Gigabit Ethernet extenders Highspeed Ethernet up to 1 km

With these devices, you use existing 2-wire cables or coaxial cables for high-bandwidth Ethernet communication over long distances.

The Gigabit Ethernet extenders enable broadband Ethernet applications of up to 1 Gbps over distances of up to 1 km. This goes far beyond the standard Ethernet distance of a maximum of 100 m. This means that there are no major restrictions on network extensions when using Ethernet.

Existing 2-wire cables or coaxial cables are sufficient for robust transmission. You can of course use an existing CAT Ethernet cable. However, it is not required.

With the PoL and PoE function, the Gigabit extenders themselves and also the connected PoE end devices are supplied with voltage. Depending on the network structure, multiple Gigabit Ethernet extenders and PoE end devices require just one power supply.

With the PoL and PoE functions, additional power can be transmitted via the data line. This means you need fewer power supplies to power the extenders and the connected PoE end devices in the field. Installation is simpler and faster. Depending on the network structure, multiple Gigabit Ethernet extenders and PoE end devices require just one power supply. This results in a large cost reduction due to fewer devices and less installation work.

With the PoL function, the Gigabit Ethernet extenders supply each other. The extender supplied via PoL can additionally supply a connected PoE camera with PoE af/at (up to 30 watts).

The Gigabit Ethernet extenders are network-compatible with each other. You can thus build point-to-point, line, or star structures. This increases the flexibility of the application.

The Plug-and-Play-capable devices enable easy commissioning of your system without complex configuration. The devices recognize each other automatically. You can connect up to 15 devices in a network. In addition, you can also use the PoL and PoE power supply functions in the network, depending on the cable used and the total length.