PSR-SCP-230UC/ESAM4/3X1/1X2/B - Safety relays

2901428

Safety relay for emergency stop and safety door monitoring up to SIL 3 or Cat. 4, PL e in accordance with EN ISO 13849, 2-channel operation, 3 enabling current paths, nominal input voltage: 230 V AC/DC, plug-in screw terminal blocks

Free download available. Downloads

Note on application
Note on application	Only for industrial use

Product type	Safety relays
Product family	PSRclassic
Application	Emergency stop
	Safety door
Control	2-channel
Mechanical service life	approx. 10⁷ cycles
Relay type	Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
Insulation characteristics
Overvoltage category	II, III (See the section “Insulation coordination”)
Degree of pollution	2
Times
Typical response time	300 ms (automatic start)
	40 ms (manual, monitored start)
Typ. starting time with U_s	330 ms (when controlled via A1)
Typical release time	20 ms (when controlled via S11/S12 and S21/S22)
	150 ms (when controlled via A1)
Recovery time	1 s

Maximum power dissipation for nominal condition	16.4 W (At I_L² = 72 A²,P_Total max = 2 W + 14.4 W)
Nominal operating mode	100% operating factor
Rated insulation voltage	250 V AC
Rated surge voltage/insulation	4 kV / basic insulation (safe isolation, reinforced insulation, and 6 kV between A1-A2/logic/enabling and signaling current paths)
Supply
Designation	A1/A2
Rated control circuit supply voltage U_S	230 V AC -15 % / +10 %
Rated control supply current I_S	typ. 22 mA (at U_N)
Apparent power	typ. 4.5 VA (at U_N)
Protective circuit	Surge protection
	Varistor

Digital: Sensor circuit (S12, S22)
Description of the input	safety-related
Concurrence	∞
Max. permissible overall conductor resistance	50 Ω
Protective circuit	Surge protection
	Suppressor diode
Digital: Start circuit (S34)
Description of the input	non-safety-related
Concurrence	∞
Max. permissible overall conductor resistance	50 Ω
Protective circuit	Surge protection
	Suppressor diode

Relay: Enabling current paths (13/14, 23/24, 33/34)
Number of outputs	3 (undelayed)
Contact switching type	3 enabling current paths
Contact material	AgSnO₂, + 0.2 µm Au
Switching voltage	min. 10 V AC/DC
	max. 250 V AC/DC
Switching power	min. 100 mW
Inrush current	min. 10 mA
	max. 6 A
Switching capacity	6 A (24 V (DC13))
	5 A (230 V (AC15))
Limiting continuous current	6 A (observe derating)
Sq. Total current	72 A² (observe derating)
Switching frequency	max. 0.5 Hz
Mechanical service life	10x 10⁶ cycles
Interrupting rating (ohmic load) max.	see load limit curve
Output fuse	10 A gL/gG NEOZED
Relay: Signaling current path (41/42)
Number of outputs	1 (undelayed)
Contact switching type	1 signaling current path
Contact material	AgSnO₂, + 0.2 µm Au
Switching voltage	min. 10 V AC/DC
	max. 250 V AC/DC
Switching power	min. 100 mW
Inrush current	min. 10 mA
	max. 6 A
Limiting continuous current	5 A
Sq. Total current	72 A² (observe derating)
Switching frequency	max. 0.5 Hz
Output fuse	6 A gL/gG NEOZED

Connection technology
pluggable	yes
Conductor connection
Connection method	Screw connection
Conductor cross-section rigid	0.2 mm² ... 2.5 mm²
Conductor cross-section flexible	0.2 mm² ... 2.5 mm²
Conductor cross-section AWG	24 ... 12

Status display	3 x LED (green)
Operating voltage display	1 x LED (green)

Width	22.5 mm
Height	99 mm
Depth	114.5 mm

Color	yellow (RAL 1018)
Housing material	PA

Safety data
Stop category (EN 60204-1)	0
Safety data: EN ISO 13849
Performance level (PL)	e (5 A DC13; 8760 switching cycles/year)
Safety data: IEC 61508 - High demand
Safety Integrity Level (SIL)	3
Safety data: IEC 61508 - Low demand
Safety Integrity Level (SIL)	3
Safety data: EN IEC 62061
Safety Integrity Level (SIL)	3

Ambient conditions
Degree of protection	IP20
Min. degree of protection of inst. location	IP54
Ambient temperature (operation)	-25 °C ... 55 °C
Ambient temperature (storage/transport)	-40 °C ... 85 °C
Maximum altitude	≤ 2000 m (Above sea level)
Max. permissible humidity (storage/transport)	75 % (on average, 85% infrequently, non-condensing)
Max. permissible relative humidity (operation)	75 % (on average, 85% infrequently, non-condensing)
Shock	15g
Vibration (operation)	10 Hz ... 150 Hz, 2g

Conformity/Approvals
Conformance	CE-compliant

Mounting type	DIN rail mounting
Mounting position	any

Item number	2901428
Packing unit	1 pc
Minimum order quantity	1 pc
Product key	DNA114
GTIN	4046356592062
Weight per piece (including packing)	199.51 g
Weight per piece (excluding packing)	177.09 g
Customs tariff number	85371098
Country of origin	DE

Compatible products

Accessories

Your advantages

Up to Cat. 4/PL e in accordance with EN ISO 13849-1, SIL 3 in accordance with EN IEC 62061, SIL 3 in accordance with IEC 61508

Manually monitored and automatic activation in a single device

Basic insulation

1- and 2-channel control

3 enabling current paths, 1 signaling current path

ECLASS-13.0	27371819
ECLASS-15.0	27371819
ECLASS-15.0 ASSET	27250101

EU RoHS
Fulfills EU RoHS substance requirements	Yes
Exemption	7(a), 7(c)-I
China RoHS
Environment friendly use period (EFUP)	EFUP-50 An article-related China RoHS declaration table can be found in the download area for the respective article under "Manufacturer declaration". For all articles with EFUP-E, no China RoHS declaration table issued and required.
EU REACH SVHC
REACH candidate substance (CAS No.)	Lead (CAS: 7439-92-1)
SCIP	573d5547-f8c2-4c90-b439-dabfe824bf4e
EF3.1 Climate Change
CO2e kg	6.063 kg CO2e

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

PSR-SCP-230UC/ESAM4/3X1/1X2/B - Safety relays

2901428

Product details

ECLASS

ETIM

UNSPSC

cULus Listed

Functional Safety

Compatible products

Your advantages

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

PSR-SCP-230UC/ESAM4/3X1/1X2/B - Safety relays 2901428

Product details

ECLASS

ETIM

UNSPSC

Compatible products

CRIMPFOX 6 - Crimping pliers 1212034

Your advantages

PSR-SCP-230UC/ESAM4/3X1/1X2/B - Safety relays

2901428