UTI 6-PE/L/LT - Installation protective conductor terminal block

3076043

Product details

Product type	Installation terminal block
Number of connections	4
Number of rows	3
Potentials	2
Insulation characteristics
Overvoltage category	III
Degree of pollution	3

Rated surge voltage	6 kV
Maximum power dissipation for nominal condition	1.31 W

Number of connections per level	2
Nominal cross section	6 mm²
1 level
Connection method	Screw connection
Screw thread	M3
Note	Please observe the current carrying capacity of the DIN rails.
Tightening torque	0.5 ... 0.6 Nm
Stripping length	9 mm
Internal cylindrical gage	A5
Conductor cross-section rigid	0.2 mm² ... 10 mm²
Cross section AWG	24 ... 8 (converted acc. to IEC)
Conductor cross-section flexible	0.2 mm² ... 10 mm²
Conductor cross-section, flexible [AWG]	24 ... 8 (converted acc. to IEC)
Conductor cross-section flexible (ferrule without plastic sleeve)	0.25 mm² ... 6 mm²
Flexible conductor cross-section (ferrule with plastic sleeve)	0.25 mm² ... 4 mm²
2 conductors with same cross section, solid	0.2 mm² ... 2.5 mm²
2 conductors with same cross section, flexible	0.2 mm² ... 2.5 mm²
2 conductors with same cross section, flexible, with ferrule without plastic sleeve	0.25 mm² ... 1.5 mm²
Nominal current	38 A (with 6 mm² conductor cross-section)
Maximum load current	47 A (with 10 mm² conductor cross-section)
Nominal voltage	400 V (phase conductor/phase conductor)
	250 V (phase conductor/PE)
Nominal cross section	6 mm²

Width	8.2 mm
End cover width	2.2 mm
Height	95 mm
Depth on NS 35/7,5	51.5 mm
Depth on NS 35/15	59 mm

Color	gray (RAL 7042)
Flammability rating according to UL 94	V0
Insulating material group	I
Insulating material	PA
Static insulating material application in cold	-60 °C
Relative insulation material temperature index (Elec., UL 746 B)	130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22	HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R23	HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24	HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26	HL 1 - HL 3
Surface flammability NFPA 130 (ASTM E 162)	passed
Specific optical density of smoke NFPA 130 (ASTM E 662)	passed
Smoke gas toxicity NFPA 130 (SMP 800C)	passed

Surge voltage test
Test voltage setpoint	4.8 kV
Result	Test passed
Temperature-rise test
Requirement temperature-rise test	Increase in temperature ≤ 45 K
Result	Test passed
Short-time withstand current 6 mm²	0.72 kA
Short-time withstand current 10 mm²	1.2 kA
Result	Test passed
Power-frequency withstand voltage
Test voltage setpoint	1.5 kV
Result	Test passed

Mechanical data
Open side panel	Yes

Mechanical strength
Result	Test passed
Attachment on the carrier
DIN rail/fixing support	NS 35
Test force setpoint	5 N
Result	Test passed
Test for conductor damage and slackening
Rotation speed	10 rpm
Revolutions	135
Conductor cross-section/weight	0.2 mm² / 0.2 kg
	6 mm² / 1.4 kg
	10 mm² / 2 kg
Result	Test passed

Aging
Temperature cycles	192
Result	Test passed
Needle-flame test
Time of exposure	30 s
Result	Test passed
Oscillation/broadband noise
Specification	DIN EN 50155 (VDE 0115-200):2008-03
Spectrum	Long life test category 2, bogie-mounted
Frequency	f₁ = 5 Hz to f₂ = 250 Hz
ASD level	6.12 (m/s²)²/Hz
Acceleration	3.12g
Test duration per axis	5 h
Test directions	X-, Y- and Z-axis
Result	Test passed
Shocks
Specification	DIN EN 50155 (VDE 0115-200):2008-03
Pulse shape	Half-sine
Acceleration	30g
Shock duration	18 ms
Number of shocks per direction	3
Test directions	X-, Y- and Z-axis (pos. and neg.)
Result	Test passed
Ambient conditions
Ambient temperature (operation)	-60 °C ... 110 °C (Operating temperature range incl. self-heating; for max. short-term operating temperature, see RTI Elec.)
Ambient temperature (storage/transport)	-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (assembly)	-5 °C ... 70 °C
Permissible humidity (operation)	20 % ... 90 %
Permissible humidity (storage/transport)	30 % ... 70 %

Mounting type	NS 35/7,5
	NS 35/15

Commercial data

Item number	3076043
Packing unit	50 pc
Minimum order quantity	50 pc
Sales key	31BB11
Product key	BE1153
GTIN	4046356817653
Weight per piece (including packing)	36.4 g
Weight per piece (excluding packing)	36.4 g
Customs tariff number	85369010
Country of origin	PL

Classifications

Approvals

Approval Specification Data
	Nominal voltage U_N	Nominal current I_N	Cross section AWG
B
	300 V	20 A	24 - 8
PE connection			24 - 8
D
	300 V	10 A	24 - 8
PE connection			24 - 8

Environmental product compliance

Compatible products

Accessories

Your advantages

The installation terminal block features a particularly low-profile design and is suitable for wiring in flat installation distributors

ECLASS-13.0	27250110
ECLASS-15.0	27250110

EU RoHS
Fulfills EU RoHS substance requirements	Yes (No exemptions)
China RoHS
Environment friendly use period (EFUP)	EFUP-E No hazardous substances above the limits
EU REACH SVHC
REACH candidate substance (CAS No.)	No substance above 0.1 wt%

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

UTI 6-PE/L/LT - Installation protective conductor terminal block

3076043

Product details

ECLASS

ETIM

UNSPSC

CSA

cULus Recognized

CSA

Compatible products

Your advantages

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

UTI 6-PE/L/LT - Installation protective conductor terminal block 3076043

Product details

ECLASS

ETIM

UNSPSC

Compatible products

FBSL 2-8 - Plug-in bridge 3030324

FBSL 3-8 - Plug-in bridge 3030325

FBSL 4-8 - Plug-in bridge 3030326

FBSL 5-8 - Plug-in bridge 3030327

FBSL 10-8 - Plug-in bridge 3030328

D-UTI 6/3 - End cover 1025464

ZBF 8:UNBEDRUCKT - Zack Marker strip, flat 0808781

ZBF 8/WH-100:UNBEDRUCKT - Zack Marker strip, flat 0808794

ZBF 8 CUS - Zack Marker strip, flat 0825030

LPS-8/E - Service connector 3270560

LPS-8 - Service connector 3270561

LPO 6/E - Pick-off plug 3270525

LPO 6 - Pick-off plug 3270526

NS 35/ 7,5 PERF 2000MM - DIN rail perforated 0801733

NS 35/ 7,5 UNPERF 2000MM - DIN rail, unperforated 0801681

NS 35/ 7,5 WH PERF 2000MM - DIN rail perforated 1204119

NS 35/ 7,5 WH UNPERF 2000MM-VPE 10 - DIN rail, unperforated 1204122

NS 35/ 7,5 AL UNPERF 2000MM - DIN rail, unperforated 0801704

NS 35/ 7,5 ZN PERF 2000MM - DIN rail perforated 1206421

NS 35/ 7,5 ZN UNPERF 2000MM - DIN rail, unperforated 1206434

NS 35/ 7,5 CU UNPERF 2000MM-VPE 10 - DIN rail, unperforated 0801762

NS 35/ 7,5 CAP - End cap 1206560

NS 35/15 PERF 2000MM - DIN rail perforated 1201730

NS 35/15 UNPERF 2000MM - DIN rail, unperforated 1201714

NS 35/15 WH PERF 2000MM - DIN rail perforated 0806602

NS 35/15 WH UNPERF 2000MM-VPE 10 - DIN rail, unperforated 1204135

NS 35/15 AL UNPERF 2000MM - DIN rail, unperforated 1201756

NS 35/15 ZN PERF 2000MM - DIN rail perforated 1206599

NS 35/15 ZN UNPERF 2000MM - DIN rail, unperforated 1206586

NS 35/15 CU UNPERF 2000MM-VPE 10 - DIN rail, unperforated 1201895

NS 35/15 CAP - End cap 1206573

NS 35/15-2,3 UNPERF 2000MM-VPE 10 - DIN rail, unperforated 1201798

ZB 8:UNBEDRUCKT - Zack marker strip 1052002

ZB 8 CUS - Zack marker strip 0825011

UC-TM 8 - Marker for terminal blocks 0818072

UC-TM 8 CUS - Marker for terminal blocks 0824597

UCT-TM 8 - Marker for terminal blocks 0828740

UCT-TM 8 CUS - Marker for terminal blocks 0829616

ZB 8,LGS:L1-N,PE - Marker for terminal blocks 1052413

PAI-4-N GY - Test adapter 3032871

PAI-4-FIX BU - Test adapter 3032729

PAI-4-FIX OG - Test adapter 3034455

PAI-4-FIX YE - Test adapter 3032745

PAI-4-FIX RD - Test adapter 3032732

PAI-4-FIX GN - Test adapter 3032758

PAI-4-FIX BK - Test adapter 3032774

PAI-4-FIX GY - Test adapter 3032790

PAI-4-FIX VT - Test adapter 3032761

PAI-4-FIX BN - Test adapter 3032787

PAI-4-FIX WH - Test adapter 3032797

PAIS-4-FIX GY - Test adapter 3032791

PAIS-4-FIX BK - Test adapter 3032792

PAIS-4-FIX RD - Test adapter 3032793

PAIS-4-FIX BU - Test adapter 3032798

PAIS-4-FIX YE - Test adapter 3032799

PAIS-4-FIX GN - Test adapter 3032801

PAIS-4-FIX VT - Test adapter 3032802

PS-8 - Test plug 3031005

DP PS-8 - Spacer plate 3036741

PS-8/2,3MM RD - Test plug 3048564

NLS-CU 3/10 1600MM - Neutral conductor rail 5406430

NLS-CU 3/10 1160MM - Neutral conductor rail 5406429

NLS-CU 3/10 148MM 2X5,5 - Neutral conductor rail 5406390

NLS-CU 3/10 320MM 7X5,5 - Neutral busbar 5406389

NLS-CU 3/10 SN 55MM 2X5,5 - Neutral busbar 5406304

NLS-CU 3/10 SN 300MM 2X5,2 - Neutral busbar 5406221

NLS-CU 3/10 SN 175MM - Neutral busbar 5406194

NLS-CU 3/10 SN 630MM - Neutral busbar 5406185

NLS-CU 3/10 SN 550MM - Neutral busbar 5406184

UTI 6-PE/L/LT - Installation protective conductor terminal block

3076043