EV-GBM3SE12-3AC32A-0,7M6,0E10T - Infrastructure charging socket - 1627558

Notes

General	With temperature measurement via Pt 1000 sensors

Product properties

Product type	Infrastructure charging socket
Product family	CHARX connect
Application	for charging electric vehicles with alternating current (AC)
	compatible with infrastructure charging plugs
Charging standard	GB/T
Charging mode	Mode 3, Case B

Electrical properties

Type of signal transmission	Pulse width modulation
Note on the connection method	Crimp connection, cannot be disconnected
Temperature measurement	4x Pt 1000 (DIN EN 60751)
Type of charging current	AC 3-phase
Charging power	26.6 kW
Charging current	32 A
Power contact
Number	5 (L1, L2, L3, N, PE)
Rated voltage	440 V AC
Rated current	32 A
Signal contact
Number	2 (CP, CC)
Rated voltage	30 V AC
Rated current	2 A
Temperature sensors (Pt 1000)
Sensor type	Pt 1000
Standards/regulations	DIN EN 60751
Attachment point	4 sensors for the AC contacts
Switch-off temperature	90 °C ±1 K (equivalent to a Pt 1000 value of 1346.5 Ω)
Long-term stability	0.06 % (after 1000 hours at 130 °C)
Recommended measured current	1 mA (1 V at 0°C)
Coefficient	3850 ppm/K
Ambient temperature	-50 °C ... 130 °C (Operation)
Locking actuator
Operating voltage	12 V
Note number of positions	4-pos.
Position of the locking actuator	top center
Locking actuator
Operating voltage	12 V
Note number of positions	4-pos.
Position of the locking actuator	top center
Possible power supply range at the motor	9 V ... 16 V
Maximum voltage for locking detection	30 V
Typical motor current for locking	0.2 A
Reverse current of the motor	max. 1 A
Max. dwell time with reverse current	1000 ms
Recommended adaptation time	600 ms
Pause time after entry or exit path	3 s
Service life insertion cycles	> 10000 load cycles
Lock recognition	available
Mechanical emergency release	available
Ambient temperature (operation)	-30 °C ... 50 °C
Cable length	0.5 m
Cable structure	4 x 0.5 mm²

Cable/line

Mechanical properties

Mechanical data
Insertion/withdrawal cycles	> 10000
Insertion force	< 100 N
Withdrawal force	< 100 N

Environmental and real-life conditions

Ambient conditions
Ambient temperature (operation)	-30 °C ... 50 °C
Ambient temperature (storage/transport)	-40 °C ... 80 °C
Altitude	5000 m (above sea level)

Standards and regulations

Standards
Standards/regulations	GB/T 20234.2-2015

Mounting

Mounting type Infrastructure charging socket	Rear panel mounting (0 to 90 degree frontal inclination possible)
Mounting hole diameter	7.00 mm (ø)

Item number	1627558
Packing unit	1 pc
Minimum order quantity	1 pc
Product key	XWBADF
Catalog page	Page 756 (C-2-2017)
GTIN	4055626327884
Weight per piece (including packing)	650 g
Weight per piece (excluding packing)	650 g
Customs tariff number	85443000
Country of origin	CN

China RoHS
Environment friendly use period (EFUP)	EFUP-10 An article-related China RoHS declaration table can be found in the download area for the respective article under "Manufacturer declaration". For all articles with EFUP-E, no China RoHS declaration table issued and required.
EU REACH SVHC
REACH candidate substance (CAS No.)	No substance above 0.1 wt%

EV-GBM3SE12-3AC32A-0,7M6,0E10T - Infrastructure charging socket

1627558