Attachment plug with replaceable surge protection for coaxial signal interfaces, transmission capacity ≤200 W. Connection: UHF female/female.
Product details
General
Note
To meet the discharge conditions for DC voltages, please note the following information: "The surge protective device should be used together with a transmitter unit, which shuts down in the event of a short-circuit."
Product type
Surge protection for transceiver systems
IEC test classification
C2
C3
D1
Type
Intermediate plug
Surge protection fault message
none
Insulation characteristics
Overvoltage category
III
Connection method
UHF connector
Width
60.5 mm
Height
40 mm
Depth
18.1 mm
Housing material
Nickel-plated brass
Mechanical data
Open side panel
No
Direction of action
Line-Shield/Earth Ground
Maximum continuous operating voltage UC
130 V AC
Operating effective current IC at UC
≤ 1 µA
Protective conductor current IPE
≤ 1 µA
Nominal discharge current In (8/20) µs (line-ground)
10 kA
Nominal discharge current In (8/20) µs (line-shield)
10 kA
Pulse discharge current Iimp (10/350) µs (line-earth)
2.5 kA
Pulse discharge current Iimp (10/350) µs (line-shield)
2.5 kA
Total surge current (8/20) µs
10 kA
Impulse discharge current (10/350) µs, peak value limp
2.5 kA
Output voltage limitation at 1 kV/µs (line-earth) spike
≤ 600 V
Output voltage limitation at 1 kV/µs (line-shield) spike
≤ 600 V
Output voltage limitation at 1 kV/µs (line-earth) static
≤ 600 V
Output voltage limitation at 1 kV/µs (line-shield) static
≤ 600 V
Voltage protection level Up (line-earth)
≤ 600 V
Voltage protection level Up (line-shield)
≤ 600 V
Response time tA (line-earth)
≤ 100 ns
Response time tA (line-shield)
≤ 100 ns
Input attenuation aE, asym.
typ. 0.3 dB (≤ 250 MHz / 50 Ω)
Cut-off frequency fg (3 dB), asym. (shield) in 50 Ω system
typ. 950 MHz
Voltage standing wave ratio VSWR in a 50 Ω system
≤ 1.20 (≤ 80 MHz)
≤ 1.50 (≤ 200 MHz)
Permissible HF power Pmax at VSWR = xx (50 ohm system)
