PSR-MC82-5NO-1NC-1DO-24DC-SP - Extension module - 2702383

Notes

Note on application
Note on application	Only for industrial use

Product properties

Product type	Safety relays
Product family	PSRmini
Application	Extension module
Control	1 and 2 channel
Relay type	Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
Insulation characteristics
Overvoltage category	III
Degree of pollution	2
Times
Typical response time	< 50 ms (Monitored/manual and auto-start)
Typ. starting time with U_s	< 50 ms (when controlled via A1/A2)
Typical release time	< 25 ms (when controlled via A1/A2)
Recovery time	< 100 ms

Electrical properties

Maximum power dissipation for nominal condition	15.2 W (at U_S = 30 V, I_L² = 64 A²)
Nominal operating mode	100% operating factor
Rated insulation voltage	250 V AC
Supply
Designation	A1/A2
Rated control circuit supply voltage U_S	19.2 V DC ... 30 V DC
Rated control circuit supply voltage U_S	24 V DC -20 % / +25 %
Rated control supply current I_S	typ. 80 mA
Power consumption at U_S	typ. 1.92 W
Inrush current	typ. 125 mA (Δt = 7 ms at U_s)
Filter time	4 ms (at A1 in the event of voltage dips at U_s)
		max. 1 ms (at A1/A2, test pulse width, blanking pulses/dark test)
		5 ms (at A1/A2, test pulse rate, blanking pulses/dark test)
		Where test pulse width < 1 ms: test pulse rate = 5 x test pulse width
		max. 1 ms (at A1/A2, test pulse width, switch-on pulses/light test)
		10 ms (at A1/A2; test pulse rate; switch-on pulses/light test)
		Deactivate the switch-on pulses for safety applications.
Protective circuit	Surge protection; Suppressor diode
Protective circuit		Reverse polarity protection; Universal diode

Output data

Relay: Enabling current paths (23/24 ... 63/64)
Output description	safety-related N/O contacts
Number of outputs	5 (undelayed)
Contact switching type	5 enabling current paths
Contact material	AgSnO₂
Switching voltage	min. 5 V AC/DC
		max. 24 V DC (Enabling current path 23/24)
		max. 250 V AC/DC (all other enabling current paths, observe load curve)
Switching power	min. 50 mW (5 V / 10 mA)
Inrush current	min. 10 mA
Inrush current		max. 20 A (≤ 100 ms)
Switching capacity	3 A (24 V (DC13))
Switching capacity		3 A (250 V (AC15))
Limiting continuous current	6 A (observe derating)
Sq. Total current	64 A² (observe derating)
Switching frequency	max. 0.5 Hz
Mechanical service life	10x 10⁶ cycles
Output fuse	10 A gL/gG
Output fuse		6 A gL/gG (for low-demand applications)
Relay: Confirmation current path (11/12)
Output description	Safety-related N/C contacts
Number of outputs	1 (undelayed)
Contact switching type	1 confirmation current path
Contact material	AgSnO
Switching voltage	min. 5 V AC/DC
Switching voltage		max. 24 V DC
Switching power	min. 50 mW
Inrush current	min. 10 mA
Inrush current		max. 100 mA
Limiting continuous current	100 mA
Switching frequency	max. 0.5 Hz
Mechanical service life	10x 10⁶ cycles
Output fuse	1 A gL/gG
Signal: M1
Output description	non-safety-related
Number of outputs	1 (digital, PNP)
Voltage	typ. 23 V DC (U_S - 1 V)
Current	max. 100 mA
Maximum inrush current	500 mA (Δt = 1 ms at U_s)
Short-circuit protection	Yes

Connection data

Connection technology
pluggable	yes
Conductor connection
Connection method	Push-in connection
Conductor cross-section rigid	0.2 mm² ... 1.5 mm²
Conductor cross-section flexible	0.2 mm² ... 1.5 mm²
Conductor cross-section, flexible, with ferrule, with plastic sleeve	0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
Conductor cross-section flexible, with ferrule without plastic sleeve	0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
Conductor cross-section AWG	24 ... 16
Stripping length	8 mm

Signaling

Status display	2 x LED (green)

Dimensions

Width	17.5 mm
Height	116.6 mm
Depth	114.5 mm

Material specifications

Color (Housing)	yellow (RAL 1018)
Housing material	PA

Characteristics

Safety data
Stop category	0
Safety data: EN ISO 13849
Category	4 (In conjunction with suitable evaluating device)
Performance level (PL)	e (In conjunction with suitable evaluating device)
Safety data: IEC 61508 - High demand
Safety Integrity Level (SIL)	3 (In conjunction with suitable evaluating device)
Safety data: IEC 61508 - Low demand
Safety Integrity Level (SIL)	3 (In conjunction with suitable evaluating device)
Safety data: EN IEC 62061
Safety Integrity Level (SIL)	3 (In conjunction with suitable evaluating device)

Environmental and real-life conditions

Ambient conditions
Degree of protection	IP20
Min. degree of protection of inst. location	IP54
Ambient temperature (operation)	-20 °C ... 60 °C (observe derating)
Ambient temperature (storage/transport)	-40 °C ... 80 °C
Maximum altitude	max. 2000 m (Above sea level)
Max. permissible humidity (storage/transport)	75 % (on average, 85% infrequently, non-condensing)
Max. permissible relative humidity (operation)	75 % (on average, 85% infrequently, non-condensing)
Shock	15g (In the event of stress caused by shock, contact reactions are possible for up to 6 ms.)
Vibration (operation)	10 Hz ... 150 Hz, 2g (In the event of stress caused by vibration, contact reactions are possible for up to 1 ms.)

Approvals

CE
Identification	CE-compliant

Mounting

Mounting type	DIN rail mounting
Assembly note	See derating curve
Mounting position	vertical or horizontal

Item number	2702383
Packing unit	1 pc
Minimum order quantity	1 pc
Sales key	31BDNA
Product key	DNA181
GTIN	4055626145488
Weight per piece (including packing)	210.1 g
Weight per piece (excluding packing)	209.4 g
Customs tariff number	85371098
Country of origin	DE

ECLASS-13.0	27371819
ECLASS-15.0	27371819
ECLASS-15.0 ASSET	27250101

EU RoHS
Fulfills EU RoHS substance requirements	Yes
Exemption	7(a), 7(c)-I
China RoHS
Environment friendly use period (EFUP)	EFUP-50 An article-related China RoHS declaration table can be found in the download area for the respective article under "Manufacturer declaration". For all articles with EFUP-E, no China RoHS declaration table issued and required.
EU REACH SVHC
REACH candidate substance (CAS No.)	Lead (CAS: 7439-92-1)
SCIP	86f7cbf8-6903-49c5-b7cc-68930eb09995

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

PSR-MC82-5NO-1NC-1DO-24DC-SP - Extension module

2702383

Product details

ECLASS

ETIM

UNSPSC

Functional Safety

Functional Safety

cULus Listed

Compatible products

Your advantages

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

PSR-MC82-5NO-1NC-1DO-24DC-SP - Extension module 2702383

Product details

ECLASS

ETIM

UNSPSC

Compatible products

CP-MSTB - Coding profile 1734634

CR-MSTB - Coding section 1734401

CRIMPFOX 6 - Crimping pliers 1212034

Your advantages

PSR-MC82-5NO-1NC-1DO-24DC-SP - Extension module

2702383