Pin strip - PST 1,3/ 2-5,0 R24 1720301

Pin strip, nominal cross section: 1.5 mm2, color: black, nominal current: 12 A (depends on the plug used), rated voltage (III/2): 320 V, contact surface: Tin, type of contact: Male connector, Number of potentials: 2, Number of rows: 1, Number of positions per row: 2, number of connections: 2, product range: PST 1,3/..-V, pitch: 5 mm, mounting: THR soldering, pin layout: Linear pinning, solder pin [P]: 3.5 mm, Stecksystem: COMBICON COMPACT PST 1,3, Locking: without, type of packaging: 24 mm wide tape, The maximum current depends on the plug used. The lower of the two current values apply for plug and pin strip. The pin strip is made of highly temperature resistant plastic and is thus suitable for the reflow process.

Product Details




Processing notes
Classification temperature Tc 260 °C
Moisture Sensitive Level MSL 1
Solder cycles in the reflow 3

Thermal test | Test group C
Tested number of positions 12
Specification IEC 60512-5-1:2002-02
Electrical properties
Rated surge voltage (III/2) 4 kV
Pollution degree 2
Contact resistance 1.6 mΩ
Rated voltage (III/2) 320 V
Air clearances and creepage distances |
minimum clearance value - non-homogenous field (II/2) 3 mm
minimum creepage distance (III/3) 4 mm
minimum clearance value - non-homogenous field (III/3) 3 mm
Insulating material group IIIa
minimum clearance value - non-homogenous field (III/2) 3 mm
minimum creepage distance (III/2) 3.2 mm
Comparative tracking index (IEC 60112:2003-01) CTI 250
minimum creepage distance (II/2) 4 mm
Rated surge voltage (II/2) 4 kV
Rated insulation voltage (III/3) 250 V
Rated insulation voltage (III/2) 320 V
Specification IEC 60664-1:2007-04
Rated insulation voltage (II/2) 400 V
Rated surge voltage (III/3) 4 kV
Rated surge voltage (III/2) 4 kV
Temperature cycles
Specification IEC 60999-1:1999-11
Result Test passed

Rated surge voltage (III/3) 4 kV
Rated surge voltage (III/2) 4 kV
Rated voltage (II/2) 400 V
Nominal current IN 12 A (depends on the plug used)
12 A (depends on the plug used)
Maximum load current 12 A (depends on the plug used)
Rated surge voltage (II/2) 4 kV
Contact resistance 1.7 mΩ
1.4 mΩ
2.1 mΩ
Insulation resistance > 0.5 TΩ, (IEC 60512-3-1:2002-02)
> 10 TΩ, (IEC 60512-3-1:2002-02)
> 5 TΩ, (IEC 60512-3-1:2002-02)
Nominal voltage UN 250 V
Rated voltage (III/2) 320 V

[W2] coil overall dimension 30.4 mm
[W] tape width 24 mm
Outer packaging type Transparent-Bag
[A] coil diameter 330 mm
Specification DIN EN 61340-5-1 (VDE 0300-5-1): 2008-07
Type of packaging 24 mm wide tape
ESD level (D) electrostatically conductive

Dimensional drawing
Hole diameter 1.3 mm
Installed height 9.5 mm
Pin dimensions ø 1.3 mm
Length 2.8 mm
Length of the solder pin 3.5 mm
3.5 mm
Pitch 5 mm
Height 13 mm
Width 9.6 mm

Durability test
Contact resistance R2 1.7 mΩ
Contact resistance R1 1.6 mΩ
Impulse withstand voltage at sea level 4.8 kV
Specification IEC 60512-9-1:2010-03
Insulation resistance, neighboring positions > 0.3 TΩ
Insertion/withdrawal cycles 25
Climatic test
Thermal stress 100 °C/168 h
Corrosive stress 0.2 dm3 SO2 on 300 dm3/40 °C/1 cycle
Power-frequency withstand voltage 2.21 kV
Specification ISO 6988:1985-02
Vibration test
Amplitude 0.35 mm (10 - 60.1 Hz)
Test duration per axis 2.5 h
Frequency 10 - 150 - 10 Hz
Specification IEC 60068-2-6:2007-12
Sweep speed 1 octave/min
5 g (60.1 - 150 Hz)

Ambient temperature (operation) -40 °C ... 100 °C (dependent on the derating curve)
Ambient temperature (assembly) -5 °C ... 100 °C
Ambient temperature (storage/transport) -40 °C ... 70 °C

Contact holder in insert
Test force per pos. 20 N
Specification IEC 60512-15-1:2008-05
Result Test passed
Repeated connection and disconnection
Specification IEC 60999-1:1999-11
Result Test passed
Insertion and withdrawal forces
No. of cycles 25
Withdraw strength per pos. approx. 5 N
Insertion strength per pos. approx. 5 N
Result Test passed
Test for conductor damage and slackening
Specification IEC 60999-1:1999-11
Result Test passed
Pull-out test
Conductor cross section/conductor type/tractive force setpoint/actual value 0.2 mm2 / solid / > 10 N
0.2 mm2 / flexible / > 10 N
2.5 mm2 / solid / > 50 N
2.5 mm2 / flexible / > 50 N
Specification IEC 60999-1:1999-11
Visual inspection
Specification IEC 60512-1-1:2002-02
Result Test passed
Resistance of inscriptions
Specification IEC 60068-2-70:1995-12
Result Test passed
Dimension check
Specification IEC 60512-1-2:2002-02
Result Test passed

Note on application Pick and place pads may protrude beyond the components. The PCB layout must ensure that collisions are avoided when components are assembled.
Environmental Product Compliance
China RoHS Environmentally friendly use period: unlimited = EFUP-e
No hazardous substances above threshold values

Material data - housing
Insulating material group IIIa
Temperature for the ball pressure test according to EN 60695-10-2 125 °C
Glow wire flammability index GWFI according to EN 60695-2-12 850
CTI according to IEC 60112 250
Housing color black (9005)
Insulating material PA
Flammability rating according to UL 94 V0
Glow wire ignition temperature GWIT according to EN 60695-2-13 775
Material data - contact
Contact material Cu alloy
Metal surface soldering area (middle layer) Nickel (1 - 3 µm Ni)
Surface characteristics Tin-plated
Note WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201
Metal surface contact area (top layer) Tin (3 - 5 µm Sn)
Metal surface contact area (middle layer) Nickel (1 - 3 µm Ni),
Metal surface soldering area (top layer) Tin (3 - 5 µm Sn)

Plug-in system COMBICON COMPACT PST 1,3
Number of positions 2
Type Pin strip
Number of potentials 2
Number of levels 1
Number of connections 2
Pin layout Linear pinning
Mounting flange without


Order Key 1720301
Packing unit 330 pc
Minimum order quantity 330 pc
Catalog Page Page 435 (C-1-2013)
GTIN 4046356115919
Weight per Piece (including packing) 1.7 GRM
Weight per Piece (excluding packing) 1.7 GRM
Customs tariff number 85366930
Country of origin DE


SEV

Approval Specification Data
Nominal voltage UN 250 V
Nominal current IN 12 A

EAC

cULus Recognized

Approval Specification Data
Usegroup B D
Nominal voltage UN 300 V 300 V
Nominal current IN 16 A 10 A

IECEE CB Scheme

Approval Specification Data
Nominal voltage UN 250 V
Nominal current IN 12 A

Your advantages

Suitable for wave and reflow soldering processes
Optimum pin geometry for all COMBICON pin strip connectors
Supplied in tape-on-reel packing according to IEC 60286-3 for automated mounting