The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration.
Order information:
Lock nut is included in the scope of delivery
Product type
Circular connector housing
Thread type
M12
Connection method
THR solder connection
Tightening torque
1.5 ... 2 Nm
Material
Zinc die-cast (nickel-plated)
Material Housing
GD-Zn
Material Housing surface
nickel-plated
Material Screw connection
Brass, nickel-plated
Material Seal
FKM (O-ring on housing)
Seal material
FKM
Connection 1
Head design
Pin
Head thread type
M12
Head locking type
Screw locking mechanism
Mechanical data
Insertion/withdrawal cycles
> 100
Ambient conditions
Degree of protection (when plugged in)
IP67 (correctly plugged in and locked)
Degree of protection
IP67 (correctly plugged in and locked)
IP67, when in locked state
Ambient temperature (operation) (male connector/female connector)
-25 °C ... 85 °C (Plug / socket)
-40 °C ... 85 °C (without mechanical actuation)
UL Type Rating
Type 4 (indoor use only)
Standard designation
M12 circular connector
Standards/specifications
according to IEC 61076-2-101
Mounting type
Rear mounting (M15 x 1)
Assembly note
Spacing between the top edge of the PCB and the back of the front plate: 7 mm
