1 Terminal blocks 2019 / 2020

Table of contents Illustrated product range overview COMPLETE line – The comprehensive solution for the control cabinet CLIPLINE complete system features PT Push-in connection terminal blocks PTPOWER high-current terminal blocks 4 16 18 28 UT screw connection terminal blocks 142 ST spring-cage connection terminal blocks 200 Terminal blocks CLIPLINE complete QT fast connection terminal blocks COMBI plug-in connection solutions RT, RBO bolt connection terminal blocks HV high-current connectors Accessories Distribution blocks PTFIX PT connection technology Terminal blocks Classic Industry-specific solutions UK universal terminal blocks OTTA, RSC, UHV high-current terminal blocks UBAL universal terminal blocks SK shield connection clamps Energy technology, process technology, photovoltaics, and building installation Service Planning and marking software, services for terminal strips, housings, and markings Technical information and index 250 266 374 398 424 454 606 662 674

Illustrated product range overview Access the right product more quickly from here 10 mm² ... 16 mm² ... Page 121 Page 125 Four-conductor terminal blocks 1.5 mm² ... 2.5 mm² ... 4 mm² ... 6 mm² ... Page 39 Page 71 Page 99 Page 111 Double-level terminal blocks 1.5 mm² ... 2.5 mm² ... 4 mm² ... Page 39 Page 72 Page 99 Three-level terminal blocks 1.5 mm² ... 2.5 mm² ... 4 mm² ... Page 40 Page 73 Page 100 Test disconnect terminal blocks 4 mm² ... 6 mm² ... Page 105 Page 116 Hybrid terminal blocks with single-sided screw connection 2.5 mm² ... 4 mm² ... 6 mm² ... 35 mm² ... Page 84 Page 106 Page 117 Page 128 Feed-through and ground terminal blocks, desk design 1.5 mm² ... 2.5 mm² ... 4 mm² ... Page 44 Page 84 Page 107 Three/four-conductor terminal blocks, desk design 1.5 mm² ... 2.5 mm² ... 4 mm² ... Page 44 Page 84 Page 107 Mini feed-through and ground terminal blocks 1.5 mm² ... 2.5 mm² ... Page 45 Page 97 Marshalling terminals 2.5 mm² ... Page 46 Marshalling patchboards 2.5 mm² ... Page 57 For further information and full technical data, visit phoenixcontact.net/products PHOENIX CONTACT 5

Illustrated product range overview Access the right product more quickly from here Four-conductor terminal blocks 2.5 mm² ... 4 mm² ... Page 149 Page 159 Double-level terminal blocks 2.5 mm² ... 4 mm² ... Page 149 Page 160 Three-level terminal blocks 2.5 mm² ... 4 mm² ... 6 mm² ... Page 150 Page 160 Page 173 Fuse terminal blocks 4 mm² ... 6 mm² ... Page 161 Page 173 Installation terminal blocks 2.5 mm² ... 4 mm² ... 6 mm² ... 10 mm² ... Page 154 Page 170 Page 178 Page 183 16 mm² ... 35 mm² ... Page 185 Page 187 Mini feed-through and ground terminal blocks 2.5 mm² ... 4 mm² ... Page 157 Page 171 10 mm² ... 16 mm² ... Page 243 Page 247 Four-conductor terminal blocks 1.5 mm² ... 2.5 mm² ... 4 mm² ... Page 207 Page 211 Page 229 Double-level terminal blocks 1.5 mm² ... 2.5 mm² ... 4 mm² ... Page 208 Page 212 Page 230 Three-level terminal blocks 2.5 mm² ... Page 213 Diode terminal blocks 2.5 mm² ... 4 mm² ... 6 mm² ... Page 218 Page 232 Page 239 Double-level diode terminal blocks 2.5 mm² ... Page 219 Hybrid terminal blocks with single-sided screw connection 2.5 mm² ... 4 mm² ... 10 mm² ... 35 mm² ... Page 220 Page 233 Page 244 Page 249 For further information and full technical data, visit phoenixcontact.net/products Feed-through and ground terminal blocks, desk design 2.5 mm² ... 4 mm² ... 6 mm² ... Page 221 Page 233 Page 239 PHOENIX CONTACT 7

Illustrated product range overview Access the right product more quickly from here Mini feed-through and ground terminal blocks, with vertical conductor exit 2.5 mm² ... Page 222 Mini feed-through and ground terminal blocks, with horizontal conductor exit 2.5 mm² ... Page 225 Double-level terminal blocks 1.5 mm² ... Page 258 Fuse terminal blocks 2.5 mm² ... Page 264 Disconnect and knife disconnect terminal blocks 1.5 mm² ... Page 258 Hybrid terminal blocks with single-sided screw connection 1.5 mm² ... 2.5 mm² ... Page 260 Page 264 COMBI plug-in connection solutions Page 267 Feed-through, multi-conductor, multi-level, and ground terminal blocks with Push-in connection 1.5 mm² ... 2.5 mm² ... 4 mm² ... 6 mm² ... Page 276 Page 290 Page 324 Page 346 Terminal blocks that can be connected on both sides 1.5 mm² ... 2.5 mm² ... 4 mm² ... Page 278 Page 293 Page 325 Plug-in measuring transducer disconnect terminal blocks 6 mm² ... Page 347 Terminal blocks that can be connected on both sides 2.5 mm² ... 4 mm² ... Page 304 Page 330 Test disconnect terminal blocks 4 mm² ... Page 331 Headers 2.5 mm² ... 4 mm² ... Page 305 Page 333 Connectors with screw connection – assembled and for self-assembly 2.5 mm² ... 4 mm² ... 6 mm² ... Page 306 Page 335 Page 356 For further information and full technical data, visit phoenixcontact.net/products PHOENIX CONTACT 9

Illustrated product range overview Access the right product more quickly from here Connectors with spring-cage connection – assembled and for self-assembly 2.5 mm² ... 4 mm² ... 6 mm² ... Page 318 Page 345 Page 356 Feed-through, multi-level, and ground terminal blocks with fast connection 1.5 mm² ... Page 286 Connectors with fast connection – assembled and for self-assembly 1.5 mm² ... Page 288 Latching and strain relief systems PR ..., PRZ ... Page 363 RT bolt connection terminal blocks Page 375 Feed-through and ground terminal blocks 2.5 mm² ... 6 mm² ... 35 mm² ... Page 378 Page 380 Page 384 Feed-through terminal blocks, open design 2.5 mm² ... Page 379 6 mm² ... Page 381 35 mm² ... Page 385 Disconnect terminal blocks 6 mm² ... Page 383 Accessories Page 399 Plug-in bridges FBS ... FBSR ... Page 402 Page 406 Test accessories PS ..., MPS ..., PAI ... Page 410 Fuse plugs P-FU...-5 Page 414 PTFIX distribution blocks Page 425 Distribution blocks 1.5 mm² ... 2.5 mm² ... 4 mm² ... Page 428 Page 438 Page 446 For further information and full technical data, visit phoenixcontact.net/products PHOENIX CONTACT 11

Illustrated product range overview Access the right product more quickly from here Initiator/actuator terminal blocks DIK ..., DOK ..., VIOK ... Page 480 Lever-type fuse terminal blocks UK 5-HESI N Page 490 Screw cap fuse terminal blocks UK ...-DREHSI Page 496 Basic terminal blocks for isolating and component plugs UK ...-TG Page 506 Test disconnect terminal blocks URTK 6 Page 523 Test disconnect terminal blocks URTK/SP Page 525 Double-level diode terminal blocks UKK ...-DIO Page 528 Thermoelectric voltage terminal blocks MTKD ... Page 532 Spring-assisted test disconnect terminal blocks USST-T ... Page 548 Micro/mini terminal blocks MT 1,5 ... Page 552 Micro/mini terminal blocks MTTB 1,5 ... Page 555 Mini strip terminal blocks MBK ... Page 558 High-current connectors UHV ... Page 574 Device terminal blocks G ..., GE ... Page 576 Trunk line branch terminals UDB 2X... Page 580 Universal terminal blocks for aluminum conductors UBAL ... Page 583 For further information and full technical data, visit phoenixcontact.net/products PHOENIX CONTACT 13

Accessories Illustrated product range overview Access the right product more quickly from here Test plugs for UK series PS ... Page 586 Test plugs for UK series MPS ... PS-UK ... Page 591 Page 591 Warning labels WS ... Page 593 Support brackets for direct mounting AB ... Page 603 Modular 19" plug-in test system without operating plug and transformer short circuit in the plug-in test socket Page 646 Marking service Page 672 For further information and full technical data, visit phoenixcontact.net/products PHOENIX CONTACT 15

The comprehensive solution for the control cabinet COMPLETE line Comprehensive product portfolio Intuitive handling With COMPLETE line, we offer a complete product portfolio of technologically leading products. These include: – Controllers and I/O modules – Power supplies and device circuit breakers – Terminal blocks and distribution blocks – Relay modules and motor starters – Signal conditioners – Safety technology – Surge protection – Heavy-duty connectors Thanks to the simple, intuitive handling of the coordinated hardware components, you will save time during installation, startup, and maintenance. Push-in connection technology enables you to wire applications quickly – without using tools. The broad, technologically leading product portfolio will always provide you with the right product for standard or special applications. Time savings across the entire engineering process The PROJECT complete planning and marking software supports the entire control cabinet manufacturing process. The program features an intuitive user interface and enables the individual planning, automatic checking, and direct ordering of terminal strips. Reduced logistics costs Reduced variety of parts, thanks to standardized marking, bridging, and testing accessories. The COMPLETE line system coordinates products, design, and accessories enabling you to benefit from maximum reusability, thus reducing your logistics costs. Optimized processes in control cabinet manufacturing From engineering through to manufacturing, COMPLETE line supports you in making your control cabinet production as efficient as possible, thus creating a customized concept for optimizing your processes in control cabinet manufacturing. Our terminal strip production helps you to flexibly manage peak order times or to supply your control cabinet production with fully assembled DIN rails just-in-time. Additional information Find out more about COMPLETE line and your comprehensive solutions for the control cabinet. Visit our website: phoenixcontact.com/completeline For further information and full technical data, visit phoenixcontact.net/products PHOENIX CONTACT 17

CLIPLINE complete system features Product range overview System features 20 With CLIPLINE complete, the unique terminal block system from Phoenix Contact, the choice of connection technology is yours. The following types of connection are available: – Simple PT Push-in connection – Universal UT screw connection – Compact ST spring-cage connection – Fast QT QUICKON connection – COMBI plug-in connection solutions – Robust RT bolt connection. Irrespective of which connection technology you choose, they can all be freely combined, with the same accessories, thanks to the double function shaft. In addition to the flexibility of the terminal block system, CLIPLINE complete also provides added value. The bridging, marking, and test accessories are standardized and can reduce your logistics and storage costs. The CLIPLINE complete terminal block system has been tested and approved for a wide range of national and international approvals. The maximum level of safety in these standards is achieved by routine testing of the standard CLIPLINE complete terminal blocks in accordance with the ATEX Directive. These terminal blocks can be used in the Ex e area.  Your web code: #0567 PHOENIX CONTACT 19

General information The CLIPLINE complete system offers you a uniform range of accessories for all connection technologies. Marking and test accessories are standardized and reduce logistics costs. In addition, all terminal blocks of the CLIPLINE complete system can be freely combined with each other, thanks to the double function shaft. The standardized plug-in zone of the COMBI basic terminal blocks also allows the connection of modules via individually configurable connectors, regardless of the connection technology. CLIPLINE complete terminal blocks with Push-in, spring-cage, fast connection, screw, plug-in, and bolt connection technology let you react flexibly to the demands of your customers anywhere in the world. CLIP PROJECT enables you to configure terminal strips quickly, conveniently, and without errors. You benefit from a consistent process chain thanks to perfect interaction with CAE systems. - The process chain covers data transfer, product selection, the correction function, and complete documentation - In addition to terminal blocks, you can configure other products, e.g., those used in overcurrent and surge protection, power supply, signal conversion, and automation technology - You can create markings quickly and easily and you can control all Phoenix Contact printing systems as well as standard printers Flexible plug-in bridge system The same plug-in bridge for all connection technologies. To allow fast and individual potential distribution, the terminal blocks in the CLIPLINE complete system have two function shafts. These are arranged in one line over all the terminal blocks, allowing for a combination of connection technologies. The 2- to 50-pos. plug-in bridges make it possible to implement all the tasks of potential bridging within a very short time. Reducing bridges connect, for example, UT screw terminal blocks and ST spring-cage terminal blocks. The plug-in bridge bars make contact by being securely latched into the function shaft. They create a removable connection between neighboring terminal blocks. Plug-in connection solutions The COMBI plug-in system enables the time-saving and modular configuration of your application. As with the terminal blocks, COMBI connectors are available with Push-in, screw, spring-cage, and fast connection technologies. The rated values of up to 41 A and 1000 V has made a connection system for signal and power wiring possible. The system meets the most stringent of vibration requirements. Both the terminal blocks and the connectors have a touch-proof design. There is an extensive range of accessories, from the latching to the overall shielding braid. Multifunctional disconnect zone All disconnect terminal blocks in the CLIPLINE complete system have a standardized disconnect zone. Various function plugs are available for use in the disconnect terminal blocks. Isolating plugs are used for simple disconnection. Fuse plugs are designed for the use of cartridge fuse-links. The patented component connector allows you to mount components quickly, without the risk of polarity reversal, and without the need for soldering. Large-surface marking All the terminal points of the terminal blocks in the CLIPLINE complete system have large-surface marking options. This is a precondition for clear wiring and startup, and simplifies assignment during testing and maintenance work. Optional snap-on large marker carriers are available for group and terminal strip markings. Standardized test system The CLIPLINE complete system includes a comprehensive range of test accessories. All test plug contacts are made in the easily accessed function shaft. For individual measuring lines, a test plug with 2.3 mm diameter is available. More complex testing tasks can be implemented using alignable test plugs. The corresponding spacers can be used to assemble individual test adapters which are perfectly suited for use in test laboratories. CLIPLINE complete System features Bridge Insert Disconnect Mark Test For further information and full technical data, visit phoenixcontact.net/products PHOENIX CONTACT 21

Screw connection CLIPLINE complete System features Material properties Connection principle The metal parts of the UT screw connection terminal blocks are made from high-grade, strain-crack-proof, and corrosion-proof copper alloys as a standard feature. This eliminates the possibility of electrolytic corrosion in the presence of moisture and the risk of rusting. The consequences, such as unreliable electrical contacts and/or jammed screws, are also prevented. Another advantage is the low temperature rise due to good electrical conductivity. The surface of the metal parts is protected by lead-free, galvanic nickel or tin plating. The insulating housing of the UT screw connection terminal blocks is made from recyclable PA 6.6. This elastic plastic with high impact strength is halogen-free and UV-resistant. Further characteristics include the good tropical and termite resistance, high chemical resistance, and excellent aging characteristics. Polyamide 6.6 is used with operating temperatures up to 130°C and is certified for the flammability rating V0 in accordance with UL 94. UT screw connection terminal blocks are designed for the most stringent requirements. For more than 80 years, they have proven themselves a billion times over in all applications. An important characteristic is the maintenance-free conductor connection. There is no need to retighten the terminal block screws. The screws are prevented from loosening by the Reakdyn principle, a screw locking technique developed and patented by Phoenix Contact. Conductors for Phoenix Contact UT screw connection terminal blocks can be clamped without any pretreatment. Splicing protection can also be implemented in the form of ferrules. A special characteristic of the screw clamping body is the multi-conductor connection, which is often required. Very large conductor cross sections up to 240 mm2 can also be wired gas-tight and with long-term stability thanks to the high contact forces. For further information and full technical data, visit phoenixcontact.net/products PHOENIX CONTACT 23

Fast connection CLIPLINE complete System features Material properties Connection principle The patented contact metals of the QT fast connection terminal blocks are made from a special, high-grade copper alloy. This combines good electrical conductivity with excellent elastic characteristics. The surface of the metal parts is protected by lead-free, galvanic nickel or tin plating. The insulating housings of the fast-connection terminal blocks are made from recyclable PA 6.6. This elastic plastic with high impact strength is halogen-free and UV-resistant. Further characteristics include the good tropical and termite resistance, high chemical resistance, and excellent aging characteristics. Polyamide 6.6 is used with operating temperatures up to 130°C and is certified for the flammability rating V0 in accordance with UL 94. QT QUICKON terminal blocks are designed for fast conductor connection. It is no longer necessary to strip or fit the splicing protection. The cables just need to be cut to length for contact to be made in a matter of seconds. An important characteristic is the space-saving twist connection. Due to the simplicity of the connection, the wiring time is reduced by up to 60 percent. A standard screwdriver is used to operate the terminal blocks and the switching states are clearly signaled by engagement points in the start and end position. Rigid and flexible conductors from 0.25 to 2.5 mm2 can be wired without aids such as guide ferrules. When a conductor is connected, the conductor insulation is cut open, displaced, and the conductor is securely engaged in the end position where it makes a large-area, gas-tight contact. The high quality of the QUICKON fast connection is verified by the fact that this connection is certified in accordance with the standard for Ex e applications, as are the screw and spring connections. For further information and full technical data, visit phoenixcontact.net/products PHOENIX CONTACT 25

Bolt connection CLIPLINE complete System features Material properties Connection principle All metal parts of the bolt connection terminal blocks are made from corrosion- free materials. The conductive metals consist of high-grade copper alloys. Due to their good electrical conductivity, they ensure a low temperature rise. The surface of the metal parts is protected by lead-free, galvanic nickel or tin plating. The insulating housing of the bolt connection terminal blocks is made from recyclable PA 6.6. This elastic plastic with high impact strength is halogen-free and UV resistant. Further characteristics include the good tropical and termite resistance, high chemical resistance, and excellent aging characteristics. Polyamide 6.6 is used with operating temperatures up to 130°C and is certified for the flammability rating V0 in accordance with UL 94. RT bolt connection terminal blocks have been developed with a robust design and offer convenient wiring for ring cable lugs. An important characteristic is the hinged cover which can be swiveled open and which features a captive cap nut. This ensures quick and easy ring cable lug wiring. The integrated screw locking in the form of a spring retainer guarantees reliability, even in applications which are subject to shock and vibration. All ring cable lugs can be connected in accordance with DIN 46234, DIN 46235 or DIN 46237. A special characteristic of the bolt connection is the often required multi-conductor connection, on which up to four cable lugs can be connected per bolt. All types of conductors up to 300 m2 can be wired securely and with long-term stability. For further information and full technical data, visit phoenixcontact.net/products PHOENIX CONTACT 27

PT Push-in connection terminal blocks The PT Push-in connection terminal blocks from the CLIPLINE complete system have been developed for direct conductor connection and offer a wide range of application options. Easy handling and direct, tool-free connection with up to 50 percent lower insertion forces are the key advantages of this terminal technology. When rigid conductors from 0.25 mm2 or conductors with ferrules from 0.34 mm2 are inserted, the contact spring is automatically opened. This provides the required pressure force against the current bar. The integrated push button allows you to release conductors or to connect small conductor cross sections from 0.14 mm2 with any type of tool easily and without direct contact with live parts. The PT connection technology has been tested and approved for a range of approvals. These include, for example, vibration resistance in accordance with railway standard EN 50155 and shock and corrosion resistance in accordance with current shipbuilding registers. It is also certified for process engineering in areas with increased safety (Ex e).  Your web code: #1126 Product range overview 1.5 mm2 Feed-through, multi-conductor, multi-level, and ground terminal blocks Initiator/actuator terminal blocks Knife disconnect terminal blocks Desk-design terminal blocks Mini feed-through and ground terminal blocks Marshalling terminals Marshalling patchboards 2.5 mm2 Feed-through, multi-conductor, multi-level, and ground terminal blocks Disconnect and knife disconnect terminal blocks Diode terminal blocks Hybrid terminal blocks with screw connection on one side Desk-design terminal blocks Desk-design disconnect and knife disconnect terminal blocks Terminal blocks with conductor connections on the side Mini feed-through and ground terminal blocks Installation terminal blocks 4 mm2 Feed-through, multi-conductor, multi-level, and ground terminal blocks Fuse terminal blocks Disconnect and knife disconnect terminal blocks Diode terminal blocks Test disconnect terminal blocks Hybrid terminal blocks with screw connection on one side Desk-design terminal blocks Installation terminal blocks 6 mm2 Feed-through, multi-conductor, multi-level, and ground terminal blocks Fuse terminal blocks Disconnect and knife disconnect terminal blocks Diode terminal blocks Test disconnect terminal blocks Hybrid terminal blocks with screw connection on one side Installation terminal blocks 10 mm2, 16 mm2, and 35 mm2 Feed-through, multi-conductor, and ground terminal blocks Fuse terminal blocks Installation terminal blocks Hybrid terminal blocks with screw connection on one side PTPOWER Power-Turn high-current terminal blocks 35 mm2 - 185 mm2 39 41 42 44 45 46 57 71 74 81 84 84 86 88 90 97 99 101 103 104 105 106 107 108 111 112 113 115 116 117 118 121 121 126 128 132 PHOENIX CONTACT 29

Terminal blocks – CLIPLINE complete PT Push-in connection terminal blocks The reducing bridge enables terminal The double function shaft can be used blocks with different nominal cross sections to be connected easily, e.g., a PT 10 Push-in terminal block to a PT 2,5. Power blocks can be created quickly using the reducing bridge. to connect any number of terminal blocks with two-position bridges. The 2- to 50-pos. bridges allow up to 50 terminal blocks to be bridged in one step. Bridging between non-adjacent terminal blocks is established by removing individual contact tabs from the standard bridge. Two potentials can then be routed in parallel through a terminal strip. The contact points can also be marked. The isolated feed-through connector P-FIX, isolating connector P-DI, component connector P-CO and the cartridge fuse connector P-FU can be used in the universal plug-in zone of the disconnect terminal block. For measuring lines, a test plug with 2.3 mm diameter is available. All measurement and testing tasks can be carried out quickly using test adapters for 4 mm diameter test plugs and the alignable test plugs. Warning labels are available for the clear marking of mains connections. These are plugged into the 2.3 mm wide test holes on the PT terminal blocks, latch reliably into place, and are also form-fitting. Push-in COMBI terminal blocks are Automotive flat-type fuse terminal available for the plug-in configuration of signal wiring. The system is touch-proof and offers plugs for self-assembly with extensive accessories. blocks with 4 mm2 conductor connection are available in the same shape as the feed-through terminal blocks. All terminal blocks can be consistently bridged with one another with the double function shaft. The compact lever-type fuse terminal blocks are the same shape as the feed-through terminal blocks. They can be consistently marked and bridged. A time-saving potential distribution is easily created using bridging between non-adjacent terminal blocks. For further information and full technical data, visit phoenixcontact.net/products PHOENIX CONTACT 31

PTME ... test disconnect terminal blocks PTTB ...BE component terminal blocks PT ... and PTT ... knife disconnect terminal blocks Terminal blocks – CLIPLINE complete PT Push-in connection terminal blocks – Convenient wiring of current transformer measuring circuits – Safe longitudinal and perpendicular disconnection of the current paths – The switch units are latched in the respective limit positions – Unintentional switching is prevented by means of optional switching locks – Up to six function shafts integrated per terminal block for potential distribution and testing  Your web code: #0071 – Component terminal blocks can be used for complex switching tasks in all applications – Convenient disconnection of measuring and closed-loop control circuits by means of a disconnect knife – Individual and convenient integration – Disconnect knife reliably snapped into of components such as diodes, resistors, LEDs, and fuses into circuits – Huge product variety with selectable prefabricated or retrofittable versions – Maximum flexibility and modularity with solder-free, self-assembled, and pre-assembled component connectors for basic terminal blocks with disconnect function – Maximum safety requirements are taken into consideration. Printed circuit diagrams and symbols reduce the risk of faulty wiring considerably  Your web code: #1392 the limit positions – Flexible testing facilities on both sides of the disconnect point – Optional snap-in switching lock effectively prevents unintentional switching – Universal disconnect zone for also accommodating isolating plugs, feed-through connectors, component connectors, and fuse plugs  Your web code: #0070 For further information and full technical data, visit phoenixcontact.net/products PHOENIX CONTACT 33

PTRV ... marshalling terminals PTRVB ... potential distributors PTMC ... marshalling patchboards Terminal blocks – CLIPLINE complete PT Push-in connection terminal blocks – Marshalling terminals with a space-saving – Space-saving potential distribution with – Modular marshalling patchboards with design up to 32 connections stackable concept – Signal wiring on four or eight levels – Color coding in up to 11 colors for clear identification of the wiring levels – Potential distribution blocks can be individually adapted with plug-in bridges for assembly – Front and rear wiring – Individual color coding of the terminal points – Patented double connection for reliable – Versions with 6 mm2 supply option and – Easy and clear wiring, thanks to Push-in contacting 32 A connection technology – Testing facility on every double – Versions are available in blue and red – Convenient testing facility and marking connection  Your web code: #0160 for clear assignment – Large-surface marking options  Your web code: #0160 option for the terminal points – Various mounting methods on different carrier systems  Your web code: #0161 For further information and full technical data, visit phoenixcontact.net/products PHOENIX CONTACT 35

Hybrid potential collection terminal blocks with PTU ... Push-in and screw connection PTPOWER Power-Turn high-current terminal blocks PTV ... feed-through, TWIN, QUATTRO, and knife disconnect terminal blocks Terminal blocks – CLIPLINE complete PT Push-in connection terminal blocks – Simple potential collection or distribution – Compact, space-saving design – Can be bridged with standard plug-in bridges – High-current spring terminal blocks – Clear wiring without bend radii, thanks to with patented Power-Turn connection – Quick and easy wiring of conductor cross sections up to 185 mm2 the conductors being inserted from the side – Easily identifiable connection markings – Easy to test with 2.3 mm standard test – Alternative direct plug-in of the on the side of the terminal connection – Large-surface marking options  Your web code: #1394 conductor, e.g., in confined mounting positions – Easy potential distribution by means – Wire markings easy to attach and read off, thanks to the conductors being inserted from the side of insertion bridges that can be locked – The conductor connection does not – Tap-off terminal blocks that can be snapped on from both sides enable voltage tap-off of up to 4 x 16 mm2 per terminal block – Installation on 35 mm DIN rail or as flange solution for direct mounting  Your web code: #0158 require any additional space above the terminal – The connection principle and conductor insertion are self-explanatory, thanks to the Push-in connection technology in combination with the wiring direction of the screw terminal blocks – The spring connection does not require any subsequent testing of the terminal point – Use of standard accessories from the CLIPLINE complete system For further information and full technical data, visit phoenixcontact.net/products PHOENIX CONTACT 37

Feed-through, multi-conductor, multi-level, and ground terminal blocks Notes: 1) For additional accessories and technical data, see page 38. For 1 mm² conductors with ferrule and plastic sleeve, using the AI-S 1-8 TQ ferrule is recommended, Order No. 1200293. For information on installation and using accessories for Ex applications, see page 678. ① ② Terminal blocks – CLIPLINE complete 1.5 mm2 PT Push-in connection terminal blocks ① ② 17.5 A, feed-through terminal block 17.5 A, feed-through terminal block,          Ex:  EAC Ex  SEV13ATEX0159U / IECEx SEV13.0005U Technical data1) 3 connections          Ex:  EAC Ex  SEV13ATEX0159U / IECEx SEV13.0005U Technical data1) [mm] [A] [V] [A] / [mm²] Width 3.5 Imax. [A] 17.5 17.5 IEC 500 17.5 / 1.5 Length 45 Umax. [V] 500 UL / CUL 600 15 / - Height 32 (NS 35/7,5) max. Ø [mm²] 0.14 - 1.5 CSA 600 15 / - AWG (UL) 26-14 Ex 352 15 / 1.5 Width 3.5 Imax. [A] 17.5 17.5 IEC 500 17.5 / 1.5 Length 54 Umax. [V] 500 UL / CUL 600 15 / - Height 32 (NS 35/7,5) max. Ø [mm²] 0.14 - 1.5 CSA 600 15 / - AWG (UL) 26-14 Ex 352 15 / 1.5 Ordering data Ordering data Color Type gray blue green-yellow PT 1,5/S PT 1,5/S BU PT 1,5/S-PE Order No. ① 3208100 ① 3208126 ② 3208139 Accessories1) gray orange D-PT 1,5/S D-PT 1,5/S-0,8 OG 3208142 1029569 50 50 50 50 50 Pcs./Pkt. Type PT 1,5/S-TWIN PT 1,5/S-TWIN BU PT 1,5/S-TWIN-PE Accessories1) D-PT 1,5/S-TWIN D-PT 1,5/S-TWIN-0,8 OG 3208184 1029571 Order No. ① 3208155 ① 3208168 ② 3208171 Pcs./Pkt. 50 50 50 50 50 Dimensions Maximum electrical data Maximum bridge current Rated data Rated voltage Nominal current / cross section Description Terminal block Ground terminal Cover, width: 2.2 mm Cover, 0.8 mm width Feed-through, multi-conductor, multi-level, and ground terminal blocks Notes: 1) For additional accessories and technical data, see page 38. For 1 mm² conductors with ferrule and plastic sleeve, using the AI-S 1-8 TQ ferrule is recommended, Order No. 1200293. For information on installation and using accessories for Ex applications, see page 678. ① ② ③ ① ② ③ Dimensions Maximum electrical data Maximum bridge current Rated data Rated voltage Nominal current / cross section Description Terminal block with interrupted current bar with potential distribution Ground terminal Cover, width: 2.2 mm Cover, 0.8 mm width 17.5 A, feed-through terminal block, 16 A, double-level terminal block, 4 connections          Ex:  EAC Ex  SEV13ATEX0159U / IECEx SEV13.0005U Technical data1) 4 connections        Ex:  EAC Ex  SEV13ATEX0159U / IECEx SEV13.0005U Technical data1) [mm] [A] [V] [A] / [mm²] Width 3.5 Imax. [A] 17.5 17.5 IEC 500 17.5 / 1.5 Length 63.2 Umax. [V] 500 UL / CUL 600 15 / - Height 32 (NS 35/7,5) max. Ø [mm²] 0.14 - 1.5 CSA 600 15 / - AWG (UL) 26-14 Ex 352 15 / 1.5 Width 3.5 Imax. [A] 16 16 IEC 500 16 / 1.5 Length 65.4 Umax. [V] 500 UL / CUL 600 15 / - Height 42.6 (NS 35/7,5) max. Ø [mm²] 0.14 - 1.5 AWG (UL) 26-14 CSA 600 15 / - Ex 352 14.5 / 1.5 Ordering data Ordering data Color Type Pcs./Pkt. Type Order No. ① 3208197 ① 3208208 ② 3208359 PT 1,5/S-QUATTRO PT 1,5/S-QUATTRO BU PT 1,5/S-QUATTRO-U gray blue gray gray green-yellow PT 1,5/S-QUATTRO-PE ③ 3208333 Accessories1) gray orange D-PT 1,5/S-QUATTRO D-PT 1,5/S-TWIN-0,8 OG 3208375 1029571 Order No. ① 3208511 ① 3208524 ② 3208540 ③ 3208537 Pcs./Pkt. 50 50 50 50 50 50 PTTB 1,5/S PTTB 1,5/S BU PTTB 1,5/S-PV PTTB 1,5/S-PE 50 50 50 50 50 50 Accessories1) D-PTTB 1,5/S D-PTTB 1,5/S-0,8 OG 3208579 1029589 For further information and full technical data, visit phoenixcontact.net/products PHOENIX CONTACT 39

Terminal blocks – CLIPLINE complete 1.5 mm2 PT Push-in connection terminal blocks Initiator/actuator terminal blocks Notes: 1) For additional accessories and technical data, see page 38. For 1 mm² conductors with ferrule and plastic sleeve, using the AI-S 1-8 TQ ferrule is recommended, Order No. 1200293. ① ② ③ ① ② ③ Dimensions Maximum electrical data Maximum bridge current Rated data Rated voltage Nominal current / cross section 13.5 A, three-conductor initiator 13.5 A, four-conductor actuator terminal block terminal block       Technical data1) Technical data1) [mm] [A] [V] [A] / [mm²] Width 3.5 Imax. [A] 13.5 17.5 IEC 250 13.5 / 1.5 Length 74.4 Umax. [V] 250 UL / CUL 300 15 / - Height 41.5 (NS 35/7,5) max. Ø [mm²] 0.14 - 1.5 AWG (UL) 26-14 CSA 300 15 / - Ex - - / - Width 3.5 Imax. [A] 13.5 17.5 IEC 250 13.5 / 1.5 Length 90.8 Umax. [V] 250 UL / CUL 300 15 / - Height 41.5 (NS 35/7,5) max. Ø [mm²] 0.14 - 1.5 AWG (UL) 26-14 CSA 300 15 / - Ex - - / - Ordering data Ordering data Description Color Type Pcs./Pkt. Type gray gray PTIO 1,5/S/3 PTIO 1,5/S/3-LED 24 RD PTIO 1,5/S/4 PTIO 1,5/S/4-LED 24 RD Order No. ① 3244410 ② 3244423 Terminal block Red LED, 15 - 30 V DC, 0.31 - 0.95 mA, LED between upper and middle level Green LED, 15 - 30 V DC, 0.31 - 0.95 mA, LED between upper and middle level Terminal block, with PE connection gray PTIO 1,5/S/3-PE ③ 3244449 gray PTIO 1,5/S/3-LED 24 GN ② 3244436 gray D-PTIO 1,5/S/3 3244575 Accessories1) Order No. ① 3244452 ② 3244517 Pcs./Pkt. 50 50 50 50 50 PTIO 1,5/S/4-LED 24 GN ② 3244520 PTIO 1,5/S/4-PE ③ 3244465 Accessories1) D-PTIO 1,5/S/4 3244588 50 50 50 50 50 Cover, width: 2.2 mm Power terminals Notes: 1) For additional accessories and technical data, see page 38. 2) In the case of central power feed. ① ① 2.5 (4) mm², 20 A, power terminal block 2.5 (4) mm², 20 A, feed-in terminal with PE connection       Dimensions Maximum electrical data Maximum bridge current Rated data Rated voltage Nominal current / cross section Rated cross section Cross section range Connection capacity 1 conductor 2 flexible conductors with a TWIN ferrule Connection cross sections directly plug-in [mm] [A] [V] [A] / [mm²] [mm²] AWG [mm²] [mm²] [mm²] Width 7 Imax. [A] 202) 17.5 IEC 250 20 / 2.5 2.5 24 - 12 Rigid 0.2 - 4 - 0.34 - 4 Description Color Type Technical data1) Technical data1) Length 74.4 Umax. [V] 250 UL / CUL 300 16 / - - Flexible 0.2 - 2.5 - - Height 41.5 (NS 35/7,5) max. Ø [mm²] 0.2 - 4 AWG (UL) 24-12 CSA 300 16 / - - Ex - - / - - Ferrule without/with plastic sleeve 0.2 - 2.5 0.2 - 2.5 - 0.5 0.34 - 2.5 0.34 - 2.5 Width 7 Imax. [A] 202) 17.5 IEC 250 20 / 2.5 2.5 24 - 12 Rigid 0.2 - 4 - 0.34 - 4 Length 90.8 Umax. [V] 250 UL / CUL - - / - - Flexible 0.2 - 2.5 - - Height 41.5 (NS 35/7,5) max. Ø [mm²] 0.2 - 4 AWG (UL) 24-12 CSA 300 16 / - - Ex - - / - - Ferrule without/with plastic sleeve 0.2 - 2.5 0.2 - 2.5 - 0.5 0.34 - 2.5 0.34 - 2.5 Ordering data Ordering data Power terminal block Power terminal block, with PE connection Cover, width: 2.2 mm orange orange gray PTIO-IN 2,5/3 OG D-PTIO 1,5/S/3 3244575 Order No. ① 3244559 Pcs./Pkt. Type Order No. Pcs./Pkt. 50 50 PTIO-IN 2,5/4-PE OG D-PTIO 1,5/S/4 ① 3244481 3244588 For further information and full technical data, visit phoenixcontact.net/products PHOENIX CONTACT 50 50 41

Knife disconnect terminal blocks ① ① Notes: 1) For additional accessories and technical data, see page 38. For 1 mm² conductors with ferrule and plastic sleeve, using the AI-S 1-8 TQ ferrule is recommended, Order No. 1200293. Terminal blocks – CLIPLINE complete 1.5 mm2 PT Push-in connection terminal blocks Dimensions Maximum electrical data Maximum bridge current Rated data Rated voltage Nominal current / cross section 10 A, knife disconnect terminal block, 17.5 A, feed-through terminal block, 4 connections 4 connections, same shape           Technical data1) Technical data1) [mm] [A] [V] [A] / [mm²] Width 3.5 Imax. [A] 10 10 IEC 400 10 / 1.5 Length 76.9 Umax. [V] 400 UL / CUL 300 10 / - Height 32 (NS 35/7,5) max. Ø [mm²] 0.14 - 1.5 AWG (UL) 26-16 CSA 300 10 / - Ex - - / - Width 3.5 Imax. [A] 17.5 17.5 IEC 400 17.5 / 1.5 Length 76.9 Umax. [V] 400 UL / CUL 300 10 / - Height 32 (NS 35/7,5) max. Ø [mm²] 0.14 - 1.5 AWG (UL) 26-16 CSA 300 10 / - Ex - - / - Ordering data Ordering data Description Color Type Knife disconnect terminal block Feed-through terminal block, same shape PT 1,5/S-QUATTRO-MT PT 1,5/S-QUATTRO-MT BU gray blue gray blue Order No. ① 3210321 ① 3210322 Cover, 0.8 mm width Accessories1) gray orange D-PT 1,5/S-QUATTRO-MT-0,8 D-PT 1,5/S-QUATTRO-MT-0,8 OG 3210333 3210334 Pcs./Pkt. Type Order No. Pcs./Pkt. 50 50 50 50 PT 1,5/S-QUATTRO-MTD PT 1,5/S-QUATTRO-MTD BU ① 3210328 ① 3210329 Accessories1) D-PT 1,5/S-QUATTRO-MT-0,8 D-PT 1,5/S-QUATTRO-MT-0,8 OG 3210333 3210334 50 50 50 50 Knife disconnect terminal blocks ① ① Notes: 1) For additional accessories and technical data, see page 38. For 1 mm² conductors with ferrule and plastic sleeve, using the AI-S 1-8 TQ ferrule is recommended, Order No. 1200293. 9 A, double-level terminal block with one disconnect knife per level 9 A, double-level terminal block with disconnect knife, upper level can be disconnected           [mm] [V] [A] / [mm²] Width 3.5 Imax. [A] 9 IEC 400 9 / 1.5 Technical data1) Technical data1) Length 86 Umax. [V] 400 UL / CUL 300 10 / - Height 42.6 (NS 35/7,5) max. Ø [mm²] 0.14 - 1.5 CSA 300 10 / - AWG (UL) 26-16 Ex - - / - Ordering data Width 3.5 Imax. [A] 9 IEC 400 9 / 1.5 Length 86 Umax. [V] 400 UL / CUL 300 10 / - Height 42.6 (NS 35/7,5) max. Ø [mm²] 0.14 - 1.5 CSA 300 10 / - AWG (UL) 26-16 Ex - - / - Ordering data Color Type gray blue PTT 1,5/S-2MT PTT 1,5/S-2MT BU Order No. ① 3210351 ① 3210352 Accessories1) gray orange D-PTT 1,5/S-2MT-0,8 D-PTT 1,5/S-2MT-0,8 OG 3210353 3210354 50 50 50 50 Pcs./Pkt. Type PTT 1,5/S-L/MT PTT 1,5/S-L/MT BU Order No. ① 3210341 ① 3210342 Accessories1) D-PTT 1,5/S-2MT-0,8 D-PTT 1,5/S-2MT-0,8 OG 3210353 3210354 Pcs./Pkt. 50 50 50 50 Dimensions Maximum electrical data Rated data Rated voltage Nominal current / cross section Description Knife disconnect terminal block Cover, 0.8 mm width For further information and full technical data, visit phoenixcontact.net/products PHOENIX CONTACT 43

Terminal blocks – CLIPLINE complete 1.5 mm2 PT Push-in connection terminal blocks Feed-through, multi-conductor, multi-level, and ground terminal blocks in desk design Notes: 1) For additional accessories and technical data, see page 38. For 1 mm² conductors with ferrule and plastic sleeve, using the AI-S 1-8 TQ ferrule is recommended, Order No. 1200293. For information on installation and using accessories for Ex applications, see page 678. ① ② ① ② ③ 17.5 A, feed-through terminal block, 16 A, double-level terminal block 4 connections        Ex:   SEV13ATEX0159U / IECEx SEV13.0005U Technical data1)        Ex:   SEV13ATEX0159U / IECEx SEV13.0005U Technical data1) [mm] [A] [V] [A] / [mm²] Width 3.5 Imax. [A] 17.5 - IEC 500 17.5 / 1.5 Length 50.7 Umax. [V] 500 UL / CUL 600 15 / - Height 38.5 (NS 35/7,5) max. Ø [mm²] 0.14 - 1.5 AWG (UL) 26-14 CSA 600 15 / - Ex 352 15 / 1.5 Width 3.5 Imax. [A] 16 16 IEC 500 16 / 1.5 Length 78.8 Umax. [V] 500 UL / CUL 600 15 / - Height 48.2 (NS 35/7,5) max. Ø [mm²] 0.14 - 1.5 AWG (UL) 26-14 CSA 600 15 / - Ex 352 13.5 / 1.5 Ordering data Ordering data Color Type Pcs./Pkt. Type Order No. ① 3214615 ① 3214631 PTS 1,5/S-QUATTRO PTS 1,5/S-QUATTRO BU gray blue gray green-yellow PTS 1,5/S-QUATTRO-PE ② 3214644 Accessories1) gray D-PTS 1,5/S 3214576 Order No. ① 3214657 ① 3214660 ② 3214686 ③ 3214673 Pcs./Pkt. 50 50 50 50 50 PTTBS 1,5/S PTTBS 1,5/S BU PTTBS 1,5/S-PV PTTBS 1,5/S-PE 50 50 50 50 Accessories1) D-PTTBS 1,5/S 3214699 ① Dimensions Maximum electrical data Maximum bridge current Rated data Rated voltage Nominal current / cross section Description Terminal block With potential distribution Ground terminal Cover, width: 2.2 mm Mini feed-through and ground terminal blocks Notes: 1) For additional accessories and technical data, see page 38. For 1 mm² conductors with ferrule and plastic sleeve, using the AI-S 1-8 TQ ferrule is recommended, Order No. 1200293. For more colors for MPT 1,5/S and MP 1,5, visit phoenixcontact.net/products For information on installation and using accessories for Ex applications, see page 678. ① ② 17.5 A, mini feed-through terminal block 17.5 A, single terminal block          Ex:   SEV14ATEX0140U / IECEx SEV14.0010U Technical data1)     Technical data1) Dimensions Maximum electrical data Maximum bridge current Rated data Rated voltage Nominal current / cross section Cross section range Connection capacity [mm] [A] [V] [A] / [mm²] AWG Width 3.5 Imax. [A] 17.5 17.5 IEC 500 17.5 / 1.5 26 - 14 Rigid 1 conductor Connection cross sections directly plug-in [mm²] [mm²] 0.14 - 1.5 0.25 - 1.5 Length 33.55 Umax. [V] 500 UL / CUL 600 15 / - - Flexible 0.14 - 1.5 - Height 28.1 (NS 15) max. Ø [mm²] 0.14 - 1.5 CSA 600 15 / - - AWG (UL) 26-14 Ex 352 14.5 / 1.5 - Ferrule without/with plastic sleeve 0.14 - 1 0.14 - 1.5 0.34 - 1.5 0.34 - 1 Width 4.2 Imax. [A] 17.5 - IEC 500 17.5 26 - 16 Rigid 0.14 - 1.5 0.34 - 1.5 Length 21 Umax. [V] 500 UL / CUL 300 15 / - - Flexible 0.14 - 1.5 - Height 27.2 (NS 15) max. Ø [mm²] 0.14 - 1.5 AWG (UL) 26-14 CSA 300 15 / - - Ex - - / - - Ferrule without/with plastic sleeve 0.25 - 1.5 0.25 - 1.5 0.5 - 1.5 0.5 - 1.5 Ordering data Ordering data Description Terminal block Ground terminal Cover, width: 2.2 mm Color Type gray green-yellow MPT 1,5/S MPT 1,5/S-PE Order No. ① 3248100 ② 3248110 gray D-MPT 1,5/S 3248120 Accessories1) Pcs./Pkt. Type MP 1,5 50 50 50 Order No. ① 3248150 Pcs./Pkt. 50 Accessories1) For further information and full technical data, visit phoenixcontact.net/products PHOENIX CONTACT 45

Potential distributors, four levels – Potential distribution systems with up to 16 connections can be implemented with the PTRV ...-PV terminal block – Blue marshalling terminals for use in Ex i safety circuits < 60 V – Easy potential distribution with bridges and 6 mm2 supply Terminal blocks – CLIPLINE complete 1.5 mm2 PT Push-in connection terminal blocks 20 A, potential distributor, 16 connections       Technical data [mm] [V] [A] / [mm²] AWG [mm²] [mm²] Width 8.3 Imax. [A] 20 IEC 250 17.5 / 1.5 26 - 14 Rigid 0.14 - 2.5 0.34 - 2.5 Length 64 Umax. [V] 250 UL / CUL 300 10 26-14 Flexible 0.14 - 1.5 - Height NS 35/7,5 55.5 max. Ø [mm²] 0.14 - 2.5 CSA 300 10 / - 26-14 AWG (UL) 26-14 IEC/ EN 60079-7 - - - Ferrule without/with plastic sleeve 0.14 - 1.5 0.14 - 1.5 0.34 - 1.5 0.34 - 1.5 Ordering data Dimensions Maximum electrical data Rated data Rated voltage Nominal current / cross section Cross section range Connection capacity 1 conductor Connection cross sections directly plug-in Description Color Type Order No. Pcs./Pkt. Potential distributor, black chambers Chambers: red Chambers: blue Chambers: black Potential distributor, top two chambers yellow, bottom two chambers black top two chambers black, bottom two chambers yellow Potential distributor, without actuation lever, black chambers Chambers: black Potential distributor, without actuation lever, top two chambers yellow, bottom two chambers black top two chambers black, bottom two chambers yellow Spacer plate, width: 8.3 mm Zack marker strip, flat, for marking the DP-PTRV ... spacer plate, unprinted gray gray gray blue gray PTRV 4-PV /BK PTRV 4-PV /RD PTRV 4-PV /BU PTRV 4-PV BU/BK PTRV 4-FE /YEBK gray PTRV 4-FE /BKYE gray FTRV 4-PV /BK blue gray FTRV 4-PV BU/BK FTRV 4-FE /YEBK gray FTRV 4-FE /BKYE Accessories gray white DP-PTRV 4 ZBF 6/9,2 S8:UNBEDRUCKT printed horizontally, numbers 1-8 printed horizontally, letters A-H printed vertically, numbers 1-8 printed vertically, letters A-H labeled in accordance with customer specifications white white white white white ZBF 6/9,2 S8,LGS:1-8 ZBF 6/9,2 S8,LGS:A-H ZBF 6/9,2 S8,QR:1-8 ZBF 6/9,2 S8,QR:A-H ZBF 6/9,2 S8 CUS 3270125 3270246 3270247 3270126 3270130 3270131 3270178 3270181 3270184 3270185 3270163 0803447 0803450 0803451 0803448 0803449 8191575 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 1 For further information and full technical data, visit phoenixcontact.net/products PHOENIX CONTACT 47

Terminal blocks – CLIPLINE complete 1.5 mm2 PT Push-in connection terminal blocks Accessories – Space-saving partition and end cover with isolating function – Same shape as the PTRV ... marshalling panel General data Material Description Cover, can be grouped, unprinted Vertically printed: numbers 1-4 Horizontally printed: numbers 1-4 Vertically printed: numbers 4-1 Horizontally printed: numbers 4-1 Vertically printed: letters A-D Horizontally printed: letters A-D Vertically printed: letters D-A Horizontally printed: letters D-A Marking strips, no loss of pitch, vertically printed, numbers 1-4 Vertically printed, numbers 4-1 Vertically printed, letters A-D Vertically printed, letters D-A Technical data Technical data PA PA Ordering data Ordering data Color Type Order No. Pcs./Pkt. Type Order No. Pcs./Pkt. D-PTRV 4 WH D-PTRV 4 WH 1-4 D-PTRV 4 WH 1-4 LGS D-PTRV 4 WH 4-1 D-PTRV 4 WH 4-1 LGS D-PTRV 4 WH A-D D-PTRV 4 WH A-D LGS D-PTRV 4 WH D-A D-PTRV 4 WH D-A LGS 3270151 3270152 3270234 3270236 3270238 3270153 3270235 3270237 3270239 10 10 10 10 10 10 10 10 10 white white white white white white white white white white white white white TM-PTRV 4,QR:1-4 TM-PTRV 4,QR:4-1 TM-PTRV 4,QR:A-D TM-PTRV 4,QR:D-A 0803464 0803465 0803466 0803467 10 10 10 10 For further information and full technical data, visit phoenixcontact.net/products PHOENIX CONTACT 49

Potential distributors, eight levels – Potential distribution systems with up to 32 connections can be implemented with the PTRV ...-PV terminal block – Blue marshalling terminals for use in Ex i safety circuits < 60 V – Easy potential distribution with bridges and 6 mm2 supply Terminal blocks – CLIPLINE complete 1.5 mm2 PT Push-in connection terminal blocks 20 A, potential distributor, 32 connections       Technical data [mm] [V] [A] / [mm²] AWG [mm²] [mm²] Width 8.3 Imax. [A] 20 IEC 250 17.5 / 1.5 26 - 14 Rigid 0.14 - 2.5 0.34 - 2.5 Length 100 Umax. [V] 250 UL / CUL 300 10 26-14 Flexible 0.14 - 1.5 - Height NS 35/7,5 87.5 max. Ø [mm²] 0.14 - 2.5 CSA 300 10 / - 26-14 AWG (UL) 26-14 IEC/ EN 60079-7 - - - Ferrule without/with plastic sleeve 0.14 - 1.5 0.14 - 1.5 0.34 - 1.5 0.34 - 1.5 Ordering data Dimensions Maximum electrical data Rated data Rated voltage Nominal current / cross section Cross section range Connection capacity 1 conductor Connection cross sections directly plug-in Description Color Type Order No. Pcs./Pkt. Potential distributor, black chambers Chambers: blue Chambers: red Chambers: black Potential distributor, top four chambers yellow, bottom four chambers black top four chambers black, bottom four chambers yellow Potential distributor, without actuation lever, black chambers Chambers: black Potential distributor, without actuation lever, top four chambers yellow, bottom four chambers black top four chambers black, bottom four chambers yellow gray gray gray blue gray PTRV 8-PV /BK PTRV 8-PV /BU PTRV 8-PV /RD PTRV 8-PV BU/BK PTRV 8-FE /YEBK gray PTRV 8-FE /BKYE gray FTRV 8-PV /BK blue gray FTRV 8-PV BU/BK FTRV 8-FE /YEBK gray FTRV 8-FE /BKYE Spacer plate, width: 8.3 mm Cable duct comb, can be snapped on Zack marker strip, flat, for marking the DP-PTRV ... spacer plate, unprinted printed horizontally, numbers 1-8 printed horizontally, letters A-H printed vertically, numbers 1-8 printed vertically, letters A-H labeled in accordance with customer specifications gray gray white white white white white white Accessories DP-PTRV 8 CDC-PTRV ZBF 6/9,2 S8:UNBEDRUCKT ZBF 6/9,2 S8,LGS:1-8 ZBF 6/9,2 S8,LGS:A-H ZBF 6/9,2 S8,QR:1-8 ZBF 6/9,2 S8,QR:A-H ZBF 6/9,2 S8 CUS 3270142 3270249 3270248 3270145 3270148 3270149 3270194 3270196 3270202 3270204 3270166 3270167 0803447 0803450 0803451 0803448 0803449 8191575 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 1 For further information and full technical data, visit phoenixcontact.net/products PHOENIX CONTACT 51

Terminal blocks – CLIPLINE complete 1.5 mm2 PT Push-in connection terminal blocks Accessories – Space-saving partition and end cover with isolating function – Same shape as the PTRV ... marshalling panel General data Material Technical data Technical data PA PA Ordering data Ordering data Description Color Type Order No. Pcs./Pkt. Type Order No. Pcs./Pkt. Cover, can be grouped, unprinted printed vertically, numbers 1-8 printed horizontally, numbers 1-8 printed vertically, numbers 8-1 printed horizontally, numbers 8-1 printed vertically, numbers 1-16 printed horizontally, numbers 1-16 printed vertically, numbers 9-16 printed horizontally, numbers 9-16 printed vertically, numbers 17-24 printed horizontally, numbers 17-24 printed vertically, numbers 25-32 printed horizontally, numbers 25-32 printed vertically, letters A-H printed horizontally, letters A-H printed vertically, letters H-A printed horizontally, letters H-A printed vertically, letters A-P printed horizontally, letters A-P Marking strips, no loss of pitch, printed vertically, numbers 1-8 printed vertically, numbers 8-1 printed vertically, letters A-H printed vertically, letters H-A 3270154 3270155 3270240 3270242 3270244 3270228 3270229 3270211 3270212 3270213 3270214 3270215 3270216 3270156 3270241 3270243 3270245 3270217 3270218 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 D-PTRV 8 WH D-PTRV 8 WH 1-8 D-PTRV 8 WH 1-8 LGS D-PTRV 8 WH 8-1 D-PTRV 8 WH 8-1 LGS D-PTRV 8 WH 1-16 D-PTRV 8 WH 1-16 LGS D-PTRV 8 WH 9-16 D-PTRV 8 WH 9-16 LGS D-PTRV 8 WH 17-24 D-PTRV 8 WH 17-24 LGS D-PTRV 8 WH 25-32 D-PTRV 8 WH 25-32 LGS D-PTRV 8 WH A-H D-PTRV 8 WH A-H LGS D-PTRV 8 WH H-A D-PTRV 8 WH H-A LGS D-PTRV 8 WH A-P D-PTRV 8 WH A-P LGS white white white white white white white white white white white white white white white white white white white white white white white TM-PTRV 8,QR:1-8 TM-PTRV 8,QR:8-1 TM-PTRV 8,QR:A-H TM-PTRV 8,QR:H-A 0803468 0803470 0803471 0803473 10 10 10 10 For further information and full technical data, visit phoenixcontact.net/products PHOENIX CONTACT 53

Terminal blocks – CLIPLINE complete 1.5 mm2 PT Push-in connection terminal blocks Ordering example: Configured marshaling terminal Ordering example: A marshaling terminal with eight levels should be configured as follows in accordance with DIN VDE 0815: The right side is marked red in the upper levels 1 - 4, and the lower levels 5 - 8 are marked white. Please select order number 3001851 from the configurable items. The levels on the left side should be colored. Level 1: blue Level 2: red Level 3: gray Level 4: yellow Level 5: green Level 6: brown Level 7: white Level 8: black Specify the color sequence when ordering, as illustrated below in the ordering example. Available colors: BU RD GY YE GN BN WH BK VT OG PK Blue Red Gray Yellow Green Brown White Black Purple Orange Pink The order data for this ordering example is therefore: Order No. Level 1 Level 2 Level 3 Level 4 Level 5 Level 6 Level 7 Level 8 3001851 / BU / RD / GY / YE / GN / BN / WH / BK To ensure that your order is correct, you need a defined view. This is achieved when the snap-on foot in the top view is located on the left-hand side. In the top level, the letter L is visible on the left-hand side. Level Level Level Level Level Level Level Level Snap-on foot For further information and full technical data, visit phoenixcontact.net/products PHOENIX CONTACT 55

Terminal blocks – CLIPLINE complete 1.5 mm2 PT Push-in connection terminal blocks 24 A, single element, 6 connections 24 A, single element, 4 connections       Width 11 Imax. [A] 241) IEC 60947-7-1 IEC Technical data Length 12.2 Umax. [V] 500 Height 30 max. Ø [mm²] 0.14 - 2.5 UL / CUL CSA Width 11 Imax. [A] 241) IEC 60947-7-1 IEC Technical data Length 8.6 Umax. [V] 500 Height 30 max. Ø [mm²] 0.14 - 2.5 UL / CUL CSA AWG (UL) 24-16 IEC/ EN 60079-7 - - - 300 10 / - 24-16 500 17.51) / - 26 - 14 Rigid 0.14 - 2.5 0.34 - 2.5 300 10 24-16 Flexible 0.14 - 1.5 - Ferrule without/with plastic sleeve 0.14 - 1.5 0.14 - 1.5 0.34 - 1.5 0.34 - 1.5 300 10 / - 24-16 500 17.51) / - 26 - 14 Rigid 0.14 - 2.5 0.34 - 2.5 300 10 24-16 Flexible 0.14 - 1.5 - Ferrule without/with plastic sleeve 0.14 - 1.5 0.14 - 1.5 0.34 - 1.5 0.34 - 1.5 AWG (UL) 24-16 IEC/ EN 60079-7 - - - Ordering data Ordering data Order No. Pcs./Pkt. Type Order No. Pcs./Pkt. 3270300 3270301 3270420 3270421 3270422 3270423 3270424 3270425 3270426 3270427 3270428 3270340 3270341 3270440 3270441 3270442 3270443 3270444 3270445 3270446 3270447 3270448 3270400 3270401 3270403 3270410 3270405 0201744 0201676 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 PTMC 1,5-2 /GY PTMC 1,5-2 /WH PTMC 1,5-2 /BU PTMC 1,5-2 /RD PTMC 1,5-2 /GN PTMC 1,5-2 /BN PTMC 1,5-2 /BK PTMC 1,5-2 /VT PTMC 1,5-2 /OG PTMC 1,5-2 /YE PTMC 1,5-2 /PK FTMC 1,5-2 /GY FTMC 1,5-2 /WH FTMC 1,5-2 /BU FTMC 1,5-2 /RD FTMC 1,5-2 /GN FTMC 1,5-2 /BN FTMC 1,5-2 /BK FTMC 1,5-2 /VT FTMC 1,5-2 /OG FTMC 1,5-2 /YE FTMC 1,5-2 /PK DF-PTMC-O DF-PTMC-U DF-PTMC-NS DF-PTMC-ZB DF-PTMC-2-ZB MPS-MT MPS-IH RD 3270302 3270303 3270430 3270431 3270432 3270433 3270434 3270435 3270436 3270437 3270438 3270342 3270343 3270450 3270451 3270452 3270453 3270454 3270455 3270456 3270457 3270458 3270400 3270401 3270403 3270410 3270406 0201744 0201676 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 Accessories Accessories Type PTMC 1,5-3 /GY PTMC 1,5-3 /WH PTMC 1,5-3 /BU PTMC 1,5-3 /RD PTMC 1,5-3 /GN PTMC 1,5-3 /BN PTMC 1,5-3 /BK PTMC 1,5-3 /VT PTMC 1,5-3 /OG PTMC 1,5-3 /YE PTMC 1,5-3 /PK FTMC 1,5-3 /GY FTMC 1,5-3 /WH FTMC 1,5-3 /BU FTMC 1,5-3 /RD FTMC 1,5-3 /GN FTMC 1,5-3 /BN FTMC 1,5-3 /BK FTMC 1,5-3 /VT FTMC 1,5-3 /OG FTMC 1,5-3 /YE FTMC 1,5-3 /PK DF-PTMC-O DF-PTMC-U DF-PTMC-NS DF-PTMC-ZB DF-PTMC-3-ZB MPS-MT MPS-IH RD UC-TM 10, UCT-TM 10 or ZB 10 (see Catalog 3) UC-TM 10, UCT-TM 10 or ZB 10 (see Catalog 3) For further information and full technical data, visit phoenixcontact.net/products PHOENIX CONTACT 57

Terminal blocks – CLIPLINE complete 1.5 mm2 PT Push-in connection terminal blocks 24 A, 48-pos., 288 connections 24 A, 80-pos., 480 connections       Width 66 Imax. [A] 241) IEC 60947-7-1 IEC Technical data Length 102 Umax. [V] 500 Height 30 max. Ø [mm²] 0.14 - 2.5 UL / CUL CSA Width 110 Imax. [A] 241) IEC 60947-7-1 IEC Technical data Length 102 Umax. [V] 500 Height 30 max. Ø [mm²] 0.14 - 2.5 UL / CUL CSA AWG (UL) 24-16 IEC/ EN 60079-7 - - - 300 10 / - 24-16 500 17.51) / - 26 - 14 Rigid 0.14 - 2.5 0.34 - 2.5 300 10 24-16 Flexible 0.14 - 1.5 - Ferrule without/with plastic sleeve 0.14 - 1.5 0.14 - 1.5 0.34 - 1.5 0.34 - 1.5 AWG (UL) 24-16 IEC/ EN 60079-7 - - - 300 10 / - 24-16 300 10 24-16 Flexible 0.14 - 1.5 - Ferrule without/with plastic sleeve 0.14 - 1.5 0.14 - 1.5 0.34 - 1.5 0.34 - 1.5 500 17.51) / - 26 - 14 Rigid 0.14 - 2.5 0.34 - 2.5 Type Ordering data Ordering data Order No. Pcs./Pkt. Type Order No. Pcs./Pkt. PTMC 1,5/48-3 PTMC 1,5/48-3 /BU FTMC 1,5/48-3 FTMC 1,5/48-3 /BU DF-PTMC-O DF-PTMC-U DF-PTMC-NS DF-PTMC-ZB DF-PTMC-3-ZB MPS-MT MPS-IH RD Accessories 3270318 3270320 3270358 3270360 3270400 3270401 3270403 3270410 3270405 0201744 0201676 10 10 10 10 10 10 10 10 10 10 10 PTMC 1,5/80-3 PTMC 1,5/80-3 /BU FTMC 1,5/80-3 FTMC 1,5/80-3 /BU DF-PTMC-O DF-PTMC-U DF-PTMC-NS DF-PTMC-ZB DF-PTMC-3-ZB MPS-MT MPS-IH RD Accessories 3270324 3270326 3270364 3270366 3270400 3270401 3270403 3270410 3270405 0201744 0201676 6 6 6 6 10 10 10 10 10 10 10 UC-TM 10, UCT-TM 10 or ZB 10 (see Catalog 3) UC-TM 10, UCT-TM 10 or ZB 10 (see Catalog 3) For further information and full technical data, visit phoenixcontact.net/products PHOENIX CONTACT 59

Terminal blocks – CLIPLINE complete 1.5 mm2 PT Push-in connection terminal blocks 24 A, 48-pos., 192 connections 24 A, 80-pos., 320 connections       Width 66 Imax. [A] 241) IEC 60947-7-1 IEC Technical data Length 73.2 Umax. [V] 500 Height 30 max. Ø [mm²] 0.14 - 2.5 UL / CUL CSA Width 110 Imax. [A] 241) IEC 60947-7-1 IEC Technical data Length 73.2 Umax. [V] 500 Height 30 max. Ø [mm²] 0.14 - 2.5 UL / CUL CSA AWG (UL) 24-16 IEC/ EN 60079-7 - - - 300 10 / - 24-16 500 17.51) / - 26 - 14 Rigid 0.14 - 2.5 0.34 - 2.5 300 10 24-16 Flexible 0.14 - 1.5 - Ferrule without/with plastic sleeve 0.14 - 1.5 0.14 - 1.5 0.34 - 1.5 0.34 - 1.5 AWG (UL) 24-16 IEC/ EN 60079-7 - - - 300 10 / - 24-16 300 10 24-16 Flexible 0.14 - 1.5 - Ferrule without/with plastic sleeve 0.14 - 1.5 0.14 - 1.5 0.34 - 1.5 0.34 - 1.5 500 17.51) / - 26 - 14 Rigid 0.14 - 2.5 0.34 - 2.5 Type Ordering data Ordering data Order No. Pcs./Pkt. Type Order No. Pcs./Pkt. PTMC 1,5/48-2 PTMC 1,5/48-2 /BU FTMC 1,5/48-2 FTMC 1,5/48-2 /BU DF-PTMC-O DF-PTMC-U DF-PTMC-NS DF-PTMC-ZB DF-PTMC-2-ZB MPS-MT MPS-IH RD Accessories 3270322 3270323 3270362 3270363 3270400 3270401 3270403 3270410 3270406 0201744 0201676 10 10 10 10 10 10 10 10 10 10 10 PTMC 1,5/80-2 PTMC 1,5/80-2 /BU FTMC 1,5/80-2 FTMC 1,5/80-2 /BU DF-PTMC-O DF-PTMC-U DF-PTMC-NS DF-PTMC-ZB DF-PTMC-2-ZB MPS-MT MPS-IH RD Accessories 3270329 3270330 3270368 3270369 3270400 3270401 3270403 3270410 3270406 0201744 0201676 6 6 6 6 10 10 10 10 10 10 10 UC-TM 10, UCT-TM 10 or ZB 10 (see Catalog 3) UC-TM 10, UCT-TM 10 or ZB 10 (see Catalog 3) For further information and full technical data, visit phoenixcontact.net/products PHOENIX CONTACT 61