RAD-900-DAIO6 - Wireless module - 2702877

Notes

Note on application
Note on application	Only for industrial use
Trade restriction
CE note	The products are offered exclusively for export outside the EU and the European Economic Area.

Product properties

Product type	Wireless module
Insulation characteristics
Overvoltage category	II
Degree of pollution	2

Electrical properties

Electrical isolation	300 V (Rated insulation voltage (in each case between the analog inputs/analog outputs/AC supply, reinforced insulation according to EN 61010))
		50 V (Rated insulation voltage (in each case between the analog inputs/analog outputs/DC supply, reinforced insulation according to EN 61010))
		300 V (Rated insulation voltage (in each case between the digital inputs and digital outputs, reinforced insulation according to EN 61010))
		300 V (Rated insulation voltage (in each case between the digital inputs and outputs // analog inputs and outputs, reinforced insulation in accordance with EN/IEC 61010))
Test voltage for digital I/Os	2.5 kV AC (60 Hz, 2 s)
Test voltage for analog I/Os	1.5 kV AC (60 Hz, 2 s)
Transient surge protection	yes
Supply
Supply voltage	24 V DC
Supply voltage range	10.8 V DC ... 30.5 V DC
Supply voltage range		100 V AC ... 240 V AC
Typical current consumption	110 mA (120 V AC)
Max. current consumption	368 mA (10.8 V DC)
		135 mA (30.5 V DC)
		116 mA (100 V AC)
		60 mA (240 V AC)
Power consumption	7.4 W (peak; 30 dBm)

Input data

Digital
Max. current consumption	< 1 mA
Analog
Description of the input	Analog input
Number of inputs	1
Current input signal	0 mA ... 20 mA (can be set via DIP switches)
Current input signal		4 mA ... 20 mA (can be set via DIP switches)
Max. current input signal	22 mA
Input resistance current input	< 70 Ω
Resolution	16 bit
Precision	≤ 0.02 % (at 25 °C)
Protective circuit	Short-circuit and overload protection
Temperature coefficient, typical	typ. 0.0025 %/K (at -40 °C ... +70 °C)
Supply voltage	≥ 12 V DC (For passive sensors (via terminal PWR1, +I1))
Digital
Description of the input	Digital input
Number of inputs	2
Min. voltage input signal	0 V AC/DC
Max. voltage input signal	250 V AC/DC
Switching level "0" signal	0 V AC/DC ... 4 V AC/DC (Low-voltage input)
Switching level "0" signal		0 V AC/DC ... 20 V AC/DC (High-voltage input)
Switching level "1" signal	10 V AC/DC ... 50 V AC/DC (Low-voltage input)
Switching level "1" signal		50 V AC/DC ... 250 V AC/DC (High-voltage input)
Input frequency	≤ 2 Hz

Output data

Digital
Output name	Relay output
Number of outputs	2
Contact switching type	Changeover contact
Contact material	AgSnO₂
Maximum switching voltage	250 V AC
Maximum switching voltage		24 V DC
Min. switching current	≥ 10 mA
Max. switching current	2 A
Mechanical service life	1x 10⁷cycles
Electrical service life	2x 10⁵ cycles (At 2 A, 250 V AC, cosφ 0.4)
Electrical service life		2x 10⁵ cycles (At 1 A, 24 V DC, L/R = 48 ms)
Maximum switching frequency	2 Hz
Switching capacity	48 W (24 V DC)
		60 W (30 V DC)
		20 W (48 V DC)
		18 W (60 V DC)
		22 W (110 V DC)
		40 W (220 V DC)
		42 W (250 V DC)
Behavior of the outputs (adjustable via DIP switch)	Hold / Reset
Analog
Output name	Analog output
Number of outputs	1
Voltage output signal	0 V ... 10 V
Max. voltage output signal	approx. 10.83 V
Current output signal	0 mA ... 20 mA
Current output signal		4 mA ... 20 mA
Max. current output signal	approx. 21.67 mA
Load	≥ 10 kΩ
Load		≤ 500 Ω
Resolution	16 bit
Protective circuit	Transient protection of outputs
Digital
Output name	RF link relay output
Number of outputs	1
Contact switching type	Changeover contact
Contact material	PdRu, gold-plated
Maximum switching voltage	30 V AC/DC
Max. switching current	500 mA
Electrical service life	5x 10⁵ switching cycles with 0.5 A at 30 V DC
Analog
Output name	RSSI voltage output
Number of outputs	1
Voltage output signal	0 V ... 3 V

Connection data

Connection method	Screw connection
Stripping length	11 mm
Conductor cross-section, rigid min.	0.14 mm²
Conductor cross-section, rigid max.	2.5 mm²
Conductor cross-section flexible min.	0.14 mm²
Conductor cross-section flexible max.	2.5 mm²
Conductor cross-section AWG min.	26
Conductor cross-section AWG max.	14

Interfaces

Wireless
Range	± 32 km (The range may be considerably above or below that stated, and depends on the environment, antenna technology, and the product used)
Wireless
Interface description	Trusted Wireless
Direction	Bi-directional
Frequency	900 MHz
Frequency range	902 MHz ... 928 MHz
Transmission power	max. 1 W (adjustable)
Data rate	16 kbps (adjustable)
		125 kbps (adjustable)
		250 kbps (adjustable)
		500 kbps (adjustable)
Minimum receiver sensitivity	-112 dBm (16 kbps)
		-105 dBm (125 kbps)
		-102 dBm (250 kbps)
		-95 dBm (500 kbps)
Antenna connection method	N (female)
Security	128-bit data encryption
Functions
Country support	USA (FCC, Part 15.247, ID: SGV-SHR-900)
Country support		Canada (IC, RSS210, ID: 4720C-SHR900)
Wireless
Frequency range	902 MHz ... 928 MHz
Frequency band	900 MHz
Wireless standard	Trusted Wireless

Signaling

Status display	LED supply voltage, PWR (green)
	Green LED (bus communication, DAT)
	LED periphery error, ERR (red)
	3x green, 1x yellow LED (LED bar graph receive quality, RSSI)
	Yellow LED (digital input, DI1)
	Yellow LED (digtial input, DI2)
	Yellow LED (digtial output, DO1)
	Yellow LED (digtial output, DO2)

Dimensions

Width	220 mm
Height	90 mm
Depth	120 mm

Material specifications

Color	black
Flammability rating according to UL 94	V0
Housing material	Glass-reinforced plastic (GRP)

Environmental and real-life conditions

Ambient conditions
Degree of protection	NEMA 4
Ambient temperature (operation)	-40 °C ... 70 °C (DC)
	-40 °C ... 65 °C (AC)
Ambient temperature (storage/transport)	-40 °C ... 85 °C
	-40 °F ... 185 °F
Altitude	2000 m
Permissible humidity (operation)	20 % ... 85 %
Permissible humidity (storage/transport)	20 % ... 85 %
Shock	in accordance with DIN EN 60068-2-27: 30g, 18 ms
Vibration (operation)	in accordance with IEC 60068-2-6: 5g, 10 Hz ... 150 Hz

Approvals

Conformity/Approvals
Conformance	FCC Directive, Part 15.247
	ISC Directive RSS 210
UL, USA / Canada	ANSI/ISA/CSA 22.2 61010-2-201, UL 50E Type 4
	Class I, Div. 2, Groups A, B, C, D T4 Class I, Zone 2, IIC T4

EMC data

Electromagnetic compatibility	Conformance with EMC Directive 2004/108/EC

Mounting

Item number	2702877
Packing unit	1 pc
Minimum order quantity	1 pc
Sales key	31NDNC
Product key	DNC611
GTIN	4055626428888
Weight per piece (including packing)	2,075.3 g
Weight per piece (excluding packing)	2,075.3 g
Customs tariff number	85176200
Country of origin	US

ECLASS-13.0	19179090
ECLASS-15.0	19179090

EU RoHS
Fulfills EU RoHS substance requirements	Yes
Exemption	6(c), 7(a), 7(c)-I
EU REACH SVHC
REACH candidate substance (CAS No.)	Lead (CAS: 7439-92-1)

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

RAD-900-DAIO6 - Wireless module

2702877

Product details

ECLASS

ETIM

UNSPSC

UL Listed

cUL Listed

cUL Listed

UL Listed

Compatible products

Your advantages

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

RAD-900-DAIO6 - Wireless module 2702877

Product details

ECLASS

ETIM

UNSPSC

Compatible products

CN-UB-70DC-6-SB - Surge protection device 2803153

CN-LAMBDA/4-2.25-SB - Surge protection device 2801056

RAD-900-CONF-RF1 - Configuration memory 2702122

RAD-CABLE-USB - Cable for programming 2903447

RAD-CAB-PFP240-10 - Antenna cable 5606124

RAD-CAB-PFP400-20 - Antenna cable 5606125

RAD-CAB-PFP600-25 - Antenna cable 5606126

RAD-ISM-900-ANT-YAGI-3-N - Antenna 2867801

RAD-ISM-900-ANT-OMNI-FG-3-N - Antenna 2867791

RAD-ISM-900-ANT-YAGI-6.5-N - Antenna 2867814

Your advantages

Frequently searched

RAD-900-DAIO6 - Wireless module

2702877