Innholdet du ser, er skreddersydd for Norge. Se innhold for USA | Velg annet land

PSR-SCP-230AC/ESAM2/3X1/1X2/B - Safety relays

2901430

Safety relay for emergency stop and safety door up to SIL 1, Cat. 1, PL c, depending on the application up to SIL 3, Cat. 4, PL e, single-channel operation, 3 enabling current paths, nominal input voltage of 230 V AC, plug-in screw terminal blocks

Free download available. Downloads

Note on application
Note on application	Only for industrial use

Product type	Safety relays
Product family	PSRclassic
Application	Emergency stop
	Safety door
Control	1-channel
Mechanical service life	approx. 10⁷ cycles
Relay type	Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
Insulation characteristics
Overvoltage category	III
Degree of pollution	2

Maximum power dissipation for nominal condition	2.88 W
Nominal operating mode	100% operating factor
Rated insulation voltage	250 V AC
Rated surge voltage/insulation	4 kV / basic insulation (safe isolation, reinforced insulation, and 6 kV between A1-A2/logic/enabling and signaling current paths)

General
Rated control circuit supply voltage U_S	230 V AC -15 % / +10 %
Rated control supply current I_S	22 mA
Voltage at input/start and feedback circuit	~ 24 V DC
Typical response time	50 ms (manual start)
	300 ms (automatic start)
Typ. starting time with U_s	300 ms (when controlled via A1 or S11/S12)
Typical release time	20 ms (when controlled via S11/S12)
	150 ms (when controlled via A1)
Recovery time	1 s
Maximum switching frequency	0.5 Hz
Protective circuit	Surge protection; Suppressor diode
	Surge protection; Varistor
Max. permissible overall conductor resistance	50 Ω

Contact switching type	3 enabling current paths
	1 signaling current path
Contact material	AgSnO₂, gold-flashed
Maximum switching voltage	250 V AC/DC
Minimum switching voltage	10 V AC/DC
Limiting continuous current	6 A (Enabling current paths)
	5 A (Signaling current path)
Maximum inrush current	6 A
Inrush current, minimum	10 mA
Sq. Total current	72 A² (I_TH² = I₁² + I₂² + I₃²)
Interrupting rating (ohmic load) max.	144 W (at 24 V DC)
	230 W (at 48 V DC)
	68 W (at 110 V DC)
	88 W (at 220 V DC)
	2000 VA (for 250 V AC)
Maximum interrupting rating (inductive load)	48 W (at 24 V DC)
	40 W (at 48 V DC)
	35 W (at 110 V DC)
	33 W (at 220 V DC)
Switching capacity min.	100 mW
Switching capacity (360/h cycles)	6 A (24 V DC)
	5 A (230 V AC)
Switching capacity (3600/h cycles)	3 A (24 V (DC13))
	3 A (230 V (AC 15))
Output fuse	10 A gL/gG NEOZED (Enabling current paths)
	6 A gL/gG NEOZED (Signaling current paths)

Connection technology
pluggable	yes
Conductor connection
Connection method	Screw connection
Conductor cross section rigid	0.2 mm² ... 2.5 mm²
Conductor cross section flexible	0.2 mm² ... 2.5 mm²
Conductor cross-section AWG	24 ... 12
Stripping length	7 mm
Screw thread	M3

Status display	2 x LED (green)
Operating voltage display	1 x LED (green)

Width	22.5 mm
Height	99 mm
Depth	114.5 mm

Housing material	PA

Safety data
Stop category	0
Safety data: EN ISO 13849
Category	1 (up to Cat. 4 depending on the application)
Performance level (PL)	c (up to PL e depending on the application)
Safety data
Safety Integrity Level (SIL)	1 (up to SIL 3 depending on the application)
Safety data
Safety Integrity Level (SIL)	1 (up to SIL 3 depending on the application)
Safety data
Safety Integrity Level (SIL)	1 (up to SIL 3 depending on the application)

Ambient conditions
Degree of protection	IP20
Min. degree of protection of inst. location	IP54
Ambient temperature (operation)	-25 °C ... 55 °C
Ambient temperature (storage/transport)	-40 °C ... 85 °C
Maximum altitude	≤ 2000 m (Above sea level)
Max. permissible humidity (storage/transport)	75 % (on average, 85% infrequently, non-condensing)
Max. permissible relative humidity (operation)	75 % (on average, 85% infrequently, non-condensing)
Shock	15g
Vibration (operation)	10 Hz ... 150 Hz, 2g

Conformity/Approvals
Conformance	CE-compliant

Mounting type	DIN rail mounting
Mounting position	any

Item number	2901430
Packing unit	1 pc
Minimum order quantity	1 pc
Sales key	31BDNA
Product key	DNA111
GTIN	4046356592185
Weight per piece (including packing)	239 g
Weight per piece (excluding packing)	165.8 g
Customs tariff number	85371098
Country of origin	DE

Compatible products

Accessories

Your advantages

Up to Cat. 1/PL c in accordance with ISO 13849-1, SIL 1 in accordance with EN IEC 62061, SIL 1 in accordance with IEC 61508

Depending on the application, up to Cat. 4/PL e in accordance with ISO 13849-1, SIL 3 in accordance with EN IEC 62061, SIL 3 in accordance with IEC 61508

1-channel control

Basic insulation

ECLASS-13.0	27371819
ECLASS-15.0	27371819

EU RoHS
Fulfills EU RoHS substance requirements	Yes
Exemption	7(a), 7(c)-I
China RoHS
Environment friendly use period (EFUP)	EFUP-50 An article-related China RoHS declaration table can be found in the download area for the respective article under "Manufacturer declaration". For all articles with EFUP-E, no China RoHS declaration table issued and required.
EU REACH SVHC
REACH candidate substance (CAS No.)	Lead (CAS: 7439-92-1)
SCIP	cbf8e95b-357e-4ac2-94f3-67f3e3279f4e

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

PSR-SCP-230AC/ESAM2/3X1/1X2/B - Safety relays

2901430

Product details

ECLASS

ETIM

UNSPSC

Functional Safety

cULus Listed

Compatible products

Your advantages

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

PSR-SCP-230AC/ESAM2/3X1/1X2/B - Safety relays 2901430

Product details

ECLASS

ETIM

UNSPSC

Compatible products

CRIMPFOX 6 - Crimping pliers 1212034

Your advantages

PSR-SCP-230AC/ESAM2/3X1/1X2/B - Safety relays

2901430