Installation connectors and installation cables

IPD panel feed-throughs with Push-in connection allow tool-free assembly with the direct connection of pretreated and rigid conductors. The push button can be used to release already-installed conductors or to connect conductors without ferrules.

The fast-locking system guarantees easy and reliable mounting, even in particularly difficult installation situations, and the easy replacement of devices if service is required. The plugs latch clearly into place and provide reliable protection against incorrect connection.

With the IPD panel feed-throughs, you feed the cable on the field side through the sleeve and connect it directly to the device. Then simply snap the sleeve into place, establish strain relief via the nut, and the cable is connected.

With the Push-in connection on the device side, wiring robots can automatically connect the components in the device. The IPD panel feed-throughs are therefore ideal for lighting applications.

Cabling with long-term stability in outdoor and industrial environments: With IP67, your installation is protected against splash water and dust for particularly reliable installations in harsh environments.

Insert the wires into the QUICKON nut and snap into the marked wire guides (1, 2, 3, ...).

Cut the litz wire ends off flush.

Place the union nut on the contact carrier and tighten it until the stop, or use the specified torque for tightening.

You will feel the connection snap into place when the optimum tightening point is reached. The QUICKON nut is now screwed on so tight that it cannot be unscrewed again by hand.

The cable can be connected quickly and easily without using any special tools.

Flexibility that pays off: The manual and tool-releasable locking system provides you with even greater freedom during installation and maintenance. The connector can be unlocked easily via a manual release lever or a bladed screwdriver.

The PRC is made for extremes. No matter whether for indoor or outdoor use, whether it is hot or cold, dry or wet: With high degrees of protection up to IP69, PRC ensures reliable power distribution even under demanding environmental conditions. An impact resistance up to IK08 makes PRC a robust solution, even when subjected to vibrations or impacts.

The choice is yours: Using the proven screw connection technology you can assemble your cables on site and without the need for special tools. Here you benefit from pre-installed conductor protection so that you are also able to safely connect untreated conductors. Crimp connection technology enables a fast, automated connection wherever you have to assemble cables in large volumes. Choose the solution that best suits your application.

Clever features such as mechanical coding support you for a quick and error-free commissioning. PRC 20 separates versions with different numbers of positions as well as different versions of one number of positions safely and mechanically. The integrated color coding of the different signal types facilitates clear identification on the construction site.