PI-EX-ID-I/I
-
Signal isolator
2835024
Ex i Analog Output: output isolating driver. Isolates and drives 0/4-20mA signals from a controller located in the safe area to a load (I/P converters, control valves, indicators) in the hazardous area. 3-way isolated (input/output/supply).
Product details
Order information: | The electronics module is plugged into a basic terminal block. |
Product type | Signal conditioner |
Application | Analog OUT |
No. of channels | 1 |
Step response (10-90%) | < 250 µs |
Maximum temperature coefficient | < 0.01 %/K |
Maximum transmission error | ≤ 0.1 % (Of end value (at 20°C)) |
Electrical isolation Input/output | |
Electrical isolation | 250 Vrms (acc. to EN 50020) |
Electrical isolation Input/power supply | |
Test voltage | 1.5 kV AC (50 Hz, 60 s) |
Electrical isolation Output/supply | |
Electrical isolation | 250 Vrms (acc. to EN 50020) |
Supply | |
Supply voltage range | 20 V DC ... 35 V DC |
Max. current consumption | 50 mA (at 24 V) |
Power consumption | 1 W (at 24 V) |
Signal | |
Description of the input | Current input |
Current input signal | 4 mA ... 20 mA |
0 mA ... 20 mA |
Signal | |
Output description | intrinsically safe |
Current output signal | 4 mA ... 20 mA |
0 mA ... 20 mA | |
Output voltage | 16 V (at 20 mA) |
Load/output load current output | ≤ 800 Ω |
Output resistor | > 2 MΩ |
Output ripple | < 40 μApp (800 Ω) |
Safety data | |
Max. output voltage Uo | 28 V |
Max. output current Io | 93 mA |
Max. output power Po | 0.65 W |
EEX specification | EX II (1)GD, [EEx ia] IIC, BAS 97 ATEX 1211 |
IIA: Max. external inductivity Lo / Max. external capacitance Co | 36.02 mH / 2.15 µF |
IIB: Max. external inductivity Lo / Max. external capacitance Co | 17.72 mH / 0.65 µF |
IIC: Max. external inductivity Lo / Max. external capacitance Co | 4.3 mH / 0.083 µF |
Status display | Green LED (supply voltage) |
Dimensional drawing |
|
Width | 12.4 mm |
Height | 145 mm |
Depth | 147 mm |
Color | green (RAL 6021) |
Flammability rating according to UL 94 | V0 |
Housing material | PBT and polyamide PA non-reinforced |
Ambient conditions | |
Ambient temperature (operation) | -20 °C ... 60 °C (vertical assembly) |
-20 °C ... 50 °C (horizontal assembly) | |
Ambient temperature (storage/transport) | -40 °C ... 80 °C |
Permissible humidity (operation) | 5 % ... 95 % (relative humidity, non-condensing) |
Electromagnetic compatibility | Conformance with EMC directive |
Noise immunity | EN 61326:1998 |
Noise emission | |
Standards/regulations | EN 61326:1998 |
Item number | 2835024 |
Packing unit | 1 pc |
Minimum order quantity | 1 pc |
Product key | DK1XXX |
Catalog page | Page 328 (IF-2005) |
GTIN | 4017918148010 |
Weight per piece (including packing) | 92.7 g |
Weight per piece (excluding packing) | 86.2 g |
Country of origin | GB |
EU REACH SVHC | |
REACH candidate substance (CAS No.) | No substance above 0.1 wt% |
Compatible products
PHOENIX CONTACT AS
Strømsveien 344; N-1081 Oslo