Fixed and Pluggable PCB Terminal Blocks
Screw Terminal Blocks in One-Piece
Screw connections use a rising cage design to secure the conductor, while alleviating stress on the solder joint. The screw connection is recommended for applications with standard I/O and low current industrial devices.
Spring Terminal Blocks in One-Piece
Spring connections offer an installation time savings over the screw connections. Some of the spring connections allow a tool-less connection with solid or ferruled wires. The spring connection is strongly recommended when working in vibration sensitive areas since it eliminates concern about the installer under or over torquing.
One piece (Fixed) with IDC Connection
Insulation Displacement Connection terminal blocks represent minimal installation cost. When comparing IDC to screw connection, a 60% time savings can be achieved. Simply insert the insulated conductor into the wire entry and actuate, eliminating wire prepping.
Two piece (Pluggable) with Screw Connection
Screw connections use a rising cage design to secure the conductor. Pluggable connections are ideal when ease of installation and ease of troubleshooting are a concern.
Two piece (Pluggable) with Spring Connection
Spring connections offer an installation time savings over the screw connections. Some of the spring connections allow a tool-less connection with solid or ferruled wires. The spring connection is strongly recommended when working in vibration sensitive areas since it eliminates concern about the installer under or over torquing. Pluggable connections are ideal when ease of installation and ease of troubleshooting are a concern.
Two piece (Pluggable) with IDC Connection
Insulation Displacement Connection terminal blocks represent minimal installation cost. When comparing IDC to screw connection, a 60% time savings can be achieved. Simply insert the insulated conductor into the wire entry and actuate, eliminating wire prepping. It is important to note that the pluggable IDC connection allows wires from 24 – 16 AWG.
Two-Piece Crimp
COMBICON THR
Designed for Pin in Paste SMT Manufacturing.