SACC-5P-DSI-M12MS/FS-M16 - Control cabinet feed-through
1551671
Sensor/actuator control cabinet feed-through, male to female, 5-pos., M12, shielded, A-coded, bipolar/screw mounting with M16 thread
Product details
Notes on operation
The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration.
Safety note
Safety note
• WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible.
Mounting type
Bipolar mounting (M16 x 1,5)
Tightening torque
3 Nm ... 4.5 Nm (Installation-side)
Product type
Circular connectors (device side)
Number of positions
5
Shielded
no
Coding
A
Thread type
M12
Insulation characteristics
Overvoltage category
II
Degree of pollution
2
Flammability rating according to UL 94
HB
Material grommet GRP
FKM
Contact material
CuZn
Contact surface material
Au
Contact carrier material
PA 6.6
Material for screw connection
Brass, nickel-plated
Rated surge voltage
1.5 kV
Contact resistance
≤ 3 mΩ
Insulation resistance
≥ 100 MΩ
Nominal voltage UN
60 V
Nominal current IN
4 A
Mechanical data
Insertion/withdrawal cycles
> 100
Signal type/category
Universal
Connection 1
Head design
Pin
Head cable outlet
straight
Head thread type
M12
Head locking type
Screw locking mechanism
Coding
A
Connection 2
Head design
Socket
Head cable outlet
straight
Head thread type
M12
Head locking type
Screw locking mechanism
Coding
A
Ambient conditions
Degree of protection
IP65
IP67
Ambient temperature (operation) (male connector/female connector)
-25 °C ... 85 °C (Plug / socket)
Ambient temperature (operation) (fixed installation)
-40 °C ... 85 °C (without mechanical actuation)
UL Type Rating
Type 4 (indoor use only)
Standard designation
M12 circular connector
Standards/specifications
according to IEC 61076-2-101
Item number
1551671
Packing unit
1 pc
Minimum order quantity
1 pc
Product key
ABQFAA
GTIN
4046356156226
Weight per piece (including packing)
36.2 g
Weight per piece (excluding packing)
30.2 g
Customs tariff number
85366990
Country of origin
CZ
ECLASS
ECLASS-13.0
27440109
ECLASS-15.0
27440109
ETIM
ETIM 10.0
EC003569
UNSPSC
UNSPSC 21.0
39121400
EU RoHS
Fulfills EU RoHS substance requirements
Yes
Exemption
6(c)
China RoHS
Environment friendly use period (EFUP)
EFUP-50
An article-related China RoHS declaration table can be found in the download area for the respective article under "Manufacturer declaration". For all articles with EFUP-E, no China RoHS declaration table issued and required.
