FL MC 2000T ST - FO converters - 2891316

Notes

Note on application
Note on application	Only for industrial use

Product properties

MTTF	77.82 Years (MIL-HDBK-217F standard, temperature 25°C, operating cycle 100%)
Signal delay	865 ns (Pass-through mode)
	835 ns (Auto converter mode, 100 Mbps, static)

Electrical properties

Electrical isolation	VCC // FE // Ethernet
Test voltage data interface/power supply	1500 V AC (500 V AC, 1 minute)
Supply
Supply voltage range	12 V DC ... 48 V DC
Nominal supply voltage	24 V DC
Typical current consumption	110 mA (24 V DC)

Output data

Switching
Output name	Relay output
Output description	Alarm output
Number of outputs	1
Contact switching type	N/C contact
Maximum switching voltage	24 V DC
Max. switching current	100 mA

Connection data

Supply
Connection method	Plug-in screw terminal block (COMBICON), redundancy possible

Interfaces

Signal	Ethernet
Data: optical FO
Transmit capacity, minimum	-19 dBm
Transmit capacity, maximum	-14 dBm
Transmission length incl. 3 dB system reserve	8 km (fiberglass with F-G 62.5/125 0.7 dB/km F1000)
		3.3 km (fiberglass with F-G 62.5/125 2.6 dB/km F600)
		9.6 km (fiberglass with F-G 50/125 0.7 dB/km F1200)
		5.3 km (fiberglass with F-G 50/125 1.6 dB/km F800)
Connection method	B-FOC (ST®)
Wavelength	1310 nm
Minimum receiver sensitivity	-32 dBm
Maximum receiver sensitivity	-14 dBm
Transmission medium	Multi-mode fiberglass
Transmission medium		GI-HCS fiber
Data: Ethernet interface, 10/100Base-T(X) in accordance with IEEE 802.3
Data rate	10/100 Mbps
Serial transmission speed	10/100 Mbps
Connection method	RJ45 jack, shielded
No. of channels	1
Transmission length	100 m (twisted pair, shielded)
Transmission medium	Copper
Signal LEDs	LNK/ACT, 100
Auto-negotiation modes	Auto
Link through	Link fault pass through
MDI-/MDI-X switchover	Auto-MDI(X)

Dimensions

Width	28 mm
Height	110 mm
Depth	70 mm

Material specifications

Housing material	Aluminum

Mechanical tests

Vibration resistance in accordance with EN 60068-2-6/IEC 60068-2-6	: 5g, 150 Hz, Criterion 3
Shock in accordance with EN 60068-2-27/IEC 60068-2-27	: 30g, 11 ms half-sine shock pulse

Environmental and real-life conditions

Ambient conditions
Degree of protection	IP20
Ambient temperature (operation)	-40 °C ... 75 °C
Ambient temperature (storage/transport)	-40 °C ... 85 °C
Altitude	4850 m
Permissible humidity (operation)	5 % ... 95 % (non-condensing)
Permissible humidity (storage/transport)	5 % ... 95 % (non-condensing)
Shock	300 m/s², 11 ms (IEC 60068-2)
Air pressure (operation)	86 kPa ... 108 kPa
Air pressure (storage/transport)	66 kPa ... 108 kPa

Approvals

Conformity/Approvals
Conformance	CE-compliant
UL, USA / Canada	Class I, Div. 2, Groups A, B, C, D

EMC data

Electromagnetic compatibility	Conformance with EMC Directive 2014/30/EU
Electrostatic discharge
Standards/regulations	EN 61000-4-2
Electrostatic discharge
Comments	Criterion B
Electromagnetic HF field
Standards/regulations	EN 61000-4-3
Electromagnetic HF field
Comments	Criterion A
Fast transients (burst)
Standards/regulations	EN 61000-4-4
Fast transients (burst)
Comments	Criterion A
Surge current load (surge)
Standards/regulations	EN 61000-4-5
Surge current load (surge)
Comments	Criterion B
Conducted interference
Standards/regulations	EN 61000-4-6
Conducted interference
Comments	Criterion A
Emitted interference
Standards/regulations	EN 55032

Mounting

Mounting type	DIN rail mounting
Mounting position	on horizontal DIN rail NS 35 in acc. with EN 60715

Item number	2891316
Packing unit	1 pc
Minimum order quantity	1 pc
Sales key	DNC312
Product key	DNC312
GTIN	4046356869584
Weight per piece (including packing)	310,3 g
Weight per piece (excluding packing)	304,8 g
Customs tariff number	85176200
Country of origin	TW

ECLASS-13.0	19170411
ECLASS-15.0	19170411

EU RoHS
Fulfills EU RoHS substance requirements	Yes
Exemption	6(c), 7(a), 7(c)-I
China RoHS
Environment friendly use period (EFUP)	EFUP-10 An article-related China RoHS declaration table can be found in the download area for the respective article under "Manufacturer declaration". For all articles with EFUP-E, no China RoHS declaration table issued and required.
EU REACH SVHC
REACH candidate substance (CAS No.)	Lead (CAS: 7439-92-1)

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

FL MC 2000T ST - FO converters

2891316

Product details

ECLASS

ETIM

UNSPSC

Compatible products

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

FL MC 2000T ST - FO converters 2891316

Product details

ECLASS

ETIM

UNSPSC

Compatible products

MSTB 2,5/ 8-ST - PCB connector 1754562

DT-LAN-CAT.6+ - Surge protection device 2881007

E/NS 35 N - End bracket 0800886

FL RJ45 PROTECT CAP - Dust protection 2832991

FL CAT5 PATCH 0,5 - Patch cable 2832263

FL CAT5 PATCH 1,0 - Patch cable 2832276

FL CAT5 PATCH 2,0 - Patch cable 2832289

NBC-R4AC-R4AC-IE8A/.../... - Patch cable 1411854

NBC-R4AC/10G-R4AC/10G-94F/2,0 - Patch cable 1408360

NBC-R4AC/10G-R4AC/10G-94F/3,0 - Patch cable 1408365

NBC-R4AC/1,0-93B/R4AC - Patch cable 1408968

NBC-R4AC/2,0-93B/R4AC - Patch cable 1408969

NBC-R4AC/5,0-93B/R4AC - Patch cable 1408970

FOC-ST:PA-SC:PA-OM2:D01/1 - FO patch cable 1115574

FOC-ST:PA-SC:PA-OM2:D01/2 - FO patch cable 1115573

FOC-ST:PA-ST:PA-OM2:D01/1 - FO patch cable 1115560

FOC-ST:PA-ST:PA-OM2:D01/2 - FO patch cable 1115557

FOC-LC:PA-ST:PA-OM2:D01/1 - Fiber optic cable 1115588

FOC-LC:PA-ST:PA-OM2:D01/2 - Fiber optic cable 1115587

FL PATCH GUARD KEY - Key 2891521

FL PATCH GUARD - Port Guard Security Element 2891424

FL DIN RA - DIN rail adapter 2891053

MC 1000T-MM ST - FO converters 1330244

FL MC 2000T ST - FO converters

2891316