TAE-TRAB FM-NFN-AP
-
Surge protection device
2749628
TAE outlet box (NFN) for surface mounting with surge protection for analog and digital telecommunications interfaces (VDSL up to 50 Mbps, on short paths (< 300 m) up to 100 Mbps)
Product details
| Product family | DATATRAB |
| IEC test classification | B2 |
| C1 | |
| C2 | |
| C3 | |
| D1 | |
| VDE requirement class | B2 |
| C1 | |
| C2 | |
| C3 | |
| D1 | |
| Type | Socket for surface mounting |
| For country-specific use in | D |
| Surge protection fault message | none |
| Wire pairs per module | 1 |
| Insulation characteristics | |
| Overvoltage category | II |
| Nominal voltage UN | 60 V DC |
| Connection method | Screw connection & TAE 6 |
| Screw thread | M3 |
| Tightening torque | 0.5 Nm |
| Conductor cross-section flexible | 0.14 mm² ... 1.5 mm² |
| Conductor cross-section rigid | 0.14 mm² ... 1.5 mm² |
| Conductor cross-section AWG | 26 ... 16 |
| Dimensional drawing |
|
| Width | 65 mm |
| Height | 27 mm |
| Depth | 80 mm |
| Color | cream (RAL 9001) |
| Housing material | ABS |
| Mechanical data | |
| Open side panel | No |
| Direction of action | Line-Line & Line-Earth Ground |
| Nominal voltage UN | 60 V DC |
| Maximum continuous operating voltage UC | 185 V DC |
| Rated current | 450 mA (≤ 40°C) |
| Operating effective current IC at UC | ≤ 10 µA |
| Protective conductor current IPE | ≤ 6 µA |
| Nominal discharge current In (8/20) µs (line-line) | 5 kA |
| Nominal discharge current In (8/20) µs (line-ground) | 5 kA |
| Total discharge current ITotal (8/20) µs | 10 kA |
| Total discharge current ITotal (10/350) µs | 5 kA |
| Max. discharge current Imax (8/20) µs maximum (line-line) | 5 kA |
| Max. discharge current Imax (8/20) µs maximum (line-earth) | 5 kA |
| Nominal pulse current Ian (10/1000) µs (line-line) | 100 A |
| Nominal pulse current Ian (10/1000) µs (line-earth) | 100 A |
| Nominal pulse current Ian (10/700) µs (line-line) | 150 A |
| Nominal pulse current Ian (10/700) µs (line-earth) | 150 A |
| Output voltage limitation at 1 kV/µs (line-line) spike | ≤ 250 V |
| Output voltage limitation at 1 kV/µs (line-earth) spike | ≤ 450 V |
| Output voltage limitation at 1 kV/µs (line-line) static | ≤ 250 V |
| Output voltage limitation at 1 kV/µs (line-earth) static | ≤ 450 V |
| Voltage protection level Up (line-line) | ≤ 250 V (C2 - 10 kV / 5 kA) |
| ≤ 250 V (C1 - 1 kV / 500 A) | |
| ≤ 250 V (B2 - 4 kV / 100 A) | |
| Voltage protection level Up (line-earth) | ≤ 500 V (C2 - 10 kV / 5 kA) |
| ≤ 450 V (C1 - 1 kV / 500 A) | |
| ≤ 400 V (B2 - 4 kV / 100 A) | |
| Response time tA (line-line) | ≤ 1 ns |
| Response time tA (line-earth) | ≤ 100 ns |
| Input attenuation aE, sym. | 0.3 dB (≤ 1 MHz / 150 Ω) |
| 0.3 dB (≤ 400 kHz / 600 Ω) | |
| Input attenuation aE, asym. | 0.3 dB (≤ 400 kHz / 600 Ω) |
| Cut-off frequency fg (3 dB), sym. in 150 Ω system | typ. 8 MHz |
| Cut-off frequency fg (3 dB), sym. in 600 Ω system | typ. 2 MHz |
| Capacity (Core-Core) | typ. 200 pF (f = 1 MHz / VR = 0 V) |
| Capacity (Core-Earth) | typ. 15 pF (f = 1 MHz / VR = 0 V) |
| Resistance per path | 2.2 Ω 10 % |
| Short-circuit current self-quenching | 150 mA |
| Surge protection fault message | none |
| Impulse durability (line-line) | C2 - 10 kV / 5 kA |
| C1 - 1 kV / 500 A | |
| B2 - 4 kV / 100 A | |
| Impulse durability (line-earth) | C2 - 10 kV / 5 kA |
| C1 - 1 kV / 500 A | |
| B2 - 4 kV / 100 A | |
| D1 - 2.5 kA | |
| Alternating current carrying capacity (line-earth) | 5 A - 1 s |
| Ambient conditions | |
| Degree of protection | IP20 |
| Ambient temperature (operation) | -40 °C ... 80 °C |
| VDE requirement class | B2 |
| C1 | |
| C2 | |
| C3 | |
| D1 | |
| Standards Information technology specification | |
| Standards/regulations | IEC 61643-21 |
| IEC 61643-21 | |
| Air clearances and creepage distances | |
| Standards/regulations | VDE 0110-1 / IEC 60664-1 |
| Standards/specifications | DIN EN 61643-21 |
| Note | 2002 |
| Standards/specifications | IEC 61643-21 |
| Note | 2000 |
| Mounting type | Surface/Panel mounting |
Your advantages
Easy connection via TAE socket
Easy installation with surface mounting
No signal interference with adapted protective circuit