SFP2-1S-1-6A-230AC-PT - EMC filter surge protection device - 1292417

Notes

General
Note	Only for use in IT systems between L-PE if the exposed conductive parts of the equipment of the low-voltage electrical installation are connected to the grounding system of the transformer station. (common grounding of the HV transformer station and the exposed conductive parts of the LV consumer installation. RE = RA in accordance with IEC 60364-4-44:2007 Figure 44.A1 and Table 44.A1).

Product properties

Product type	EMC filters
IEC power supply system	TN
	TT
	IT
Type	DIN rail module, one-piece
Number of positions	2
Surge protection fault message	Optical, remote indicator contact
Insulation characteristics
Overvoltage category	III
Pollution degree	2
IEC test classification	T3
EN type	T3
Number of ports	Two

Electrical properties

Maximum power dissipation for nominal condition	≤ 2.5 W
Indicator/remote signaling
Connection name	Remote fault indicator contact
Switching function	Changeover contact
Operating voltage	12 V AC ... 250 V AC
	250 V DC (250 mA DC)
Operating current	100 mA AC ... 1 A AC
	1 A DC (48 V DC)

Connection data

Connection method	Push-in connection
Conductor cross section flexible	0.5 mm² ... 6 mm²
Conductor cross section rigid	0.5 mm² ... 4 mm²
Conductor cross section AWG	20 ... 10

Dimensions

Material specifications

Color	light gray (RAL 7035)
Flammability rating according to UL 94	V-0
Insulating material	PC
Housing material	PC-GF10

Mechanical properties

Mechanical data
Open side panel	No

Protective circuit

Mode of protection	L-N
		L-PE
		N-PE
Nominal voltage U_N	240 V AC (TN)
		240 V AC (TT - only in use with RCD)
		240 V AC (IT - see note)
Nominal frequency f_N	50 Hz (60 Hz)
Maximum continuous voltage U_C	264 V AC
Rated load current I_L	6 A (70 °C)
Protective conductor current I_PE	≤ 0.5 mA
Reference test voltage U_REF	264 V AC
Combination wave U_OC	6 kV
Voltage protection level U_p	≤ 1 kV
TOV behavior at U_T (L-N)	457 V AC (5 s / withstand mode)
TOV behavior at U_T (L-N)		457 V AC (120 min / safe failure mode)
TOV behavior at U_T (L-PE)	457 V AC (5 s / withstand mode)
		457 V AC (120 min / withstand mode)
		1464 V AC (200 ms / safe failure mode)
TOV behavior at U_T (N-PE)	1200 V AC (200 ms / safe failure mode)
Response time t_A	≤ 100 ns
Capacity (L-N)	2x 1 µF ±20 % (X2-250 V)
Capacity (L-N)		10 nF ±20 % (X2-275 V)
Capacity (L-PE)	2.2 nF ±20 % (Y2-250 V)
Capacity (N-PE)	2.2 nF ±20 % (Y2-250 V)
Max. required back-up fuse	6 A (MCB C)
Input attenuation aE, sym.	20 dB (≥ 100 kHz / 50 Ω)
Input attenuation aE, asym.	30 dB (≥ 1 MHz / 50 Ω)
Short-circuit current rating I_SCCR	6 kA AC
Filter data
Discharge resistance	940 kΩ (±1 %)

Environmental and real-life conditions

Ambient conditions
Degree of protection	IP20
Ambient temperature (operation)	-40 °C ... 70 °C
Ambient temperature (storage/transport)	-40 °C ... 70 °C
Altitude	≤ 2000 m (amsl)
Permissible humidity (operation)	5 % ... 95 %
Shock (operation)	15g (Half-sine / 6 ms / 100x ±X, ±Y, ±Z)
Vibration (operation)	1g (1-150 Hz/10 cycles/XYZ)

Standards and regulations

Mounting

Item number	1292417
Packing unit	1 pc
Minimum order quantity	1 pc
Sales key	CLC161
Product key	CLC161
GTIN	4063151525354
Weight per piece (including packing)	812 g
Weight per piece (excluding packing)	620 g
Country of origin	CN

EU RoHS
Fulfills EU RoHS substance requirements	Yes
Exemption	7(a)
China RoHS
Environment friendly use period (EFUP)	EFUP-25 An article-related China RoHS declaration table can be found in the download area for the respective article under "Manufacturer declaration". For all articles with EFUP-E, no China RoHS declaration table issued and required.
EU REACH SVHC
REACH candidate substance (CAS No.)	Hexahydromethylphthalic anhydride (CAS: n/a)
		Lead (CAS: 7439-92-1)

SFP2-1S-1-6A-230AC-PT - EMC filter surge protection device

1292417