
Output name	Relay output C_1.2
Minimum switching capacity	4000 VA
Maximum switching voltage	250 V AC (External supply)
Max. switching current	16 A
Switching
Output name	Motor switching output
Maximum switching voltage	12 V (Internal supply)
Max. switching current	1 A (maximum)

Connection data

Conductor connection
Connection method	Screw connection
Conductor cross section rigid	0.2 mm² ... 4 mm²
Conductor cross section flexible	0.2 mm² ... 2.5 mm²
Conductor cross section AWG	24 ... 12
Conductor connection
Connection method	Screw connection
Conductor cross section rigid	0.14 mm² ... 1.5 mm²
Conductor cross section flexible	0.2 mm² ... 1 mm²
Conductor cross section AWG	26 ... 16

Interfaces

Interface	Ethernet (1x)
Interface		Cellular communication (3G/2G)
Wireless
Interface description	HSPA/GSM/GPRS/EDGE cellular interface for communicating with higher-level management systems using the OCPP 1.6J communication protocol
Frequency	900 MHz (HSPA)
		2100 MHz (HSPA)
		850 MHz (GSM/GPRS/EDGE )
		900 MHz (GSM/GPRS/EDGE )
		1800 MHz (GSM/GPRS/EDGE )
		1900 MHz (GSM/GPRS/EDGE )
Transmission power	2 W (GSM 850 (Class 4))
		2 W (GSM 950 (Class 4))
		1 W (GSM 1800 (Class 1))
		1 W (GSM 1900 (Class 1))
		+ 24 dBm (UMTS/HSPA (Class 3))
Number	1
Connection method	SMA (male)
Impedance	50 Ω
SIM Interface	Micro SIM (3FF)
Protocols supported	OCPP 1.6J
RS-485
Interface	RS-485 2-wire
Bus system	RS-485
Connection method	Screw connection
Number of interfaces	1 (for energy measurement device and RFID reader)
Number of supported devices	2
Transmission speed range	4.8 kbps ... 115.2 kbps (adjustable)
Protocols supported	Modbus/RTU (Master)
Ethernet
Interface	Ethernet
Connection method	RJ45 jack
Number of interfaces	1
Serial transmission speed	10/100 Mbps
Transmission length	100 m
Protocols supported	Modbus/TCP
Protocols supported		OCPP 1.6J

Signaling

Status display	5x LEDs

Environmental and real-life conditions

Ambient conditions
Degree of protection	IP20
Ambient temperature (operation)	-25 °C ... 60 °C
Ambient temperature (storage/transport)	-40 °C ... 85 °C
Altitude	< 2000 m
Permissible humidity (operation)	30 % ... 95 % (non-condensing)

Approvals

Conformity/Approvals
Conformance	CE-compliant

EMC data

Low Voltage Directive	Conformance with Low Voltage Directive 2014/35/EC
Noise immunity	EN 61000-6-2
Immunity to the discharge of static electricity	EN 61000-4-2: 8 kV air, 4 kV contact discharge
Immunity to electromagnetic fields	EN 61 000-4-3, 80---1000 MHz, 10 V/m
Immunity to conducted high frequency	EN 61 000-4-6, 0.15...80 MHz, 10 V
Immunity to fast transients (Burst)	EN 61 000-4-4, 2 kV pos. and neg., 5 kHz
Electromagnetic compatibility	Conformance with EMC Directive 2014/30/EU
Housing	DIN 43880
Noise emission	EN 61000-6-3

Standards and regulations

Standards
Standards/regulations	IEC 61851-1

Mounting

Mounting type	DIN rail mounting
Assembly instructions	DIN rail mounting
Mounting position	any

Item number	1139452
Packing unit	1 pc
Minimum order quantity	1 pc
Sales key	XWB
Product key	XWBBCB
GTIN	4063151087517
Weight per piece (including packing)	612.9 g
Weight per piece (excluding packing)	599.6 g
Customs tariff number	85371098
Country of origin	DE

ECLASS-11.0	27144703
ECLASS-12.0	27144703
ECLASS-13.0	27144703

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

EV-CC-AC1-M3-RCM-ETH-3G-XP - AC charging controller

1139452

Product details

ECLASS

ETIM

UNSPSC

Compatible products


China RoHS	Environmentally Friendly Use Period = 50 years
		For information on hazardous substances, refer to the manufacturer’s declaration available under “Downloads”

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

EV-CC-AC1-M3-RCM-ETH-3G-XP - AC charging controller 1139452

Product details

ECLASS

ETIM

UNSPSC

Compatible products

EV-T2SC - Protective cover 1405217

EEM-EM357 - Measuring instrument 2908588

EV-CC-AC1-M3-RCM-ETH-3G-XP - AC charging controller

1139452