Inline RS-485/422 function terminal, for serial data transmission, 1 serial input and output channel in RS-485/422 design, pure process data communication, transmission speed 2 Mbaud
The serial Inline communication terminal IL RS 485/422-PRO-2MBD-PAC is designed for a transmission speed of 2 Mbps and enables easy and quick integration of scanners, scales and printers in existing production workflows.
Parameter setting and data exchange is performed exclusively with process data. This means faster communication times for small data volume than with the PCP version
A wide range of applications is supported thanks to various protocols and transmission speeds up to 38400 baud.
| Dimensional drawing |
|
| Width | 24.4 mm |
| Height | 136.8 mm |
| Depth | 71.5 mm |
| Color | green |
| Inline local bus | |
| Connection method | Inline data jumper |
| Transmission speed | 2 Mbps |
| RS-485 half duplex or RS-422 full duplex (as alternative only) | |
| Connection method | Spring-cage connection |
| Transmission speed | 110 bps ... 38400 bps (configurable) |
| Transmission physics | Copper |
| Data bits | 7 or 8 |
| Stop bits | 1 or 2 |
| Input buffer | 4 kByte |
| Output buffer | 1 kByte |
| Module | |
| ID code (dec.) | 191 |
| ID code (hex) | BF |
| Length code (hex) | 06 |
| Length code (dec) | 06 |
| Process data channel | 96 bit |
| Input address area | 12 Byte |
| Output address area | 12 Byte |
| Register length | 96 bit |
| Required parameter data | 1 Byte |
| Required configuration data | 5 Byte |
| Product family | Inline |
| Type | modular |
| Number of plugs | 2 |
| Operating mode | Process data mode with 6 words |
| Insulation characteristics | |
| Protection class | III (IEC 61140, EN 61140, VDE 0140-1) |
| Test section | 5 V supply, incoming remote bus/7.5 V supply (bus logics) 500 V AC 50 Hz 1 min |
| 5 V supply, outgoing remote bus/7.5 V supply (bus logics) 500 V AC 50 Hz 1 min | |
| RS-485/422 interface / 7.5 V supply (bus logics) 500 V AC 50 Hz 1 min | |
| RS-485/422 interface / 24 V supply (I/O) 500 V AC 50 Hz 1 min | |
| RS-485/422 interface/functional ground 500 V AC 50 Hz 1 min | |
| 7.5 V supply (bus logics)/24 V supply (I/O) 500 V AC 50 Hz 1 min | |
| 7.5 V supply (bus logic)/functional ground 500 V AC 50 Hz 1 min | |
| 24 V supply (I/O) / functional ground 500 V AC 50 Hz | |
| Supply | |
| I/O voltage | 24 V DC |
| I/O voltage range | 19.2 V DC ... 30 V DC (including ripple) |
| Residual ripple | ± 1.2 V |
| Max. current consumption | 260 mA |
| Typical current consumption | 170 mA |
| Potentials: Communications power (UL) | |
| Supply voltage | 7.5 V DC (via voltage jumper) |
| Current draw | max. 260 mA (all connections of the serial interface are short-circuited) |
| typ. 185 mA | |
| Connection technology | |
| Connection name | Inline connector |
| Conductor connection | |
| Connection method | Spring-cage connection |
| Conductor cross-section rigid | 0.08 mm² ... 1.5 mm² |
| Conductor cross-section flexible | 0.08 mm² ... 1.5 mm² |
| Conductor cross-section AWG | 28 ... 16 |
| Stripping length | 8 mm |
| Inline connector | |
| Connection method | Spring-cage connection |
| Conductor cross-section, rigid | 0.08 mm² ... 1.5 mm² |
| Conductor cross-section, flexible | 0.08 mm² ... 1.5 mm² |
| Conductor cross-section AWG | 28 ... 16 |
| Stripping length | 8 mm |
| Ambient conditions | |
| Degree of protection | IP20 |
| Ambient temperature (operation) | -25 °C ... 55 °C |
| Ambient temperature (storage/transport) | -25 °C ... 85 °C |
| Permissible humidity (operation) | 75 % ... 85 % (in the range of -25°C ... +55°C, appropriate measures against increased humidity (> 85%) must be taken.) |
| Permissible humidity (storage/transport) | 75 % ... 85 % (Slight temporary condensation may sometimes appear on the housing, e.g. when the terminal block is brought out of a vehicle into an enclosed room.) |
| Mounting type | DIN rail mounting |
