DEK-OE-230AC/ 48DC/100 - Solid-state relay terminal block

2940210

Input solid-state relay terminal block, input: 230 V AC, output: 3 - 48 V DC/100 mA, terminal block width: 6.2 mm

Order information:	The housing is open on one side. The appropriate cover is D-DEK 1,5 GN (2716949).
Note on application	Use of EB 80-DIK... bridges in the DEK terminal blocks: Absorption of humidity from the ambient air as well as an unfavorable tolerance between a larger number of DEK terminal blocks and the EB 80-DIK... bridge may cause (minor) expansion of the DEK housing. When the EB 80-DIK... bridges are used, therefore, it is recommended that these be disconnected after about 10 to 12 DEK terminal blocks and a wire bridge to the next DEK terminal block be inserted in their place.

Product type	Solid-state relay module
Product family	DEK
Application	Output function
Operating mode	100% operating factor
Insulation characteristics: Standards/regulations
Insulation	Basic insulation
Overvoltage category	III
Pollution degree	2
Data management status
Date of last data management	15.09.2025

Test voltage (Input/output)	2.5 kV AC (Input/output)

Nominal input voltage U_N	230 V AC
Input voltage range in reference to U_N	0.9 ... 1.1
Input voltage range	207 V AC ... 253 V AC
Switching threshold "0" signal, voltage	≤ 92 V
Switching threshold "0" signal in reference to U_N	≤ 0.4
Switching threshold "1" signal voltage	≥ 207 V
Switching threshold "1" signal in reference to U_N	≥ 0.9
Typical input current at U_N	2.5 mA
Typical response time	10 ms
Typical turn-off time	20 ms
Operating voltage display	Yellow LED
Protective circuit	Reverse polarity protection
	Surge protection
Transmission frequency	3 Hz

Contact switching type	1 N/O contact
Design of digital output	electronic
Output voltage range	3 V DC ... 48 V DC
Limiting continuous current	100 mA
Voltage drop at max. limiting continuous current	≤ 0.9 V
Output circuit	2-conductor floating, 3-conductor ground-referenced
Protective circuit	Reverse polarity protection; Polarity protection diode
	Freewheeling diode; Freewheeling diode
Output resistor	approx. 22 kΩ (for 3-conductor operation)

Connection method	Screw connection
Stripping length	8 mm
Screw thread	M3
Conductor cross-section rigid	0.2 mm² ... 2.5 mm²
Conductor cross-section flexible	0.2 mm² ... 2.5 mm²
Conductor cross-section AWG	24 ... 14
Tightening torque	0.4 Nm ... 0.5 Nm

Width	6.2 mm
Height	80 mm
Depth	56 mm

Color	green (RAL 6021)

Ambient conditions
Ambient temperature (operation)	-20 °C ... 60 °C
Ambient temperature (storage/transport)	-20 °C ... 70 °C

Standards/regulations
Standards/regulations	IEC 60947-5-1

Mounting type	DIN rail mounting
Assembly note	in rows with zero spacing
Mounting position	any

Item number	2940210
Packing unit	10 pc
Minimum order quantity	1 pc
Sales key	DK61A1
Product key	DK61A1
GTIN	4017918079918
Weight per piece (including packing)	21,44 g
Weight per piece (excluding packing)	20,9 g
Customs tariff number	85364900
Country of origin	CN

Compatible products

Accessories

Your advantages

Actuator version available

EB-DIK insertion bridges

Labeling and mounting with user-friendly modular terminal blocks

Wear-free switching of up to 24 V DC/10 A or 240 V AC/800 mA

Integrated output protective circuit

Status indicator

Integrated input circuit

Zero voltage switch at AC output

Electrical isolation between input and output at up to 2.5 kVrms

ECLASS-13.0	27371604
ECLASS-15.0	27371604

EU RoHS
Fulfills EU RoHS substance requirements	Yes
Exemption	7(a), 7(c)-I
China RoHS
Environment friendly use period (EFUP)	EFUP-50 An article-related China RoHS declaration table can be found in the download area for the respective article under "Manufacturer declaration". For all articles with EFUP-E, no China RoHS declaration table issued and required.
EU REACH SVHC
REACH candidate substance (CAS No.)	Lead (CAS: 7439-92-1)
SCIP	92c4bd06-89fa-4d09-81db-28d5fdd8651b

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

DEK-OE-230AC/ 48DC/100 - Solid-state relay terminal block

2940210

Product details

ECLASS

ETIM

UNSPSC

EAC

Compatible products

Your advantages

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

DEK-OE-230AC/ 48DC/100 - Solid-state relay terminal block 2940210

Product details

ECLASS

ETIM

UNSPSC

Compatible products

EB 2- DIK RD - Insertion bridge 2716693

EB 3- DIK RD - Insertion bridge 2716745

EB 4- DIK RD - Insertion bridge 2716758

EB 5- DIK RD - Insertion bridge 2716761

EB 10- DIK RD - Insertion bridge 2716774

EB 80- DIK RD - Insertion bridge 2715953

EB 5- DIK BU - Insertion bridge 2716677

EB 10- DIK BU - Insertion bridge 2716680

EB 80- DIK BU - Insertion bridge 2715940

D-DEK 1,5 GN - Separating plate 2716949

ZB 6:UNBEDRUCKT - Zack marker strip 1051003

ZB 6/WH-100:UNBEDRUCKT - Zack marker strip 5060935

DIKD 1,5 - Initiator/actuator terminal block 2715979

Your advantages

DEK-OE-230AC/ 48DC/100 - Solid-state relay terminal block

2940210