TRIO-UPS-2G/3AC/24DC/20 - Uninterruptible power supply - 2906367

Notes

Note on application
Note on application	As things stand now, we are preparing the product so that, as of December 11, 2027, it will comply with the requirements of the EU Cyber Resilience Act (CRA) based on the information currently available regarding the CRA.

Input data

AC operation
Input voltage range	3x 400 V AC ... 500 V AC -20 % ... +15 %
	2x 400 V AC ... 500 V AC -10 % ... +10 %
Voltage type of supply voltage	AC
Inrush current	< 17.5 A
Inrush current integral (I²t)	< 0.76 A²s
Frequency range (f_N)	50 Hz ... 60 Hz (±10 %)
Mains buffering time	≥ 25 ms (400 V AC)
Switch-on time	typ. 200 ms
Typical current consumption	3x 1.3 A (400 V AC)
Input fuse	6.3 A (slow-blow, internal)

Output data

Efficiency	typ. 93 % (400 V AC)
		typ. 92 % (480 V AC)
		typ. 94 % (Battery operation)
Derating	> 60 °C (2.5%/K of P_Outnom.)
Crest factor	2.5 (400 V AC)
Crest factor		2.6 (480 V AC)
Switch-over time	< 20 ms
UPS connection in parallel	yes, with diode module uncoupled
UPS connection in series	no
Energy storage device connection in parallel	yes
Feedback voltage resistance	≤ 35 V DC
Protection against overvoltage at the output (OVP)	< 30 V DC
Residual ripple	< 20 mV
Control deviation	< 0.3 % (change in load, static 10 % ... 90 %)
		< 5.9 % (Dynamic load change 10 % ... 90 %, 10 Hz)
		< 0.05 % (change in input voltage ±10 %)
Rise time	< 30 ms
Permissible backup fuse	B10
Mains operation
Output voltage	24 V DC
Output voltage range	24 V DC ... 28 V DC (> 24 V constant capacity)
Output current I_N	20 A
Dynamic BOOST (I_Dyn.Boost)	30 A
Output power P_OUT (U_N, I_OUT = I_N)	480 W
Maximum no-load power dissipation	< 3.6 W (400 V AC)
Power loss nominal load max.	< 36 W (480 V AC)
Battery operation
Output voltage	U_BAT-0.1 V DC
Output voltage range	18 V DC ... 30 V DC
Output current I_N	20 A
Dynamic BOOST (I_Dyn.Boost)	30 A

Energy storage

Nominal voltage U_N	24 V DC
End-of-charge voltage	max. 30 V DC
Charging current (Configurable)	0.2 A ... 3 A (-25 °C ... 40 °C)
Charging current (Reduced)	3 A ... 0 A (40 °C ... 65 °C)
Charging current (Preset)	2.1 A (-25 °C ... 40 °C)
Charging current (max.)	3 A
Nominal capacity range	4 Ah ... 40 Ah
Battery technology	VRLA-AGM
Charge characteristic curve	IU₀U

Connection data

Input
Position	1.x
Conductor connection
Connection method	Push-in connection
rigid	0.2 mm² ... 4 mm²
flexible	0.2 mm² ... 2.5 mm²
flexible with ferrule without plastic sleeve	0.25 mm² ... 2.5 mm²
flexible with ferrule with plastic sleeve	0.25 mm² ... 1.5 mm²
AWG	24 ... 12
Stripping length	10 mm
Output
Position	2.x
Conductor connection
Connection method	Push-in connection
rigid	0.2 mm² ... 10 mm²
flexible	0.2 mm² ... 6 mm²
flexible with ferrule without plastic sleeve	0.25 mm² ... 6 mm²
flexible with ferrule with plastic sleeve	0.25 mm² ... 4 mm²
AWG	24 ... 8
Stripping length	15 mm
Signal
Position	3.x
Conductor connection
Connection method	Push-in connection
rigid	0.2 mm² ... 1.5 mm²
flexible	0.2 mm² ... 1.5 mm²
flexible with ferrule without plastic sleeve	0.2 mm² ... 1.5 mm²
flexible with ferrule with plastic sleeve	0.2 mm² ... 0.75 mm²
AWG	24 ... 16
Stripping length	8 mm
Battery
Position	4.x
Conductor connection
Connection method	Push-in connection
rigid	0.2 mm² ... 10 mm²
flexible	0.2 mm² ... 6 mm²
flexible with ferrule without plastic sleeve	0.25 mm² ... 6 mm²
flexible with ferrule with plastic sleeve	0.25 mm² ... 4 mm²
AWG	24 ... 8
Stripping length	15 mm

Interfaces

Interface	USB (Modbus/RTU)
Number of interfaces	1
Connection method	MINI-USB Type B
Locking	Screw

Signaling

Signal input Remote
Connection labeling	3.5
Signalization designation	Remote
Low signal	Connection to SGnd with < 2.7 kΩ
High signal	Open (> 35 kΩ between Remote and SGnd)
Signal input Bat.-Start
Connection labeling	3.6
Signalization designation	Bat.-Start
Low signal	Connection to SGnd with < 2.7 kΩ
High signal	Open (> 200 kΩ between Bat.-Start and SGnd)
Signal output DC OK
Connection labeling	3.1
Signalization designation	DC OK
Type of signaling	Green LED
Switching output	Transistor output, active
Output voltage	24 V DC
Continuous load current	20 mA
LED status indicator	green
Signal output Alarm
Connection labeling	3.2
Signalization designation	Alarm
Type of signaling	LED red
Switching output	Transistor output, active
Output voltage	24 V DC
Continuous load current	20 mA
LED status indicator	red
Signal output Battery Mode
Connection labeling	3.3
Signalization designation	Battery mode
Type of signaling	Yellow LED
Switching output	Transistor output, active
Output voltage	24 V DC
Continuous load current	20 mA
LED status indicator	yellow
Signal output Ready
Connection labeling	3.4
Signalization designation	Ready
Switching output	Transistor output, active
Output voltage	24 V DC
Continuous load current	20 mA

Electrical properties

Number of phases	3
Insulation voltage input/output	4 kV AC (type test)
	2 kV AC (routine test)
Insulation voltage output / PE	500 V AC
	500 V AC (routine test)
Insulation voltage input / PE	type test
	2 kV AC (routine test)

Product properties

Product type	DC UPS with integrated power supply
Product family	TRIO DC UPS with integrated power supply
MTBF (IEC 61709, SN 29500)	> 1108720 h (400 V AC, at 25 °C)
		> 680194 h (400 V AC, at 40 °C)
		> 323816 h (400 V AC, at 60°C)
Special properties	The product is being prepared for compliance with the Cyber Resilience Act (CRA)
Insulation characteristics
Protection class	I
Overvoltage category (EN 61010-1)	II
Degree of pollution	2
Life expectancy (electrolytic capacitors)
Current	20 A
Temperature	40 °C
Time	71552 h
Additional text	400 V AC

Dimensions

Item dimensions
Width	88 mm
Height	130 mm
Depth	160 mm
Item dimensions with alternative mounting
Width	160 mm
Height	130 mm
Depth	88 mm
Installation dimensions
Installation distance right/left	0 mm / 0 mm
Installation distance top/bottom	50 mm / 50 mm

Mounting

Mounting type	DIN rail mounting
Assembly note	alignable: horizontally 0 mm, vertically 50 mm
Mounting position	horizontal DIN rail NS 35, EN 60715

Material specifications

Flammability rating according to UL 94 (housing / terminal blocks)	V0
Housing material	Metal
Hood version	PC
Side element version	Aluminum

Environmental and real-life conditions

Ambient conditions
Degree of protection	IP20
Ambient temperature (operation)	-25 °C ... 70 °C (> 60 °C Derating: 2,5 %/K)
Ambient temperature (storage/transport)	-40 °C ... 85 °C
Ambient temperature (start-up type tested)	-40 °C
Maximum altitude	≤ 4000 m (> 2000 m, observe derating)
Climatic class	3K3 (in acc. with EN 60721)
Max. permissible relative humidity (operation)	≤ 95 % (at +25 °C, non-condensing)
Shock	30g, 18 ms in accordance with IEC 60068-2-27
Vibration (operation)	< 12 ... 13.2 Hz, amplitude ±1 mm, 13.2 ... 100 Hz, 0.7g in accordance with IEC 60068-2-6

Standards and regulations

Safety for measurement, control, and laboratory equipment
Standard designation	Safety for equipment for measurement, control, and laboratory use
Standards/specifications	IEC 61010-1
Safety extra-low voltage
Standard designation	Safety extra-low voltage
Standards/specifications	IEC 61010-1 (SELV)
Protective extra-low voltage
Standard designation	Protective extra-low voltage
Standards/specifications	IEC 61010-2-201 (PELV)
Safe isolation
Standard designation	Safe isolation
Standards/specifications	DIN VDE 0100-410
Low-voltage power supplies, DC output
Standard designation	Low-voltage power supplies, DC output
Standards/specifications	EN 61204-3
Ship’s bridge
Standard designation	Ship’s bridge
Standards/specifications	IEC/EN 60945

Approvals

UL
Identification	UL Listed UL 61010
UL
Identification	UL/C-UL Listed ANSI/ISA-12.12.01 Class I, Division 2, Groups A, B, C
Shipbuilding
Identification	DNV
Shipbuilding
Identification	LR

EMC data

Electromagnetic compatibility	Conformance with EMC Directive 2014/30/EU
Low Voltage Directive	Conformance with Low Voltage Directive 2014/35/EC
EMC requirements for noise emission	EN 61000-6-3
EMC requirements for noise emission		EN 61000-6-4
EMC requirements for noise immunity	EN 61000-6-1
EMC requirements for noise immunity		EN 61000-6-2
Noise immunity	Immunity in accordance with EN 61000-6-2 (industrial)
Conducted noise emission
Standards/regulations	EN 61000-6-3
Noise emission
Standards/regulations	EN 61000-6-3
DNV GL conducted noise emissions
DNV	Class B
Additional text	Area power distribution
DNV GL noise radiation
DNV	Class B
Additional text	Bridge and deck area
Harmonic currents
Standards/regulations	EN 61000-3-2
Flicker
Standards/regulations	EN 61000-3-3
Electrostatic discharge
Standards/regulations	EN 61000-4-2
Electrostatic discharge
Contact discharge	6 kV (Test Level 3)
Discharge in air	8 kV (Test Level 3)
Electromagnetic HF field
Standards/regulations	EN 61000-4-3
Electromagnetic HF field
Frequency range	80 MHz ... 6 GHz
Test field strength	10 V/m
Frequency range	1.4 GHz ... 6 GHz
Test field strength	3 V/m
Fast transients (burst)
Standards/regulations	EN 61000-4-4
Fast transients (burst)
Input	4 kV
Output	2 kV
Signal	2 kV
Surge voltage load (surge)
Standards/regulations	EN 61000-4-5
Surge voltage load (surge)
Input	2 kV (Test Level 4 - symmetrical)
Input		4 kV (Test Level 4 - asymmetrical)
Output	1 kV (Test Level 3 - symmetrical)
Output		2 kV (Test Level 3 - asymmetrical)
Signal	1 kV (Test Level 2 - asymmetrical)
Conducted interference
Standards/regulations	EN 61000-4-6
Conducted interference
Frequency range	0.15 MHz ... 80 MHz
Voltage	10 V
Attenuated sinusoidal oscillations (ring wave)
Standards/regulations	EN 61000-4-12
Input	2 kV (symmetrical)
Input		4 kV (asymmetrical)
Comments	Criterion A

Item number	2906367
Packing unit	1 pc
Minimum order quantity	1 pc
Product key	CMUO33
GTIN	4055626068053
Weight per piece (including packing)	2,054 g
Weight per piece (excluding packing)	1,733 g
Customs tariff number	85044095
Country of origin	CN

ECLASS-13.0	27040705
ECLASS-15.0	27040705

EU RoHS
Fulfills EU RoHS substance requirements	Yes
Exemption	6(c), 7(a), 7(c)-I, 7(c)-II
China RoHS
Environment friendly use period (EFUP)	EFUP-25 An article-related China RoHS declaration table can be found in the download area for the respective article under "Manufacturer declaration". For all articles with EFUP-E, no China RoHS declaration table issued and required.
EU REACH SVHC
REACH candidate substance (CAS No.)	Lead\|7439-92-1 (CAS: n/a)
SCIP	eb6ca739-9ca9-45a5-ba85-1c4906236287
EF3.1 Climate Change
CO2e kg	240.5 kg CO2e

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

TRIO-UPS-2G/3AC/24DC/20 - Uninterruptible power supply

2906367

Product details

ECLASS

ETIM

UNSPSC

DNV

IECEE CB Scheme

EAC

LR

EAC

UL Listed

cUL Listed

BSH

KC

IECEE CB Scheme

cUL Listed

UL Listed

BSH

LR

EAC

EAC

KC

DNV

NK

NK

cUL Listed

UL Listed

UL Listed

cUL Listed

Compatible products

Your advantages

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

TRIO-UPS-2G/3AC/24DC/20 - Uninterruptible power supply 2906367

Product details

ECLASS

ETIM

UNSPSC

Compatible products

TRIO-BAT/PB/24DC/4AH - Battery module 1394730

TRIO-BAT/PB/24DC/7AH - Battery module 1384031

TRIO-BAT/PB/24DC/12AH - Battery module 1394727

UPS-BAT/PB/24DC/4AH - Battery module 1274117

UPS-BAT/PB/24DC/7AH - Battery module 1274118

UPS-BAT/PB/24DC/12AH - Battery module 1274119

UPS-BAT/PB/24DC/20AH - Battery module 1348516

UPS-BAT/PB/24DC/40AH - Battery module 1354641

UPS-BAT/VRLA-WTR/24DC/13AH - Battery module 2320416

UPS-BAT/VRLA-WTR/24DC/26AH - Battery module 2320429

MINI-SCREW-USB-DATACABLE - Data cable 2908217

UWA 130 - Mounting adapter 2901664

UWA 182/52 - Mounting adapter 2938235

POWER MANAGEMENT SUITE - Configuration software 1252232

Your advantages

TRIO-UPS-2G/3AC/24DC/20 - Uninterruptible power supply

2906367