Ambient temperature (operation) (fixed installation)
-40 °C ... 70 °C (fixed installation)
Ambient temperature (operation) (flexible installation)
-10 °C ... 70 °C (flexible installation)
Ambient temperature (storage/transport)
-40 °C ... 80 °C
Altitude
≤ 2000 m
Operating voltage (DC)
≤ 30 V DC
Nominal operating mode
100% operating factor
Current (Per path)
≤ 500 mA (uncoiled)
Supported controller YOKOGAWA CS3000 CentumVP
Suitable I/O card
ADV161
ADV561
Supported controller YOKOGAWA STARDOM
Suitable I/O card
NFDV161
NFDV561
Cable length
35 m
50X0.14 [PVC]
UL AWM Style
2464/1061
Number of positions
50
Shielded
yes
Cable type
50X0.14 [PVC]
Conductor type
Assembled shielded round cable
Conductor structure signal line
7x 0.16 mm
AWG signal line
26
Conductor cross section
50x 0.14 mm²
Wire diameter incl. insulation
1 mm ±0.03 mm
External cable diameter
11.00 mm ±0.3 mm
Outer sheath, material
Semi-rigid PVC
External sheath, color
gray
Conductor material
Tin-plated Cu litz wires
Cable resistance
≤ 145 Ω/km (at 20 °C)
Insulation resistance
≥ 20 MΩ*km (20 °C)
Smallest bending radius, fixed installation
114 mm
Smallest bending radius, movable installation
205 mm
Dynamic load capacity (bending)
Max. bending cycles: 5000 (at a radius of ≥ 18x outside diameter)
Halogen-free
no
Flame resistance
IEC 60332-1-2 (raw cable)
VDE 0842, Part 332-1-2 (raw cable)
IEC 60332-3-22 (raw cable)
UL VW-1
CSA FT-1
Resistance to oil
can withstand occasional splashes (raw cable)
Connection 1
Connection in acc. with standard
IEC 60603-13 (in compliance)
Connection method
IDC/FLK socket strip
Number of connections
1
Number of positions
50
Insertion/withdrawal cycles
> 50
Pitch
2.54 mm
Connection 2
Connection in acc. with standard
IEC 60603-13 (in compliance)
Connection method
Yokogawa, KS compatible
Number of connections
1
Number of positions
50
Tightening torque
0.5 Nm (Screw connection)
Insertion/withdrawal cycles
> 50
Pitch
2.54 mm
Fixing to IO cards
Connection method
Screw connection
Tightening torque
0.5 Nm
Notes on operation
For proper use, the specifications of the installation directive (see Downloads) must be observed. For applications or use with third-party products, the specifications, and the safety and warning instructions of the respective third-party manufacturer must also be met.
