IPD PL CAP W26 WP GY - Protective cap

1088707

Protective cap, IPD, with locking element, IP66, IP68, IP69K, width: 26 mm, color: gray, for IPD P 3P2,5..., IPD W 3P2,5..., IPD H 3P,5..., IPD Y 3P2,5

Product details

Technical data

Notes

General	NOTE: Only qualified electrical personnel may install and start up the IPD components.
General	NOTE: Risk of fatal electric shock Never insert or remove the protective cap when the connector is under load or connected to power.
General	For electrical values, refer to the current-carrying product.

Product properties

Product type	Protective cap
Product family	IPD
Retaining cord present	no
Insulation characteristics
Degree of pollution	3

Dimensions

Width	26 mm

Material specifications

Color	light gray (RAL 7035)
Material Protective cap	PA
Material Seal	NBR
Flammability rating according to UL 94	V0

Cable/line

Halogen-free	yes

Mechanical properties

Mechanical data
Insertion/withdrawal cycles	50

Environmental and real-life conditions

Ambient conditions
Degree of protection	IP66
	IP68 (2 m / 24 h)
	IP69K
Ambient temperature (operation)	-30 °C ... 100 °C
Resistance to UV radiation	yes

Mounting

Mounting type	• Position the protective cap centrally in front of the counterpart. The Phoenix Contact logo must be at the top on both mating elements. Make sure that the coding pin is located outside the pin connector pattern.• The connection is coded and only snaps into place in one position. The rotary element automatically locks the connection and reaches its starting position again. • The STS KN6031 2,2x6 thermoplastic screw (or similar items) can be used in the bore hole provided (torque: 0.2 Nm) to secure the protective cap to an IPD panel feed-through.
Assembly note	• Position the protective cap centrally in front of the counterpart. The Phoenix Contact logo must be at the top on both mating elements. Make sure that the coding pin is located outside the pin connector pattern. • The connection is coded and only snaps into place in one position. The rotary element automatically locks the connection and reaches its starting position again.
	• Make sure that the inside of the protective cap is clean and dry before fitting it. • The self-locking rotary elements of the IPD PL CAP... protective cap and the IPD PL... connector are provided with a coding pin. Make sure not to damage the coding pin.

Commercial data

Item number	1088707
Packing unit	1 pc
Minimum order quantity	1 pc
Sales key	AF6ZBX
Product key	AF6ZBX
GTIN	4055626891217
Weight per piece (including packing)	12,2 g
Weight per piece (excluding packing)	11,9 g
Customs tariff number	39269097
Country of origin	DE

Classifications

Approvals

Approval Specification Data
	Nominal voltage U_N	Nominal current I_N	Cross section AWG	Cross section mm²
Only rigid conductors	600 V	20 A	- 14
multi-stranded with ferrule	600 V	20 A	- 14

Environmental product compliance

Your advantages

Easy distribution of power, as components are plugged directly

Simple, time-saving wiring in the field with Push-Lock connection

Reliable installation in harsh environments with IP66, IP68, and IP69K throughout the entire system

Secure, tool-free locking even in particularly difficult installation situations

Fast commissioning with preassembled cable assemblies

EU RoHS
Fulfills EU RoHS substance requirements	Yes (No exemptions)
EU REACH SVHC
REACH candidate substance (CAS No.)	No substance above 0.1 wt%

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

IPD PL CAP W26 WP GY - Protective cap

1088707

Product details

ECLASS

ETIM

VDE Zeichengenehmigung

cULus Listed

Your advantages

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

IPD PL CAP W26 WP GY - Protective cap 1088707

Product details

ECLASS

ETIM

Your advantages

Frequently searched

IPD PL CAP W26 WP GY - Protective cap

1088707